3500 front disc noise over bumps, is there a kit to fix this???

[charlesg]

Anyone know of a kit?

Thanks!

 

[Craig 85]

When I assembled my brakes I use caliper grease to prevent squeals and chatter. Are the bearings good/tight?

You must be registered for see images attach

 

[bucket]

Are the caliper slide bits in place? There must be something loose to cause the noise.

 

[K201979]

Im guessing the little clips arent in there and the pads are rattling. If thats the case, you can buy the clips.

 

[charlesg]

Im guessing the little clips arent in there and the pads are rattling. If thats the case, you can buy the clips.

clips???

 

[charlesg]

When I assembled my brakes I use caliper grease to prevent squeals and chatter. Are the bearings good/tight?

You must be registered for see images attach

yes, bearings all good

 

[K201979]

clips???

Yeah, little spring clips that hold the pad in the caliper. Mine were missing and rattled like crazy. Id say i found them in ebay. Ill see if i can find a link or picture.

 

[K201979]

Disc brake pad retaining clip

You must be registered for see images attach

 

[K201979]

Not sure if itll be the same part number on your truck, but id say thats what you need.

 

[charlesg]

Thank you, the pads are loose in the caliper and the caliper is loose in the spindle, do they make a thicker spring plate for the bottom?

 

[Craig 85]

Do you have these clips installed on the ends of the pads?

You must be registered for see images attach

You must be registered for see images attach

 

[charlesg]

Do you have these clips installed on the ends of the pads?

You must be registered for see images attach

You must be registered for see images attach

That is the inner pad? I dont have any clips on the pads at all.

 

[K201979]

If the caliper is loose too itll be either the pins(that hold the caliper on)or the bushings and rubber orings in the caliper being worn. Ive bought the pins but not the bushings/orings because ive always replaced the whole caliper, but im sure you can get them.

 

[charlesg]

If the caliper is loose too itll be either the pins(that hold the caliper on)or the bushings and rubber orings in the caliper being worn. Ive bought the pins but not the bushings/orings because ive always replaced the whole caliper, but im sure you can get them.

I found a place that sells over sized slide plates, going to try that and the clips for the pads, thank you for all the info!

 

[K201979]

Np, good luck n let us know how it turns out.