What have you done to your square lately??

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

mattsk8

mattsk8

Full Access Member
Joined
Jun 5, 2024
Posts
172
Reaction score
448
Location
Michigan
First Name
Matt
Truck Year
1986
Truck Model
K20
Engine Size
350
Swore at it a lot. I have a Pro Systems carb that's been phenomenal for like 6 years. I don't have a choke at all but it's always been good after about 5 minutes. Fired it up this morning and it wouldn't idle, almost like a fuel injected car with a bad idle air control valve. Drove it about 20 minutes and it seems fine now, but I'm guessing the carb needs a good cleaning.
 
ChuckN

ChuckN

Full Access Member
Joined
Nov 8, 2022
Posts
1,323
Reaction score
4,043
Location
Bellinham, WA
First Name
Chad
Truck Year
1981
Truck Model
C10
Engine Size
350
Put the second coat of paint on the 73-80 inner fenders. Probably get started on them when the rain officially hits for the fall.
You must be registered for see images attach


That said, I got to looking and is this a cruise control module? It’s haphazardly bolted to the driver side inner fender.
You must be registered for see images attach

Which would be weird since I don’t even have a stalk for it on the column.

I also have this junction block bolted to the inner fender that connects to this bigger red ended wire and goes back to the junction block on the middle of the firewall. I’m guessing that wire could be eliminated too by connecting the small wire directly to the junction block on the firewall.
You must be registered for see images attach

You must be registered for see images attach
 
1lejohn

1lejohn

Full Access Member
Joined
May 14, 2012
Posts
325
Reaction score
749
Location
texas
First Name
john
Truck Year
1985 , 2004
Truck Model
k-1500, 2500 HD
Engine Size
350, 6.7
Yes that
ChuckN said:
Put the second coat of paint on the 73-80 inner fenders. Probably get started on them when the rain officially hits for the fall.
You must be registered for see images attach


That said, I got to looking and is this a cruise control module? It’s haphazardly bolted to the driver side inner fender.
You must be registered for see images attach

Which would be weird since I don’t even have a stalk for it on the column.

I also have this junction block bolted to the inner fender that connects to this bigger red ended wire and goes back to the junction block on the middle of the firewall. I’m guessing that wire could be eliminated too by connecting the small wire directly to the junction block on the firewall.
You must be registered for see images attach

You must be registered for see images attach
Click to expand...
Yes that is the cruise control module. Don't just throw it away they are hard to find. Someone will want it. Don't be like me and get rid of a bunch of hard-to-find stuff. Then years later wish you had it back. :oops: Not sure on the wiring.
 
legopnuematic

legopnuematic

Licensed Junk Dealer
Supporting Member
Joined
Oct 27, 2016
Posts
2,508
Reaction score
6,486
Location
MO
First Name
Spencer
Truck Year
1971, 1̶9̶7̶4, 1976, 1979,1̶9̶8̶5, 2002
Truck Model
Dart Swinger, Sierra 10, C10 Cheyenne, C10 Big Ten, Silverado 10, Ram 2500
Engine Size
225/6, 350 c.i., 350 c.i., 5.9l Cummins
That is an auto reset circuit breaker on the inner fender, not just a junction block.

Best to trace it and determine where it goes and if it is needed, etc.
 
ChuckN

ChuckN

Full Access Member
Joined
Nov 8, 2022
Posts
1,323
Reaction score
4,043
Location
Bellinham, WA
First Name
Chad
Truck Year
1981
Truck Model
C10
Engine Size
350
1lejohn said:
Yes that

Yes that is the cruise control module. Don't just throw it away they are hard to find. Someone will want it. Don't be like me and get rid of a bunch of hard-to-find stuff. Then years later wish you had it back. :oops: Not sure on the wiring.
Click to expand...
I’m assuming in 1981 they had a cruise stalk on the column? It just has me baffled- unless they installed them in all of these trucks and just connected it if the option was ordered?

Or maybe it’s a retrofit that someone started to add but never finished it.
 
H

HotWheelsBurban

Full Access Member
Joined
Mar 31, 2023
Posts
2,407
Reaction score
5,675
Location
Houston, Texas
First Name
Carol
Truck Year
1990
Truck Model
R2500 Suburban
Engine Size
350
ChuckN said:
I’m assuming in 1981 they had a cruise stalk on the column? It just has me baffled- unless they installed them in all of these trucks and just connected it if the option was ordered?

Or maybe it’s a retrofit that someone started to add but never finished it.
Click to expand...
I remember seeing aftermarket cruise control setups that the button housing clipped onto the turn signal stick.....
 
TotalyHucked

TotalyHucked

Full Access Member
Joined
Feb 24, 2020
Posts
3,671
Reaction score
11,863
Location
Auburn, Georgia
First Name
Zach
Truck Year
1985
Truck Model
Sierra 1500
Engine Size
5.3
ChuckN said:
I’m assuming in 1981 they had a cruise stalk on the column? It just has me baffled- unless they installed them in all of these trucks and just connected it if the option was ordered?

Or maybe it’s a retrofit that someone started to add but never finished it.
Click to expand...
That appears to be a factory setup. Do you not have a button on the end of your turn signal stalk? If not, either somebody was trying to retrofit cruise and your truck never had it or the column has been swapped and it did have it originally
 
ChuckN

ChuckN

Full Access Member
Joined
Nov 8, 2022
Posts
1,323
Reaction score
4,043
Location
Bellinham, WA
First Name
Chad
Truck Year
1981
Truck Model
C10
Engine Size
350
TotalyHucked said:
That appears to be a factory setup. Do you not have a button on the end of your turn signal stalk? If not, either somebody was trying to retrofit cruise and your truck never had it or the column has been swapped and it did have it originally
Click to expand...
Nope, nada. Probably an unfinished retrofit job, likely explains why it’s only partially bolted to the inner fender.
 
Radiohead

Radiohead

That guy on the Columbia
Joined
Mar 17, 2022
Posts
2,486
Reaction score
8,112
Location
Low Earth Orbit where it's safer
First Name
Eric
Truck Year
MCMLXXIX
Truck Model
C-20 Silverado Camper Special
Engine Size
454 crazy cubes, or 7.4 luscious litres
You must be registered for see images attach

I knew this column was going to be a booger. Someone broke the column lock because they didn't have the key and were too lazy to disassemble it to remove the lock cylinder.
You must be registered for see images attach


Got down to here and came to the conclusion that this is going to be a big time sink with probably less than desirable results. But it does have the proper turn signal stalk for cruise so I think I will repair the damaged wires and install into a better example I have waiting in the wings.


You must be registered for see images attach
 
Blue Ox

Blue Ox

Turning Diesel Fuel Into Fun
Joined
Mar 27, 2018
Posts
5,221
Reaction score
12,025
Location
LI-NY
First Name
Derek
Truck Year
MCMLXXXV
Truck Model
K20HD
Engine Size
6.2L
Radiohead said:
You must be registered for see images attach

I knew this column was going to be a booger. Someone broke the column lock because they didn't have the key and were too lazy to disassemble it to remove the lock cylinder.
You must be registered for see images attach


Got down to here and came to the conclusion that this is going to be a big time sink with probably less than desirable results. But it does have the proper turn signal stalk for cruise so I think I will repair the damaged wires and install into a better example I have waiting in the wings.


You must be registered for see images attach
Click to expand...

That wasn't under water, was it?
 
You must log in or register to reply here.

Similar threads

Strick
What I have done to my Square lately…
Replies
1
Views
240
Strick
Strick
S
Oops. Probably shouldn't have done that.
Replies
11
Views
2K
dsteelejr
dsteelejr
Randy and Easton
  • Sticky
Easton Is Graduating Thank You all for your help GMSB!!
2 3
Replies
31
Views
4K
Randy and Easton
Randy and Easton
D
Thank you post to y'all.
Replies
3
Views
1K
Catbox
Catbox
RanchWelder
Identifying GM Transfer Cases: Show us in pictures what you have with measurments and Adapters.
2
Replies
19
Views
5K
dragstews
dragstews

Latest posts

Forum statistics

Threads
44,173
Posts
950,868
Members
36,288
Latest member
brentjo
Top