Search results

  1. 87silveradok20

    350 starting without fuel pump relay.

    Alright. Thanks
  2. 87silveradok20

    350 starting without fuel pump relay.

    So you are saying that in the cranking it built enough oil pressure to flip the switch.
  3. 87silveradok20

    350 starting without fuel pump relay.

    So today I was working on trying to figure out why my 1990 r3500 wouldn't start and I decided to switch the fuel pump relay into my 87 k20 to see if it was bad. Well the k20 fired right up. So I decided to try it without the really and I fired right up again. So I unplugged the relay that is...
  4. 87silveradok20

    2 in body lift for 35s?

    I have a two inch and there isnt really a gap at the front bumper. It sits even with the lip under the grille.
  5. 87silveradok20

    2 in body lift for 35s?

    315/75/16 which is like a 34.5. I've never measured to see what they are exactly but that's what the metric conversion is.
  6. 87silveradok20

    ReplacING power window motor

    Have someone push the switch and then have some one put one hand on the outside of the window and one on the inside and squeeze hard and pull it up.
  7. 87silveradok20

    Shock mounts

    I bought rear ones already. But I may still make the fronts since I can't find any.
  8. 87silveradok20

    brakes on c30

    Or you could hit the pick n pull
  9. 87silveradok20

    brakes on c30

    Did you try rock auto.
  10. 87silveradok20

    2 in body lift for 35s?

    The front only gets close when you turn hard
  11. 87silveradok20

    2 in body lift for 35s?

    She has a 4" suspension lift and a 2" body lift
  12. 87silveradok20

    2 in body lift for 35s?

    I have a 6" lift and 35s and I don't think you could clear them with much less. Mine are about even with the fender so they don't stick out. And I have a body lift and don't recommend them because your fuel tanks will hang down below the body.
  13. 87silveradok20

    Need some opinions

    That's kinda how I'm leanin. Especially since there is a nice one for sale close.
  14. 87silveradok20

    Need some opinions

    Not a lot. It would probably pull a 7500 lb skid loader at the most. But I just love the look of 2 door duallys.
  15. 87silveradok20

    Shock mounts

    does anyone know about the front.
  16. 87silveradok20

    Shock mounts

    The shock mounts were removed because the idiot that took the axles off was having too much fun with the torch. And sure that pic would be helpful. I have a 14b sf to look at so idk if it's any different than that.
  17. 87silveradok20

    Shock mounts

    Well idk the ones that are in the Dana 44 that is in the truck now come out straight for like 3 inches then are angled. Does anyone know if these will work
  18. 87silveradok20

    Shock mounts

    I'm gonna put a Dana 60 and a 14bt ff in and when they were taken off the shock mounts were torched off both. So my question is where should I get these at.
  19. 87silveradok20

    Need some opinions

    Alright so I might put dually axles under my k20. My question is if I do should I go with a flat bed or a regular dually bed. There is a dually bed in very good condition near me for 850. Or flat beds are everywhere for all sorts of prices. Also if I do a flatbed should I go a nice steel one...
  20. 87silveradok20

    Help me I.D. this grill

    Yup it's 85-87. That's the one my 87 has from the factory.
  21. 87silveradok20

    Quick adjust gooseneck

    That would work other than before long the k20 will be pulling it about as much as the crew cab and the dodge won't pull it much
  22. 87silveradok20

    Quick adjust gooseneck

    So my problem is I have a 2014 dodge 3500 with a 4 inch lift and 35" tires and a 1990 2wd crew cab square I pull a Gooseneck stock trailer with. Does any one know if there is anything that could make for a faster adjustment as right now I pretty much have to adjust it every time I switch trucks...
  23. 87silveradok20

    Cummins swap

    So i think I will find a 91-93 to swap only because it's my first cummins swap. And then maybe build the engine a little. Then put a better clutch and fix the 5th gear problem.
  24. 87silveradok20

    Cummins swap

    Also how much HP and torque can I put through a nv4500 and a 14bt ff rear end. Without it breaking constantly.
  25. 87silveradok20

    Cummins swap

    How hard is it to put a ppump on a 89-93.?

Latest posts

Forum statistics

Threads
44,416
Posts
957,113
Members
36,752
Latest member
78 squarebody
Top