GMC-IH

[dragstews]

Just like working the center and a bunch of sanding ...

You must be registered for see images attach

I'm thinking of drilling a hole for a choke cable ... The SBC motor has a choke stove on the intake that been working well for years ...
Going to need to get a carb for the BBC motor, it may have a manual choke, don't have a clue what to use, but just in case, the cable hole will be there ...

 

[dragstews]

I like my valve covers like I like my boobies...big

Got boobs !!

You must be registered for see images attach

You must be registered for see images attach

... Dagmar's ...

The term evokes the prominent bosom of Dagmar, a buxom early-1950s television personality featuring low-cut gowns and conical bra cups. She was amused by the tribute. (She predates Madonna)

You must be registered for see images attach

Dang .... Put an eye out with those critters !!

 

[dragstews]

Found a carb that would fit the motor build real well ..

You must be registered for see images attach

It's a Holley BR-67319 750 CFM Brawler Street Vacuum Secondary ..
Kind of up there in price, brand new from Bowling Green Ky.

I'm going to see if I can run up on a used one, that might be hard to do cause these hadn't been on the market all that long ..

I might outta wait on drilling a hole in the firewall for a choke cable ..
This puppy comes with a electric choke ..

You must be registered for see images attach

Called Holley and asked if it was available with a manual choke .. ?
Nope only made with the electric ..

 

[dragstews]

Alright, found a 4 bolt main block locally ...
Got a different build in mind .... 496 cubes just may go down ..

xc_hide_links_from_guests_guests_error_hide_media

 

[dragstews]

You must be registered for see images attach

The used GM valve covers powder coated pretty nice ..

You must be registered for see images attach

 

[DoubleDingo]

I like my valve covers like I like my boobies...big

 

[dragstews]

Trying my best to low-ball this motor built ..
Doing pretty good doing so ..

Here's how that's going ..
I had a set of front bumper guards off of a 57 Chevy pickup on my truck for years, being I went to the "Dagmar" guards didn't have a need for them any more .. Just sold them for the same dollar that the new intake cost .... Cool Beans .... That deal was a wash !

Next deal was a carb .... Found a Holley 3310 750 CFM, vacuum secondary, electric choke, square bore on the cheap ...
Fairly close by ...

You must be registered for see images attach

Used but not used up !

Next was a set of long tube Headman headers ...
They are hi-dollar new ...
Got a bit of work to do on em cause the collectors being sawed on ..
I should be able to repair them with a little work ..
(We'll see how that goes)

 

[dragstews]

You must be registered for see images attach

Meanwhile ....

You must be registered for see images attach

Decided to get it running as is ...
With only 71,000 miles on the clock there should be a lot more miles to see before a rebuild will be needed ...