Engine oil lines.

[BryanS]

I think you're overcomplicating this. Flare the existing metal lines and run fresh metal lines or AN call it a day.

I wouldn't remove a cooler, nice to have such a thing.

That’s where I’m at. Plus it give me an excuse to buy pretty stainless hoses

 

[Ricko1966]

As for your flexplate cover,a 4x4 cover is cast and has bosses for braces to attach to. Your missing the braces also. At this point a 2wd cover is better than nothing,until you find braces and a 4wd cover. I actually ran with no cover in the past,I ran over a basketball I didn't see and wound it up in the flex plate,yes,something is better than nothing

 

[BryanS]

As for your flexplate cover,a 4x4 cover is cast and has bosses for braces to attach to. You’re missing the braces also. At this point a 2wd cover is better than nothing,until you find braces and a 4wd cover. I actually ran with no cover in the past,I ran over a basketball I didn't see and wound it up in the flex plate,yes,something is better than nothing

Describe said braces they go on the outside of the cover and attach to what?

 

[BryanS]

Describe said braces they go on the outside of the cover and attach to what?

This them? https://www.ebay.com/itm/197038280045

 

[chris3353]

I run rubber the entire length,, Used automotive flare fittings at the cooler and filter.. Installed Gates hose rated for oil and pressure.. been that was for 200K miles