Search results

  1. donnieray

    Add One-way valve to keep fuel at the carb? '86 Burb 454

    Exactly. I had lifted the bed on both trucks and replaced the pickup/strainer units and the rubber linesat the tank and also where they turn under the passenger side cab. Just never thought the metal lines may be clogged. I figure that any part you replace on a 35 year old truck is a good thing...
  2. donnieray

    Add One-way valve to keep fuel at the carb? '86 Burb 454

    Thanks suburble for starting this thread, and thanks to the helpful forum members for all the advice, I bought an electric pump Saturday and started with the C10 since its my daily driver. First I pumped straight from a can through the filter into the carb. The filter filled up, stayed full and...
  3. donnieray

    Add One-way valve to keep fuel at the carb? '86 Burb 454

    Ive been going through the same issues, although I have a 5-7 psi fuel pressure reading even when the filter appears empty or half full or full. Ive did several things that helped but the less than full filter still happens. This is on two trucks, a 86 C10, fresh 355, new Edelbrock 600 and...
  4. donnieray

    Vapor lock

    Good story, and I have after market breathers on all my trucks pulling engine bay air.
  5. donnieray

    Vapor lock

    The gas cap switch is good advice, although it wasn't my problem. When I was younger a friend of mine put a non vented cap on his Chevelle and the fuel pump collapsed the tank! And I only switched to the plastic filter when I suspected a starvation issue, I needed to see the flow. You may have...
  6. donnieray

    Vapor lock

    I never really thought about the filter melting. Damn. And a metal can will also keep me from seeing the bubbles. Then maybe I wont wear my hood hinges out looking at that filter every day!
  7. donnieray

    Vapor lock

    Good advice about the glass filter and rerouting, I use the clear plastic filters by the way and have them mounted pretty close to the carbs.
  8. donnieray

    Vapor lock

    Ive battled this problem for a while now. Bubbles in the filter, mostly empty filter, Edelbrock starving for fuel at random times. Things I did to my 86C and my 84K are new fuel pick up/sender units, thinking that the sock was clogged. It wasn't. Changed out rubber lines at tank, under cab and...
  9. donnieray

    Started this yesterday

    Welcome, you will love it here.
  10. donnieray

    Brought the old paint back pretty good!

    I love a rescue that turns out well. Great job and congrats!
  11. donnieray

    Best Way to Get Rid of Rattly Early Fuel Evaporation (EFE) Valve

    I took the flap out of one and welded up the holes and put it back since the p.o. had a new exhaust system ran and I didn't want to pay to fill the void. I know its cast but it took the weld and has held up for two years now.
  12. donnieray

    Aluminum radiator suggestions

    I got one on ebay, around 200 bucks. Seemed cheap for an aluminium unit but it looks, fits and works very well.
  13. donnieray

    New Guys from NC

    The documentation is cool, and looks like a great starting point for a project. Welcome to the best forum ever.
  14. donnieray

    Antenna wire

    LMC has them and Ive seen them on ebay. About 15 bucks.
  15. donnieray

    Tach options

    Ive installed tachs in both my trucks, after market units feed off a plug that's already on your distributer if you have electronic ignition. Real simple.
  16. donnieray

    Got my new rim/tires for the old girl

    Good progress. Safety and mechanical improvements first, then worry about how she looks.
  17. donnieray

    Square on the Interstate

    Well don't get me wrong, the truck and I both would like another gear but, it is what it is. The C10 became my daily driver when my daughter totaled her car and I gave her my VW JETTA.
  18. donnieray

    New to the forum. 8ft stepside

    Welcome! Id love to find a long step side bed close by.
  19. donnieray

    Square on the Interstate

    Interesting thread here. My 86 C10 sees 250 mile trips on I-95 on a regular basis and short trips daily. 3000 rpm at 75 mph and feels right at home. Carbed 355, TH400 and I believe 343 gears. Rear tires are 275/60 15 and 28" dia. 3000 used to seem kind of high but now seems normal, my 84 K with...
  20. donnieray

    New guy in Florida

    Nice step side. Welcome. You will love it here. And yea, the prices...I see my trucks as an investment!
  21. donnieray

    new guy from North Carolina

    Nice rig and welcome to the forum. Im from NC as well. You will love this site and its helpful and brilliant members.
  22. donnieray

    New guy from Kansas

    Welcome, you will love it here!
  23. donnieray

    New Member( Old Man From North Carolina)

    Welcome, you will love it here. You will find a wealth of knowledge and helpful folk on this forum. Im from NC as well.
  24. donnieray

    Dashpad Anyone?!?!?

    I bought one of these. I'll gladly give a detailed description of mine via pm.
  25. donnieray

    what are the best LED Lights for gauge lights

    Sounds pretty smart to me! I've purchased leds from them for my Sportster that have lasted for years.

Latest posts

Forum statistics

Threads
44,157
Posts
950,592
Members
36,271
Latest member
jstewart7501
Top