Transfer case lever doesn't fit and housing missing?

[87drthy]

Thank you. That's what I was starting to think.

 

[87drthy]

Is there an id tag on it or serial number somewhere that I could know which one it is? I can't seem to find one.

 

[RoryH19]

There is a round disk with the info. See first tcase pic I sent.

 

[PrairieDrifter]

Should be on the backside of the case in the middle.

 

[71RAT]

This is all i have under the plastic bezel. No metal housing with clips, no metal guide. Guess I'm ordering those.

You must be registered for see images attach

That looks like a np203 shifter. Your original should be a np208, aluminum case. 203 is mostly cast iron and has a PTO cover on drivers side, see pic;

You must be registered for see images attach

 

[bucket]

That looks like a np203 shifter. Your original should be a np208, aluminum case. 203 is mostly cast iron and has a PTO cover on drivers side, see pic;

You must be registered for see images attach

I agree, it looks like a 203 has been swapped into the truck.

 

[highdesertrange]

that is not the right shifter for that cover.

take a picture of the transfer case from the back looking forward and we can ID it.

why would anyone swap in a 203?

highdesertranger

 

[bucket]

why would anyone swap in a 203?

Because they have a truck without a drivetrain and also happen to have a trans/203 combo laying around?