Honky Kong jr
Super Sarcastic Man
- Joined
- Jun 14, 2016
- Posts
- 14,968
- Reaction score
- 9,833
- Location
- Denver,PA
- First Name
- J-me
- Truck Year
- 87
- Truck Model
- V10
- Engine Size
- Lil BB 407
Roller for the win!!!!!
Cam decision
- Thread starter noah_t
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Ronno6
Full Access Member
- Joined
- May 14, 2018
- Posts
- 438
- Reaction score
- 126
- Location
- South Mississippi
- First Name
- Ron
- Truck Year
- 1984
- Truck Model
- C10
- Engine Size
- 355
You might consider giving Willhoite's Cams in OK city a call...he fixed my up with a LT4 Hot Cam regrind for about 1/2 the price of new, every bit as good and can grind one to your specs.He may even be good with recommendations, not sure. But, wouldn't hurt to give 'em a call.......
noah_t
Junior Member
- Joined
- Oct 22, 2018
- Posts
- 17
- Reaction score
- 4
- Location
- Kansas
- First Name
- Noah
- Truck Year
- 1986
- Truck Model
- K20
- Engine Size
- 350
So I found out which cam I have in the truck right now, it’s a pretty cheap summit racing classic cam, it’s a hydraulic flat tappet 288/298, lift is .444/.466 and the rpm range is 1600-5200, lobe separation is 112. I’m just wondering how much more performance I could get if I decided to switch to a different cam, thanks
kenn
Full Access Member
- Joined
- Jan 17, 2019
- Posts
- 141
- Reaction score
- 46
- Location
- detroit
- First Name
- ken
- Truck Year
- 1977, 1978
- Truck Model
- c10, k10
- Engine Size
- 350
thumpr cams have the great idle your looking for "lope" come in different durations and lift to fit needs seems like they get the lope by a tight LSA 108 or 106 compares to a 112 or 114
2500 stall seems to be a basic number on converter remember the rougher the idle, vacuum can be greatly decreased power brakes can be an issue
2500 stall seems to be a basic number on converter remember the rougher the idle, vacuum can be greatly decreased power brakes can be an issue
68post
very, VERY, limited access member
- Joined
- Feb 20, 2014
- Posts
- 281
- Reaction score
- 97
- Location
- Indianapolis
- First Name
- Tim
- Truck Year
- 1984
- Truck Model
- 84 K30 SRW Silverado, 85 C20 C6P
- Engine Size
- 454, TBD
If you call 5 cam companies - you will likely get 5 completely different cams unfortunately.
The World Sportsman II heads, (I have a set of them also), like as much lift as you can provide with all means possible in a streetable cam. This is where a roller would help,( if it's possible for you to utilize a roller), along with a stall & more gear.
I hope you don't have a stock shortblock, do you ?
4.56 is a great all around gear for 35's and a smallblock, my '83 K30 was 4.56/350/33's.
Those heads are similar to Vortecs in some aspects, much better intake flow than exhaust, and need to be cammed the same, except they can use far more lift stock and will still improve flow with lifts past .500"orc .550".
The World Sportsman II heads, (I have a set of them also), like as much lift as you can provide with all means possible in a streetable cam. This is where a roller would help,( if it's possible for you to utilize a roller), along with a stall & more gear.
I hope you don't have a stock shortblock, do you ?
4.56 is a great all around gear for 35's and a smallblock, my '83 K30 was 4.56/350/33's.
Those heads are similar to Vortecs in some aspects, much better intake flow than exhaust, and need to be cammed the same, except they can use far more lift stock and will still improve flow with lifts past .500"orc .550".
Last edited:
Similar threads
