Missing sway bar bolts. Anyone know what size they are?

[Edelbrock]

So I'm missing the bolts that connect the sway bar ends to the top of the leaf spring. Anyone know what size they are? What bolts would I order?

 

[1976dully]

They don't mount to the frame with end links?

 

[nvrenuf]

They don't mount to the frame with end links?

No, on a 4wd the ends of the sway bar have eyelets for a large bolt that goes into the leaf spring u-bolt plates.

 

[Bextreme04]

So I'm missing the bolts that connect the sway bar ends to the top of the leaf spring. Anyone know what size they are? What bolts would I order?

Stock setup: https://www.lmctruck.com/suspension...eH_KVA7z3McJ3CTTGeylq3mfy4CyM5C0n4rgrWz4TQt8-

If you have at least a 2" lift, I highly recommend the ORD disconnect kit. It really unbinds the front swaybar and makes the ride 100% better.
https://www.offroaddesign.com/swayb...kfrCe04_lJfITiD8lvGwAgGVbVAyOIxJ2t4s4wVN1eZvK

 

[Edelbrock]

Stock setup: https://www.lmctruck.com/suspension...eH_KVA7z3McJ3CTTGeylq3mfy4CyM5C0n4rgrWz4TQt8-

If you have at least a 2" lift, I highly recommend the ORD disconnect kit. It really unbinds the front swaybar and makes the ride 100% better.
https://www.offroaddesign.com/swayb...kfrCe04_lJfITiD8lvGwAgGVbVAyOIxJ2t4s4wVN1eZvK

Thanks for the info.

 

[Johnny Atomic]

This is the set of bolts I used to add a sway bar to my 2wd. Much cheaper than buying individually.

https://www.lmctruck.com/suspension/tools-suspension/frame-hardware-kit-4

 

[89GMCJimmy]

Thanks for the info.

Swaybar is a huge 3/4" bolt with a 1 1/8" head for factory set up.

Bextreme04​

I would also highly recommend the ORD Kit if you have any lift between 1 1/2-4"​

 

[Edelbrock]

Swaybar is a huge 3/4" bolt with a 1 1/8" head for factory set up.

Bextreme04​

I would also highly recommend the ORD Kit if you have any lift between 1 1/2-4"​

Tread specs? Standard I assume? Count?

 

[ButchM]

So I'm missing the bolts that connect the sway bar ends to the top of the leaf spring. Anyone know what size they are? What bolts would I order?

Grumba, you asking for the 77 K5 Blazer?

 

[Edelbrock]

Grumba, you asking for the 77 K5 Blazer?

Yep.

 

[ButchM]

So I'm missing the bolts that connect the sway bar ends to the top of the leaf spring. Anyone know what size they are? What bolts would I order?

Grumba
Just did some digging (see below, part no 29), all the 4WD use the same bolt. Its 3/4-10 x 3 1/4". The OEM part number is 328130.
Sourcing aftermarket you should ensure the bolt is grade 8 case hardened. That length may be hard to find but a 3 1/2" could easily be shortened.
Good Luck
Butch

You must be registered for see images attach

You must be registered for see images attach

 

[Edelbrock]

Grumba
Just did some digging (see below, part no 29), all the 4WD use the same bolt. Its 3/4-10 x 3 1/4". The OEM part number is 328130.

Very cool. Thanks man. Much appreciated.

 

[ButchM]

No Prob
Hope it helps.