Ac Delco ignition module not compatable wIth duralast distributor?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Hugomartin

Banned
Joined
Jul 23, 2021
Posts
256
Reaction score
71
Location
Nc
First Name
Hugo
Truck Year
1987
Truck Model
V20 3/4 ton 5.7 350 suburban
Engine Size
350
make sure you have the right chart for your engine.

also, I'd be sure to trace all the plug wires to make sure that they are all in the correct spot and order on the cap.
I noticed that today my battery is only 12.1 volts. That was unexpected my battery is maybe 2 years old, I haven’t left any lights on but I call this situation a voodoo
 

gmbellew

Full Access Member
Joined
May 27, 2018
Posts
1,214
Reaction score
1,283
Location
Kansas city
First Name
glen
Truck Year
1990
Truck Model
suburban 1500
Engine Size
350
I noticed that today my battery is only 12.1 volts. That was unexpected my battery is maybe 2 years old, I haven’t left any lights on but I call this situation a voodoo
seems reasonable if the engine isn't running.
 

SirRobyn0

Full Access Member
Joined
Dec 6, 2019
Posts
6,755
Reaction score
11,402
Location
In the woods in Western Washington
First Name
Rob
Truck Year
1984
Truck Model
C20
Engine Size
305
12.1 volts is fine for a non-running engine especially if you have cranked it a few times.

When I was getting into mechanics and older guy at the shop I worked for at the time drummed this into my head for a no start.

An engine needs 3 things to run:
Air
Spark
Fuel

And it needs the right amount of each and at close to the right time.

We can assume it's got air since we are all still breathing.

So that leaves us with fuel and spark. You have already stated it has orange / yellowish spark not blue. That's an issue, is it bad enough to make it not start, maybe, my experience says yes it will prevent it from starting, but I'm also not there watching you perform the test so some variance in what you are doing during the test could change the results.

I'd suggest following a troubleshooting guide is a good idea, but also have this to share. Take the air cleaner totally off the engine. Hook your timing light up to the engine, and have a buddy crank the engine over while you are pointing the timing light into the throttle body just below the injector. If you are getting gas the pulses from timing light make it clear as day and you'll be able to see the fuel spray as plain as day.

Pull a plug out and see if it's wet and smells gas.

If yes you need to do something about that weak spark. If no shoot a little starting fluid in her and crank the engine. If your not getting gas it'll likely fire up briefly and then stall.

Hopefully something there is useful for you.
 

Hugomartin

Banned
Joined
Jul 23, 2021
Posts
256
Reaction score
71
Location
Nc
First Name
Hugo
Truck Year
1987
Truck Model
V20 3/4 ton 5.7 350 suburban
Engine Size
350
So 12.1v on my battery isnt enough juice to start the truck?
 

Hugomartin

Banned
Joined
Jul 23, 2021
Posts
256
Reaction score
71
Location
Nc
First Name
Hugo
Truck Year
1987
Truck Model
V20 3/4 ton 5.7 350 suburban
Engine Size
350
Nobody said that, 12.1 for a reading with the engine off is fine. You need to move forward with troubleshooting to find the issue.
I thought I needed 12.4 at least to start? So my truck should start at 12.1v if all things are correct? Thanks
 

SirRobyn0

Full Access Member
Joined
Dec 6, 2019
Posts
6,755
Reaction score
11,402
Location
In the woods in Western Washington
First Name
Rob
Truck Year
1984
Truck Model
C20
Engine Size
305
I thought I needed 12.4 at least to start? So my truck should start at 12.1v if all things are correct? Thanks
These old trucks are not that sensitive. If there is enough voltage to crank it over, it's likely to be able to fire. It is a 12 volt battery after all so when the alternator is not turning and it's sat for a while it's gonna get down close to 12 volts. your welcome.
 

Hugomartin

Banned
Joined
Jul 23, 2021
Posts
256
Reaction score
71
Location
Nc
First Name
Hugo
Truck Year
1987
Truck Model
V20 3/4 ton 5.7 350 suburban
Engine Size
350
I pulled all the plugs cylinder 6 , 4 looked to be coverd in oil

Cylinder 3 had some build up of carbon. The rest looked good. Do i need a ring job?
 

Hugomartin

Banned
Joined
Jul 23, 2021
Posts
256
Reaction score
71
Location
Nc
First Name
Hugo
Truck Year
1987
Truck Model
V20 3/4 ton 5.7 350 suburban
Engine Size
350
What’s y’all’s take oil fouled?
 

Attachments

  • 015E9590-E2EE-4B9E-A9D8-64A90144EE33.jpeg
    015E9590-E2EE-4B9E-A9D8-64A90144EE33.jpeg
    206.9 KB · Views: 43

Latest posts

Forum statistics

Threads
44,162
Posts
950,638
Members
36,273
Latest member
dannyphx
Top