Scores from DIY Parts Yards, Pull A Part, U Pull It etc

[PrairieDrifter]

Got a 70's tilt column for a 4 speed manual for $250, complete, in pretty good shape. Also picked up a bare f*rd 9 inch housing for $50. Apparently it's the best one? By axle bearing size anyways, it has the biggest axle bearing, new ford big style flanges. I know NOTHING about fords other than a little dabbling. There's a reason I hate fords too, there's like 30 variations of 9 inches lolol. It's ridiculous how long it took me to find answers.

My plan is if everything measures up good, I'll take the 12 bolt out of my 70 and put it under the 48, since the 48 is gonna be a cruiser not a hot rod. Then the 9 inch can go in my 70 since I'm definitely gonna beat on that lol. Plus I'd like to cruise the 70 every once in a while as well, maybe long road trips, easy to swap two third members when I want.

You must be registered for see images attach

You must be registered for see images attach

 

[Catbox]

Went to the junkyard last weekend as I thought it was the 75% off sale, nope.
That is this week.
But we got some goodies any how as it was all still 50% off.

4th Gen window washer fluid container.
This will mount in the nose of the girls Camaro under the panel and out of the way of the air ducts to clean up the driver side inner fender.

You must be registered for see images attach

4th Gen window radiator overflow container.
This will mount under the battery and in the fender of the girls Camaro to clean up the passenger side inner fender.
Both of these will clean up the engine bay in a big way once installed.

You must be registered for see images attach

Max pulled a Grand Cherokee steering box for his truck.
This will bolt right in place of the stock S10 manual box he is rocking now.
Using a set of 4.3 serpentine pully brackets with matching power steering pump that I have, he can pretty much have budget power steering with a way better ratio for cheaps.

You must be registered for see images attach

I picked up a DR44 alternator as I found a thread that showed how simple it is to swap in on my Suburban and the girls Camaro, whelp I had to see it for myself.
For the $22 out the door, I figured I would give it a try for the 145 amps it puts out.

You must be registered for see images attach

You must be registered for see images attach

 

[Catbox]

Max found a fancy Porsche horn for his VW.

You must be registered for see images attach

The Camaro has twisted together wires at the injectors, so I found 3 sets of them and picked them all up.

You must be registered for see images attach

I found a 454 TBI throttle body and snapped it up as well.
It has the newer style base and its 2 inch throttle plates.
Never know, I might get excited and start feeling like delving into TBI tuning and chip burning.
If that is the case then I will need the hard parts as well to be able to what I want.

You must be registered for see images attach

454 versus a 350 throttle body.

You must be registered for see images attach

Clearly they did a great job...

You must be registered for see images attach

 

[Catbox]

From the same Porsche, Max found this cool aluminum air tank in the rear of it.

You must be registered for see images attach

It will be repurposed into a cool moon tank-ish fuel tank on his '55 Bel Air.
Here it is just sitting on the front of the car.

You must be registered for see images attach

I was looking around a Dodge Magnum and spotted it had a battery tray in the back of it.
Digging in, it runs a piece of 1ga welding wire from back to front for the main power wire.
So I dug about 12 feet of wire out and took it home.

You must be registered for see images attach

Ran right next to that, was the main harness.
I figured that I am out of small wires for random projects and it came out as well.

You must be registered for see images attach

So now I have a 12 foot bundle of wires to use on projects coming up.

You must be registered for see images attach