- Joined
- Aug 19, 2010
- Posts
- 28,456
- Reaction score
- 9,432
- Location
- Kansas City, Mo
- First Name
- Jacob
- Truck Year
- 1977/1990/1991
- Truck Model
- C10 longbed/R1500 Burb/R3500 Dually
- Engine Size
- 350/350/454
I decided to do this write up because many said that you could not put speakers in doors with power windows. Well, you most definitely can and can make it look good!!
First, here is what I put in...
1. Radio: Pioneer DEH-X9600BHS
2: Component speakers: JL Audio C2-650 (2 sets)
3. Amps: JL Audio 300/4v2 (for the component speakers) and HD750/1 (for the subs)
4. Subs: two JL Audio 10" subs in JL enclosures (don't remember exact model numbers
Previous owner had already hacked the dash so I just went with another head unit that'd fit the spot. When they did that they also broke the trim a little bit which you can see on the right. So at some point I need to replace my dash bezel
Here are the progress pics focusing mostly on the front doors.
Test fit with door shut
-----
Everything in but nothing wrapped so just in the raw wood
Amps sit under second row seat
-----
I didn't see the need to take pics of both doors or both sides in rear cuz they look the same but they are there
-----
Here's the whole setup wrapped and looking pretty decent considering this is only my second time ever doing any kind of interior work
Still need to stick that carpet under the trim piece
----
Driver rear
-----
Passenger rear
Front doors
-----
rear subs (I will recarpet this once I redo the carpet on the floor so this is just temporary)
First, here is what I put in...
1. Radio: Pioneer DEH-X9600BHS
2: Component speakers: JL Audio C2-650 (2 sets)
3. Amps: JL Audio 300/4v2 (for the component speakers) and HD750/1 (for the subs)
4. Subs: two JL Audio 10" subs in JL enclosures (don't remember exact model numbers
Previous owner had already hacked the dash so I just went with another head unit that'd fit the spot. When they did that they also broke the trim a little bit which you can see on the right. So at some point I need to replace my dash bezel
You must be registered for see images attach
You must be registered for see images attach
Here are the progress pics focusing mostly on the front doors.
You must be registered for see images attach
Test fit with door shut
-----
Everything in but nothing wrapped so just in the raw wood
Amps sit under second row seat
-----
I didn't see the need to take pics of both doors or both sides in rear cuz they look the same but they are there
-----
Here's the whole setup wrapped and looking pretty decent considering this is only my second time ever doing any kind of interior work
Still need to stick that carpet under the trim piece
----
Driver rear
-----
Passenger rear
You must be registered for see images attach
Front doors
-----
rear subs (I will recarpet this once I redo the carpet on the floor so this is just temporary)
You must be registered for see images attach
Last edited: