Davidj
Member
- Joined
- Sep 19, 2023
- Posts
- 30
- Reaction score
- 23
- Location
- greensburg
- First Name
- David
- Truck Year
- 1986
- Truck Model
- Silverado/c10
- Engine Size
- 350cfm
Made a thread a couple weeks ago about running dry on atf and losing all drive gears. Community said “yank it for overhaul” well, I’ve got it torn apart and I’m not sure where the issue was. I have a couple pictures to share and ask opinions on. One is of all the clutches. The ones up top seemed burnt looking but I’m not sure if that’s enough to have caused me to lose drive gears completely. Next is the valve body. When disassembling, one of the valves were pretty difficult to get out. Took quite a bit of turning and pulling when all the others slid out easily. I took a picture with the valve sticking out of the slot that was being a pain. Maybe this was the issue? I appreciate any and all input. Simply asking opinions on what could’ve been the culprit for no drive gears.
