Scores from DIY Parts Yards, Pull A Part, U Pull It etc

[bucket]

Passenger car manifolds have 2" outlets, there's straight versions of those as well. Some have generator mounts and some do not.

I think ramhorn truck manifolds also had 2" outlets.

 

[Paladin]

Do want a dash clock!!

I believe I have a complete gauge cluster out of the CC Dually I used for parts that has the clock. Has been awhile since I've seen it but can check in my storage building tomorrow. If I do I'll list it for sale tomorrow afternoon.

 

[DoubleDingo]

Passenger car manifolds have 2" outlets, there's straight versions of those as well. Some have generator mounts and some do not.

I think ramhorn truck manifolds also had 2" outlets.

That's what I thought. I like those angled outlets. They do have the smog ports, so I'll have to plug those. They wanted $150 for the pair, which I didn't comment because I wasn't there to buy anything during that visit. I'm hoping to get the entire engine for $200, but they'll probably want more because they pull it for you and this particular truck is tucked in the middle of a bunch of other vehicles, so it'll be a chore to get it to a spot I can load it in the back of the truck.

 

[78C10BigTen]

Managed to snatch up a freebie factory 8" ralleye wheel for my c10 from work. 2 more and ive got 2 complete sets.

You must be registered for see images attach

 

[Frankenchevy]

My buddy was given this 1972 c10 for free last week by a construction client. The guy who gave it to him is a multi millionaire that just wanted it gone from his recently deceased uncle’s property. It has bad gas but runs and it seriously has NO rust anywhere on the body besides some fender patina and rain gutter patina. Nothing wrong with the title and it’s registration is current. He’s not even a Chevy guy...yet. He has a couple super duty fords.

First thing he did was transport it to a resto guy. Just doing all the mechanical freshening, new interior and wheels for now. Pretty awesome luck. My wife was jealous to say the least, as we a currently in the hunt for a 72 or older k10/20 to restore for her. I’ll throw some after pictures up when he gets it back. Resto guy said 2-4 weeks. Kinda interested in what all will be done. Initial bill for my buddy is $10k parts/labor so it should be pretty decent.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[DoubleDingo]

@Frankenchevy If he tosses the fog lights I'll take them. I have a period correct truck they can go on.

 

[Frankenchevy]

@Frankenchevy If he tosses the fog lights I'll take them. I have a period correct truck they can go on.

Ha! I already asked him the same thing. They are nice KCs

 

[DoubleDingo]

Ha! I already asked him the same thing. They are nice KCs

It was worth a shot

 

[Frankenchevy]

It was worth a shot

It’s the first thing I asked him! If I don’t end up using them, I’ll send them your way.

 

[DoubleDingo]

SWEET!

 

[bigcountry78]

@Frankenchevy If he tosses the fog lights I'll take them. I have a period correct truck they can go on.

That was my first thought too, where are the fog lights going lol

 

[78C10BigTen]

Heres todays harvest from the local you yank it. Cherokee steering shaft to upgrade, 2 nice dog dish caps and 2 tow mirrors.

You must be registered for see images attach

 

[78C10BigTen]

Todays junkyard harvest. Another pair of mirrors, stainless marker trim and a hood.

You must be registered for see images attach

 

[DBarre]

Yesterday I picked up a big block fan and shroud and a good left taillight lens. There's still a lot of good parts on the C20 Suburban I pulled from. Too bad both taillight lenses weren't good, I wanted the right side.

You must be registered for see images attach

 

[80BrownK10]

I pulled this original grill and mounts from Pull A Part. It was $20. Original off a 79. It has cracks on the left and right side , like if you were to fold in half lengthwise. I roughed it up and took scrap plastic with epoxy and gusseted the insides and then any small hairline cracks on the back of anything I saw from back. Stiff as new now. Only issue is the upper left corner missing. But original grill are getting hard to find. I painted it aluminum colored and sprayed clear. All rattle can. I also got the bowtie. It's now on my 80.

You must be registered for see images attach

You must be registered for see images attach

I also got the sun visors which I sold, and made a few dollars on eBay. I also have four trim rings and three dog dish caps that I pulled from it.