Air Compressor Time

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OkieFishMan

Certified Camping and Fishing Nut
Joined
May 8, 2017
Posts
371
Reaction score
203
Location
Enid, OK
First Name
OkieFishMan
Truck Year
1984
Truck Model
GMC C2500
Engine Size
454/SM465
I think 2 stage is the way to go, no doubt. Especially if you have something that's going to eat air like a media blaster. If its just hand tools and what not, a 60 gal 2 stage would be overkill.
 

4WDKC

Full Access Member
Joined
Jan 27, 2016
Posts
2,366
Reaction score
1,090
Location
Southern Florida
First Name
Kacy
Truck Year
1987
Truck Model
V10
Engine Size
350
I bought this one a couple of years ago, I was told Industiral Air was making the compressors for several brands and there was a 20% off coupon on black friday that applied to the compressors at the local Rural King store.

You must be registered for see images attach
 

Mr Clean

Super Moderator
Staff member
Super Moderator
Joined
Aug 18, 2010
Posts
10,322
Reaction score
10,214
Location
North East Texas
First Name
Shawn
Truck Year
1982 & 1985
Truck Model
K10 Extra Cab w/ Proper SWB, & 85 K5 Blazer
Engine Size
454 BBC, & 383 Stroker
What are y'all pulling under it so it don't break the concrete

Sent from my SAMSUNG-SM-G935A using Tapatalk
 

74 Shortbed

Full Access Member
Joined
Aug 12, 2013
Posts
6,306
Reaction score
1,413
Location
*
First Name
*
Truck Year
*
Truck Model
*
Engine Size
*
I made a wood base for mine and mounted it with vibration pads to the base, eases vibration and noise.
 

87scotty

Full Access Member
Joined
Oct 8, 2015
Posts
1,087
Reaction score
319
Location
Central il
First Name
Andrew
Truck Year
1987
Truck Model
V20
Engine Size
5.7 for now
X2 on running extra storage tank but...

You must be registered for see images attach
 

87scotty

Full Access Member
Joined
Oct 8, 2015
Posts
1,087
Reaction score
319
Location
Central il
First Name
Andrew
Truck Year
1987
Truck Model
V20
Engine Size
5.7 for now
I'm running this on these

You must be registered for see images attach


You must be registered for see images attach
 

Honky Kong jr

Super Sarcastic Man
Joined
Jun 14, 2016
Posts
14,968
Reaction score
9,828
Location
Denver,PA
First Name
J-me
Truck Year
87
Truck Model
V10
Engine Size
Lil BB 407
Mine has rubber feet.
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,439
Reaction score
28,345
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
Do you have a Lowes near you? I bought mine from Lowes. They special order it. It sells for $1299. But you get on ebay and pay like $4 for a 10% off coupon. Then you use it on the compressor and get it for $1170 instead of $1300. Oh, and you buy the oil change/filter kit so that you get a free extended warranty. It is an absolutely awesome compressor.

https://www.lowes.com/pd/Quincy-Compressor-60-Gallon-Electric-Air-Compressor/50073343

That's the one I got too, the performance out of it is incredible.

This is the one I was looking at from Tractor Supply.
https://www.tractorsupply.com/tsc/product/ingersoll-rand-80-gallon-5-hp-reciprocating-air-compressor

But y'all say a 60 gallon would work for my needs, they have this one one sale also.
https://www.tractorsupply.com/tsc/p...5-5-hp-60-gallon-high-capacity-air-compressor
but it is a single stage, from what I have been reading 2 stage is the way to go

All depends on the quality of the compressor, the cheaper units often have poor flow numbers. An 80 gallon compressor can be a better choice then.
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,439
Reaction score
28,345
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
I've also got mine on 4x4 wood blocks. It's smooth running enough though, it could probably set right on the concrete and be fine.
 

foamypirate

Full Access Member
Joined
Jul 30, 2010
Posts
3,302
Reaction score
456
Location
Central TX
First Name
Jake (Mr. Wilson)
Truck Year
1980
Truck Model
El Camino, baby!
Engine Size
5.3L/4L60E
Quincy!

The basic 60 gal unit has very very good flow specs and is 100% American made too. Way better than a larger cheaper unit. Not much over the 1K budget either.

x2. EXCELLENT compressor. I've got one myself, and I've been very happy with it. From blasting, wide open die grinder, HVLP spraying, etc. I haven't had anything it can't handle yet.

For mounting, I just cut out some old tire treads to go between the floor and feet and anchored it down to the concrete.
 
Last edited:

bluex

Full Access Member
Joined
May 9, 2013
Posts
1,971
Reaction score
2,576
Location
Spartanburg SC
First Name
Paul
Truck Year
1978
Truck Model
C15
Engine Size
350
But y'all say a 60 gallon would work for my needs, they have this one one sale also.
https://www.tractorsupply.com/tsc/p...5-5-hp-60-gallon-high-capacity-air-compressor
but it is a single stage, from what I have been reading 2 stage is the way to go

I have an earlier model of this one, its an SS-3 an the pump was made in India. I got it from tractor supply when they were phasing the model # out. I had to drive two hours to get it but it was like $350 or $400. So far its done everything ive needed no problem. I got it planning on doing sandblasting an painting myself but I havent yet. For the price I paid for it I'm extremely happy with it.

Oh an for mounting we had some old antifatigue mats at work they were throwing out. I cut a small piece off an cut squares about 4x4 to go under the feet an anchored it down.
 

OkieFishMan

Certified Camping and Fishing Nut
Joined
May 8, 2017
Posts
371
Reaction score
203
Location
Enid, OK
First Name
OkieFishMan
Truck Year
1984
Truck Model
GMC C2500
Engine Size
454/SM465

Camar068

Supporting Member
Supporting Member
Joined
Feb 5, 2014
Posts
4,293
Reaction score
3,339
Location
Kentucky
First Name
David
Truck Year
1986
Truck Model
K10/LM7 5.3/4L60e/np208/3.73/32"
Engine Size
10 yrs Air Force
I'd read up on the Ingersal-Rand before I bought one new. Local rebuilder/seller said the newer ones aren't as dependable as the old ones. I haven't verified this so it'd be a good idea to see what google says.
 

vicnation

Full Access Member
Joined
Mar 31, 2016
Posts
72
Reaction score
5
Location
NC
First Name
Tristan
Truck Year
1976
Truck Model
k10
Engine Size
350

Forum statistics

Threads
44,163
Posts
950,679
Members
36,276
Latest member
2manysquares2care
Top