Gov loc differential???

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Matt69olds

Full Access Member
Joined
Jan 8, 2018
Posts
2,451
Reaction score
3,819
Location
Central Indiana
First Name
Matt
Truck Year
81
Truck Model
GMC 1/2 ton
Engine Size
455 Olds
Did some routine maintenance on my sons 92 Yukon, noticed the rear tires turn opposite from each other when rotated by hand. Classic example of a open rearend. However, the RPO code shows G80 which is locking differential. If I remember correctly, these trucks have the dreaded Gov-bomb diffs. Has this one already exploded? Or does it take a certain amount of slip for the diff to lock?

Is there a better junkyard diff that will bolt into this rearend? This is a half ton Yukon, I assume it’s the common 8.5 rear that other half ton trucks use.

My son has big dreams for this truck, just as we all did with our first car/truck. I’m trying to drill into his head the lowbuck but do it right mentality. In other words, build the truck the right way, but as cheaply as possible.
 

yevgenievich

Full Access Member
Joined
Mar 1, 2014
Posts
4,819
Reaction score
3,400
Location
Place
First Name
Name
Truck Year
Year
Truck Model
Model
Engine Size
Size
It locks when the speed difference is reached. Gov lock always worked fine for my use, but smallest diff I had with a government lock was 9.5". Gov lock does not like high speed wheel spin with sudden traction catches.
9.5" diff from a light duty 2500 truck would swap in.( keeps it 6 lug)
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,439
Reaction score
28,345
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
I agree with swapping in a 6-lug 14 bolt axle if durability is concerned. However, the Gov-Loc in the 9.5" diff is also rather fragile, much like the 8.5" diff. Just not AS fragile.

But, the stock unit may not be busted yet. It would be good to pull the cover for a look-see.
 

wlwarnke

Full Access Member
Joined
Sep 14, 2021
Posts
132
Reaction score
183
Location
Helotes, TX
First Name
William
Truck Year
1983
Truck Model
K5
Engine Size
5.7
G80 functions like an open diff until 100rpm delta between axles. Then locks. Supposed to unlock at approx 20 mph.

They are not high speed burnout devices because of the 20 mph limit. This is how people destroy them. They are for low speed use.

They can be modified to defeat to 20 mph limit however.
 

Catbox

Full Access Member
Joined
Jul 12, 2018
Posts
4,452
Reaction score
16,676
Location
Just Outside of Portland Oregon
First Name
Peter
Truck Year
1979
Truck Model
C20 Silverado Camper Special
Engine Size
461
Gov-Bomb.
This is what my first one did to itself.
The suburban is my wife's grocery getter, no offroad pretty much at all with it since we have had it.
We were on the way to a hockey game and making a left turn when the whole rear end jumped and made a wicked popping sound. I put it into 4wd and limped into the parking lot.
You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach


The rearend is not something I would cheap out on.
I tried that with a second hand carrier from the junkyard to replace this one.
We were not financially positioned to do a full boogie rebuild back then.

It lasted about 2 years before I was into the rearend again.
That is when I put in a whole new set up with a Detriot True trac.
 

shiftpro

Full Access Member
Joined
Aug 31, 2012
Posts
4,855
Reaction score
6,092
Location
BC Canada
First Name
shiftpro
Truck Year
73-87
Truck Model
1500, 2500, 3500
Engine Size
350, 383, 454, 496!
My AWD Astro van had one. It worked good for getting out of my snowed in back alley, turning out of my carport and going up a slight hill. I could hear and feel it kicking in. How many times can that thing go 'thump' before it changes it tone to 'snap'?
 

dvdswan

Full Access Member
Joined
Mar 11, 2014
Posts
2,366
Reaction score
2,035
Location
Port Orchard, WA
First Name
Dave
Truck Year
1978
Truck Model
K10
Engine Size
350
Gov-Bomb.
This is what my first one did to itself.
The suburban is my wife's grocery getter, no offroad pretty much at all with it since we have had it.
We were on the way to a hockey game and making a left turn when the whole rear end jumped and made a wicked popping sound. I put it into 4wd and limped into the parking lot.
You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach


The rearend is not something I would cheap out on.
I tried that with a second hand carrier from the junkyard to replace this one.
We were not financially positioned to do a full boogie rebuild back then.

It lasted about 2 years before I was into the rearend again.
That is when I put in a whole new set up with a Detriot True trac.
This is why potty training is important... Nobody needs to see that. LOL
 

SquareRoot

Full Access Member
Joined
Mar 18, 2017
Posts
4,192
Reaction score
8,030
Location
Arizona
First Name
Mike
Truck Year
85
Truck Model
K20
Engine Size
350
A similar conversation came up on another site. I noted that my 21 Canyon Duramax AT4 comes with the G80 "locking differential". It was odd to think GM would still be using the design if it was such a POS over all these years. I'm "told" that the G80 is just the RPO code and has never changed. However, what was called the Gov Bomb is a far different design than the G80 in modern trucks. I don't know if that's accurate but that's what they say. Maybe @Keith Seymore would have some insight?
 

Bextreme04

Full Access Member
Joined
May 13, 2019
Posts
4,439
Reaction score
5,581
Location
Oregon
First Name
Eric
Truck Year
1980
Truck Model
K25
Engine Size
350-4bbl
A similar conversation came up on another site. I noted that my 21 Canyon Duramax AT4 comes with the G80 "locking differential". It was odd to think GM would still be using the design if it was such a POS over all these years. I'm "told" that the G80 is just the RPO code and has never changed. However, what was called the Gov Bomb is a far different design than the G80 in modern trucks. I don't know if that's accurate but that's what they say. Maybe @Keith Seymore would have some insight?
G80 is the RPO for "locking diff" but they are all very similar. As far as I know they are all designed by Eaton and share much of the same design. The one in my 2011 Suburban 8.6" looks identical to the one @Vbb199 had in his 10 bolt suburban rear end. It's going on 208,000 miles and has never given me any noise or issues. Snow, rain, ice, mud, towing, etc.... I just inspected the Eaton unit, cleaned it all up, new bearings and 4.10 gears and it's back on the road.

Its probably the same one @Catbox had in his also. The CUCV's all got Detroit lockers in their 14BFF.
 

Catbox

Full Access Member
Joined
Jul 12, 2018
Posts
4,452
Reaction score
16,676
Location
Just Outside of Portland Oregon
First Name
Peter
Truck Year
1979
Truck Model
C20 Silverado Camper Special
Engine Size
461
Epic carnage pics Cat.
Yup.
I blew the junkyard Gov-Bomb unit in a similar fashion.
At that time I had just gotten a bonus check from work and we had it towed to the local guru.
I had the whole thing rebuilt at the time with a Detroit True Trac, ring & pinion, and an axle.

Make sure you keep an eye on the axle bearing wear surfaces as well.
Once you have worn through the hardened part, they need to be replaced before failure.

The True Trac lasted us for 5 years.
I believe we had a bent axle tube from a tire coming off at about 30 mph that put some stress on the parts inside the diff that caused its failure. It took a couple of years, but I felt the same popping feeling from the rear of the sub.

Off to the shop again, this time my old guy retired so I found a new one through a racers page on facebook.

Now we are a Yukon Dura Grip kinda family.
It seems to work like a champ.
That one has been in there for almost a year now and has been trouble free.
 
Last edited:

77 K20

Full Access Member
Joined
Nov 9, 2012
Posts
3,101
Reaction score
3,119
Location
Montana
First Name
Mike
Truck Year
1977
Truck Model
K20 5" lift
Engine Size
HT383 fuel injected
I had a 1998 ZR2 that had the G80 from the factory in the rear axle. At times it would engage rather rough but never had issues with it offroading. It was only on 31" tires. I was on a ZR2 forum back then and failures were not that common unless someone was doing something very stupid.
I had a 2003 Silverado with the 6 speed manual and the 8.1L engine. It never clunked/slammed like the ZR2 one did and yet it would still lock the tires together. I had 285/75R16 tires on it and had lit them up on more than one occasion.
Just seems to be how lucky you are I guess.
 

Rusty Nail

Full Access Member
Joined
Jan 29, 2015
Posts
10,041
Reaction score
10,133
Location
the other side of the internet
First Name
Rusty
Truck Year
1977
Truck Model
C20
Engine Size
350sbc
They require maintenance... I always use a bottle of positrac additive. IDGAF what the GL5 label claims. Cones with it you say? Yeah. As soon as I put it in there it'll have some.

I could add some bull stuff story about the 8.5" in my SS but why bother? Chirps third at 85 and never complained.

This dude blew his schitt up in a parking lot. :smh:

Change the fluid ffs. That interval is 30k. Add the little bottle.
Go head and take the cover off and hose down the guts with brakeleen.

Undeserved bad rap.
 

gmbellew

Full Access Member
Joined
May 27, 2018
Posts
1,214
Reaction score
1,283
Location
Kansas city
First Name
glen
Truck Year
1990
Truck Model
suburban 1500
Engine Size
350
I rock them until they go. I have an 04 burb with 250k on it and still works great. the 90 burb blew it out at 200k and I replaced it with a truetrac. I am not rough on them. if you are rough on them, they don't seem to last very long....
 

Rusty Nail

Full Access Member
Joined
Jan 29, 2015
Posts
10,041
Reaction score
10,133
Location
the other side of the internet
First Name
Rusty
Truck Year
1977
Truck Model
C20
Engine Size
350sbc
My AWD Astro van had one. It worked good for getting out of my snowed in back alley, turning out of my carport and going up a slight hill. I could hear and feel it kicking in. How many times can that thing go 'thump' before it changes it tone to 'snap'?
I wish I had an AWD Badasstro van.
You could get one with a 4.3L OR a freaking IRON DUKE!
/pwncity

I'd jack it up and run big ash ATs on it so fast it would make your head spin.

You must be registered for see images attach
 

Forum statistics

Threads
44,162
Posts
950,642
Members
36,276
Latest member
2manysquares2care
Top