New clapped out ‘87 350

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,600
Reaction score
9,116
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
I have a budget of around $500 or so. I may have to get some heads second-hand or get the chinese knock offs from eBay.
Noooooooo!!!!!! I'm sorry to tell you this 500.00 might! get your crank turned,rod big ends,checked,a 929 cam clone,rings,brgs,solvent check the heads,a junkyard electric fan,and someone's used q jet with manifold.It wouldn't be a bad build to cut your teeth with but it sure isn't ideal.
 
Last edited:

Jonathonmb357

Full Access Member
Joined
Jan 13, 2022
Posts
91
Reaction score
77
Location
Fort Worth, Texas
First Name
Jonathon
Truck Year
1979
Truck Model
C30
Engine Size
292 cubic inch inline-six
Noooooooo!!!!!! I'm sorry to tell you this 500.00 might! get your crank turned,rod big ends,checked,a 929 cam clone,rings,brgs,solvent check the heads,a junkyard electric fan,and someone's used q jet with manifold.It wouldn't be a bad build to cut your teeth with but it sure isn't ideal.
Haha, I get you. I’m not looking for anything to knock anyone’s socks off. I just want a four barrel V8, dual exhaust and plenty of chrome. Some power would be a bonus!
 

RanchWelder

Full Access Member
Joined
Jan 14, 2023
Posts
802
Reaction score
1,152
Location
Earth
First Name
--------
Truck Year
87
Truck Model
Blazer
Engine Size
355ci
Save your money for six months, and speak with a machinist...
My aftermarket Vortec heads, direct from my machinist, were $970.00 with stainless valves.
He worked every port by hand on $65,000.00 worth of high end machinery...
The cores have gone up significantly in price since then... add $200.00 easy...


^^^You see Ricko1966 freaking out^^^^


ALMOST ANY HEADS YOU BUY: will still probably need $400-$500 in machine work!
 

Jonathonmb357

Full Access Member
Joined
Jan 13, 2022
Posts
91
Reaction score
77
Location
Fort Worth, Texas
First Name
Jonathon
Truck Year
1979
Truck Model
C30
Engine Size
292 cubic inch inline-six
Save your money for six months, and speak with a machinist...
My aftermarket Vortec heads, direct from my machinist, were $970.00 with stainless valves.
He worked every port by hand on $65,000.00 worth of high end machinery...
The cores have gone up significantly in price since then... add $200.00 easy...


^^^You see Ricko1966 freaking out^^^^


ALMOST ANY HEADS YOU BUY: will still probably need $400-$500 in machine work!
I get you, thanks. I’m not kidding when I say bare bones budget!
Hopefully the block won’t need $500 worth of machine work.
 

CountKrunk

Full Access Member
Joined
Aug 3, 2023
Posts
448
Reaction score
1,051
Location
SW VA
First Name
Count
Truck Year
1984
Truck Model
C20 Custom Deluxe 3+3
Engine Size
v8 350
I totally get budget, I'm very budget minded as well. But, buy once cry once.

If in 6-18 months you think youre going to go, man i wish i did x. Best to extend the timeline and save up the $$
 

CalSgt

Full Access Member
Joined
Oct 3, 2021
Posts
1,735
Reaction score
3,908
Location
CA
First Name
Casey
Truck Year
1980
Truck Model
Chevy K-10 Custom Deluxe
Engine Size
350
I priced out machine work last year, for boring, line hone, deck, and balanced crank was about $1100 without parts…

I ended up buying someone else’s Vortec SBC project that was unassembled for $700, came with machined block, pistons, rods, crank, and bearings. $700 was without heads and took a lot of shopping on Craigslist to find for that price.

You might be better off having the crank turned and reassembling with fresh bearings. Then hope it lasts until your budget is a little better

Good luck Sir
 

GXPWeasel

Full Access Member
Joined
Nov 5, 2019
Posts
593
Reaction score
1,113
Location
Kansas
First Name
Greg
Truck Year
1982 | 2015
Truck Model
Sierra C15 | Silverado Z71
Engine Size
5.0 | 5.3
I think for $500, you're going to get away with a stock rebuild and some recommended machine work, that's it. I spent almost $2k on a "budget" 305 for my truck. Not high hp numbers. Just a mild cam, flat top pistons, a slight (.008) head decking job, and quality head work with a valve job. That did include parts, except I already had my dual plane aluminum intake, and a carb I built myself. As you can see, It doesn't take long to spend well over $500 when you're talking about an engine build.
 

Jeff w Ashworth

Junior Member
Joined
Jun 2, 2021
Posts
22
Reaction score
1
Location
United States
First Name
Jeff
Truck Year
1984
Truck Model
GMC
Engine Size
350
You could also get a set of vortex heads, port and polish them, an aluminum intake and carb., would do a good job.
 

Latest posts

Forum statistics

Threads
44,415
Posts
957,104
Members
36,750
Latest member
jdishman2355
Top