87 2500 4x4 truck build

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Jack135

Junior Member
Joined
Feb 9, 2021
Posts
4
Reaction score
0
Location
CAMDENTON
First Name
Tom
Truck Year
1987
Truck Model
2500 4x4 Suburban
Engine Size
350
I have a 1987 2500 4x4 that I'm restoring.
I have a 350 motor, 400 turbo transmission and a 4:10 rearend.
I'm using this truck for a farm truck and a daily driver.
Will the truck to be able to pull a 5th wheel.
Will this be able to pull a load of hay without a problem?
Also as far as driving it to town or camping will it go 70mph?
Any idea of fuel mileage?
 

1973c10

Full Access Member
Joined
Sep 25, 2015
Posts
6,376
Reaction score
24,020
Location
Oregon
First Name
Don
Truck Year
1973
Truck Model
C10
Engine Size
454
Welcome aboard :boti:
 

77 K20

Full Access Member
Joined
Nov 9, 2012
Posts
3,107
Reaction score
3,144
Location
Montana
First Name
Mike
Truck Year
1977
Truck Model
K20 5" lift
Engine Size
HT383 fuel injected
You have a good rear end ratio for pulling.

Depends on the weight of the 5th wheel.

Not advisable towing at 70 mph. Better to slow down as trailer tires usually aren't happy at speed (speed equals heat, then blowout).

It *could* probably tow at 70 mph but then your fuel economy will greatly suffer.
 

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
7,077
Reaction score
12,446
Location
Auburn, Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
Welcome!
Depends how much snort the 350 has. Every thing else is the best of 70s/80s towing technology! Lol
Actually I forgot how solid my 86 towed. Stock 454 Vortec with a carb. Runs good but nothing special. same trans and gears on 35s half wore out.
Stock size tires will pull even better.
I could pull a 6000lb boat trailer at highway speeds easily. Idk how pulling a grade would be. It certainly would slow it down a bit. For frame of reference.
With my tires 70mph is 2900rpms.
 

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
7,077
Reaction score
12,446
Location
Auburn, Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
Ya 70 with a big trailer is a lot to ask out of an old truck. Also a 5mpg adventure, lol.
As cool as they are, if I’m going to be ripping the hitches off of 5th wheel campers and hay wagons, I’d want any number of newer trucks that are bigger, heavier, more capable, more comfortable and more power. Occasional farm work or pulling to the local campground different story.
 

Jack135

Junior Member
Joined
Feb 9, 2021
Posts
4
Reaction score
0
Location
CAMDENTON
First Name
Tom
Truck Year
1987
Truck Model
2500 4x4 Suburban
Engine Size
350
I will only pull hay about 20 miles and my camper about 40 miles each way. Local stuff
Thanks for explaining the 70mph towing.
Although I'm not going to tow 70mph would it be better to go the 350 fuel injection route.
 

Babs

Full Access Member
Joined
May 10, 2020
Posts
1,951
Reaction score
9,644
Location
Ottawa Valley
First Name
Paul
Truck Year
1976
Truck Model
Chevrolet CUCV
Engine Size
350
:welcome:
 

Bextreme04

Full Access Member
Joined
May 13, 2019
Posts
4,464
Reaction score
5,629
Location
Oregon
First Name
Eric
Truck Year
1980
Truck Model
K25
Engine Size
350-4bbl
I will only pull hay about 20 miles and my camper about 40 miles each way. Local stuff
Thanks for explaining the 70mph towing.
Although I'm not going to tow 70mph would it be better to go the 350 fuel injection route.

An '87 350 should already be TBI, right?

My truck is almost identical engine/trans/rear end ratio.

65mph is about it... it's wound out at that speed. I have a 5th wheel attachment in the bed and have pulled a trailer with it, it basically feels like there's nothing there. The power is low so it hates mountains, but flat land it has no problem at all.

My engine has some mechanical issues and is old and worn out carb'd... I average somewhere in the 6-10mpg range around town and highway. Truck weighs almost exactly 6,000lbs with me in it and full of fuel.
 

Jack135

Junior Member
Joined
Feb 9, 2021
Posts
4
Reaction score
0
Location
CAMDENTON
First Name
Tom
Truck Year
1987
Truck Model
2500 4x4 Suburban
Engine Size
350
Thanks for the info
What is TBI
Also what shocks would you recommend for a smoother ride
 

Slybeanx

Full Access Member
Joined
Sep 29, 2020
Posts
122
Reaction score
101
Location
Maryland
First Name
Chris
Truck Year
1987
Truck Model
R1500
Engine Size
v6
Thanks for the info
What is TBI
Also what shocks would you recommend for a smoother ride

Throttle body injection. You should have 1 or 2 injectors in your throttle body.

I like my KYB shocks on my lowered C10, for a heavier burb it might differ.
 

Bextreme04

Full Access Member
Joined
May 13, 2019
Posts
4,464
Reaction score
5,629
Location
Oregon
First Name
Eric
Truck Year
1980
Truck Model
K25
Engine Size
350-4bbl
Thanks for the info
What is TBI
Also what shocks would you recommend for a smoother ride

Throttle body injection... basically you have the first year of fuel injected motors in a square body chevy.

Shocks will not make a 3/4 ton leaf spring truck ride soft. The softest(and most expensive) springs would be Deaver or ORD custom springs. Tuff Country EZ-ride springs are generally considered the softest budget springs you can get. Good quality shocks will help with bounce, but not softness.
 

Latest posts

Forum statistics

Threads
44,396
Posts
956,497
Members
36,696
Latest member
charliesquarehed
Top