Quad Shocks

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Mango

Full Access Member
Joined
Dec 22, 2021
Posts
218
Reaction score
166
Location
JacksonWyoming
First Name
Gil
Truck Year
1989
Truck Model
1500
Engine Size
350
Hey All
Quad Front shocks for a 1989 4x4 burb V1500, replaced them with some random brand from NAPA about three years ago. Feels like I am driving the Flinstone Car, Stock height, Any suggestions on replacements? Also original leaf springs with 198,000 miles
 

dd1990

Member
Joined
Nov 3, 2023
Posts
36
Reaction score
67
Location
Ventura CA
First Name
David
Truck Year
1990
Truck Model
Suburban 1500
Engine Size
350
Always been a fan of Bilstein 4600 and 5100 shocks
 

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
7,077
Reaction score
12,446
Location
Auburn, Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
Can’t see OE half ton leafs with 200k and 35 years on them being overly stiff.
I’d say too much shock for the application.
Easy enough to disconnect 1 set, or both sets and see how much softer it rides.
Although it may be almost un driveable with no front shocks. I thought the stiff springs on the blue truck may drive “ok” with no shocks. It was like being in a bouncy house. It never stopped moving.
Also verified the front springs aren’t bottoming out at the rear shackle.
Have yet to disconnect the ORD sway bar disconnect that a friend gave my son and we installed.
I don’t drive it much and he don’t care.
 
Last edited:

legopnuematic

Licensed Junk Dealer
Supporting Member
Joined
Oct 27, 2016
Posts
2,602
Reaction score
6,853
Location
MO
First Name
Spencer
Truck Year
1971, 1̶9̶7̶4, 1976, 1979,1̶9̶8̶5, 2002
Truck Model
Dart Swinger, Sierra 10, C10 Cheyenne, C10 Big Ten, Silverado 10, Ram 2500
Engine Size
225/6, 350 c.i., 350 c.i., 5.9l Cummins
Are you sure it’s the shocks and not the spring or spring hanger bottoming out?

Those factory negative arch springs seem to always sit low when they are old, and the spring hangers always seem close to the frame. Bad bushings could contribute too.

If a spring bottoms out, you don’t really have a spring anymore, things get rough fast.
 

Zelph

Full Access Member
Joined
Dec 10, 2022
Posts
121
Reaction score
205
Location
Nevada
First Name
David
Truck Year
1989
Truck Model
K5
Engine Size
350 TBI
Remove the auxiliary shocks. No need for them.
 

calredneck

Full Access Member
Joined
Jan 2, 2018
Posts
55
Reaction score
24
Location
Cailf.
First Name
Kerch
Truck Year
1984
Truck Model
K20
Engine Size
350
My 84 K20 came with duel front shocks four wheel sold me the lift I wanted to keep the duel shocks they sold me duel shocks it rode ruff I took off the rear shocks and it rides better the problem is there full rate shocks they should be half rate shocks hard to find them and they are expensive
 

SquareRoot

Full Access Member
Joined
Mar 18, 2017
Posts
4,229
Reaction score
8,121
Location
Arizona
First Name
Mike
Truck Year
85
Truck Model
K20
Engine Size
350
My 84 K20 came with duel front shocks four wheel sold me the lift I wanted to keep the duel shocks they sold me duel shocks it rode ruff I took off the rear shocks and it rides better the problem is there full rate shocks they should be half rate shocks hard to find them and they are expensive
al
 

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
7,077
Reaction score
12,446
Location
Auburn, Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
My 84 K20 came with duel front shocks four wheel sold me the lift I wanted to keep the duel shocks they sold me duel shocks it rode ruff I took off the rear shocks and it rides better the problem is there full rate shocks they should be half rate shocks hard to find them and they are expensive
Maybe expound on that. I don’t see removing the rear shocks doing much either way for ride in a 3/4 ton (with no weight in the back).
Not sure I can even tell the difference between blown shocks, no shocks and new shocks on the back of the K20. The difference is subtle.
Now the front is a whole different story.
 

vr1967

Full Access Member
Joined
Apr 16, 2023
Posts
248
Reaction score
867
Location
Mississippi
First Name
Virgil
Truck Year
1984
Truck Model
k1500
Engine Size
6.2L turbo
When GM put quad shocks on the trucks, they cut the valving/stiffness of the shocks in half. I have not found a set of aftermarket shocks valved this way.

Idea was, as I was told by an old GM parts man, there was twice the oil to heat up when offroading
 

89GMCJimmy

Full Access Member
Joined
Mar 5, 2019
Posts
101
Reaction score
61
Location
90245
First Name
ivan
Truck Year
1989
Truck Model
Jimmy
Engine Size
350
Bilstien I prefer the Aux position more vertical more travel 360/80 valving.
Stock position is less travel and lighter 255/70 valved shocks.
I went with 33-230344 10.00 travel 25.9 ext 15.9 collap 360/80 valving in the Aux position on my 89'
Handled better on the highways getting to and from hunting spots and Off Highway hard pack dirt roads. The 255/70 valving was too soft and felt boaty or warbly if that makes sense.
 
Last edited:

WFO

Full Access Member
Joined
Jan 6, 2017
Posts
3,713
Reaction score
5,101
Location
Texas Panhandle
First Name
Dan
Truck Year
1986
Truck Model
K20
Engine Size
350
Maybe expound on that. I don’t see removing the rear shocks doing much either way for ride in a 3/4 ton (with no weight in the back).
Not sure I can even tell the difference between blown shocks, no shocks and new shocks on the back of the K20. The difference is subtle.
Now the front is a whole different story.
I'm thinkin he meant the rear 2 of the front 4 shocks.
 

Mango

Full Access Member
Joined
Dec 22, 2021
Posts
218
Reaction score
166
Location
JacksonWyoming
First Name
Gil
Truck Year
1989
Truck Model
1500
Engine Size
350
Leaf Springs not bottoming out, the bushings have been replaces last summer, Still looking for the OEM or similar shocks
Thanks for all the replies
 

Latest posts

Forum statistics

Threads
44,396
Posts
956,495
Members
36,696
Latest member
charliesquarehed
Top