My 454 build

[HotRodPC]

Ok, so this one is stroked and bored over already.

 

[rumblebox]

Ok, so this one is stroked and bored over already.

It's supposed to be, but I'm still going to pull one of the heads before I commit to it

Sent from my LG-H910 using Tapatalk

 

[rumblebox]

Picking up the new motor this weekend.

You must be registered for see images attach

Sent from my LG-H910 using Tapatalk

 

[HotRodPC]

 

[OkieFishMan]

Any updates?

 

[Honky Kong jr]

What Okie said....

 

[74 Shortbed]

X3...

 

[rumblebox]

Any updates?

Found a '73 truck engine with a factory forged crank and 049 heads. It was burned up after snapping the oil pump shaft, but the block made .060, and the crank made .010. The heads cleaned up well. Saving money for the pistons, cam, and rebuild kit.

You must be registered for see images attach

Sent from my LG-H910 using Tapatalk

 

[Honky Kong jr]

Found a '73 truck engine with a factory forged crank and 049 heads. It was burned up after snapping the oil pump shaft, but the block made .060, and the crank made .010. The heads cleaned up well. Saving money for the pistons, cam, and rebuild kit.

You must be registered for see images attach

Sent from my LG-H910 using Tapatalk

See that wasn’t that hard now was it lol

 

[74 Shortbed]

Found a '73 truck engine with a factory forged crank and 049 heads. It was burned up after snapping the oil pump shaft, but the block made .060, and the crank made .010. The heads cleaned up well. Saving money for the pistons, cam, and rebuild kit.

You must be registered for see images attach

Sent from my LG-H910 using Tapatalk

Congrats nice find..

 

[HotRodPC]

Found a '73 truck engine with a factory forged crank and 049 heads. It was burned up after snapping the oil pump shaft, but the block made .060, and the crank made .010. The heads cleaned up well. Saving money for the pistons, cam, and rebuild kit.

You must be registered for see images attach

Sent from my LG-H910 using Tapatalk

Sweet !!! Thanks for the update. If it's really a forged crank, you plan on putting some hp/torque to it? The 049 heads are Pissnut Port aka Peanut Port heads aren't they? Need to find you some older 396 heads or even some early 427 or Fo Fitty Fo heads.

 

[rumblebox]

Sweet !!! Thanks for the update. If it's really a forged crank, you plan on putting some hp/torque to it? The 049 heads are Pissnut Port aka Peanut Port heads aren't they? Need to find you some older 396 heads or even some early 427 or Fo Fitty Fo heads.

049's are big ovals

Sent from my LG-H910 using Tapatalk

 

[74 Shortbed]

The 049 heads are Pissnut Port aka Peanut Port heads aren't they?

Nope, those are the "good" large oval port heads same as 781's, only difference is chamber size, 049's has 122cc, 781's has 118cc..

 

[HotRodPC]

Nice !!! This bish oughta run real good then with a little compression and a mild cam.

 

[Honky Kong jr]

More chamber means more dome........