Will these work for LED Dash Lights?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

87silveradok20

Full Access Member
Joined
Jun 29, 2014
Posts
684
Reaction score
138
Location
Ohio
First Name
Levi
Truck Year
1987
Truck Model
Silverado k20
Engine Size
350
Those look the same as what I used and they work great


Sent from my iPhone using Tapatalk
 

smoothandlow84

I'd rather be draggin' frame
Joined
Jan 4, 2015
Posts
2,121
Reaction score
790
Location
Arizona
First Name
Steve
Truck Year
1984 Frame...87 motor and 700r trans
Truck Model
1500 r10 pavement scraper
Engine Size
350 TBI
I used led strip lights instead of individual that replace the incandescent. The wiring was much simpler and the gauges are well lit without any dark areas.....just another option.
 

quadracerx

Member
Joined
Aug 6, 2017
Posts
32
Reaction score
2
Location
Graham, WA. USA
First Name
Steve
Truck Year
88
Truck Model
3500
Engine Size
454
One other question....

How many will I need to replace all of them in the guage cluster?

Thanks,

Steve
 

SDJunkMan

Full Access Member
Joined
Nov 17, 2017
Posts
1,809
Reaction score
2,656
Location
Black Hills of South Dakota
First Name
Jeff
Truck Year
1978
Truck Model
K10
Engine Size
350
I think there are 12 in the gauge cluster of my 78, plus one in the wiper switch.
 

Snoots

Full Access Member
Joined
Jan 23, 2013
Posts
8,753
Reaction score
18,205
Location
Georgia
First Name
Roger
Truck Year
1973
Truck Model
Jimmy Sierra
Engine Size
350 w/203
Just remember they won't dim properly unless you add a PCM circuit to the dash light output.
 

quadracerx

Member
Joined
Aug 6, 2017
Posts
32
Reaction score
2
Location
Graham, WA. USA
First Name
Steve
Truck Year
88
Truck Model
3500
Engine Size
454
Ok... So how do I add a PCM circuit... IF I dont does it means they run full bright all the time?

Thanks..

Steve
 

87silveradok20

Full Access Member
Joined
Jun 29, 2014
Posts
684
Reaction score
138
Location
Ohio
First Name
Levi
Truck Year
1987
Truck Model
Silverado k20
Engine Size
350
One other question....

How many will I need to replace all of them in the guage cluster?

Thanks,

Steve
I used like 6 I think for my gauge cluster and the heat controls.


Sent from my iPhone using Tapatalk
 

Snoots

Full Access Member
Joined
Jan 23, 2013
Posts
8,753
Reaction score
18,205
Location
Georgia
First Name
Roger
Truck Year
1973
Truck Model
Jimmy Sierra
Engine Size
350 w/203
Ok... So how do I add a PCM circuit... IF I dont does it means they run full bright all the time?

Thanks..

Steve

Check this out first:
https://www.digikey.com/en/articles...dim-an-led-without-compromising-light-quality
This is good:
xc_hide_links_from_guests_guests_error_hide_media
And this:
https://www.amazon.com/Auto-Meter-9114-Lighting-Dimmer/product-reviews/B000N8GIYG
Or this:
https://www.amazon.com/Dimming-Controller-Adjustable-Brightness-Zitrades/dp/B007V1B0W8

I used the term PCM (Pulsed Code Modulation) incorrectly. I should have use PWM (Pulse Width Modulation).

Use a unit that can handle at least 25% more amp draw than what your LED's are rated. That'll give you a safety margin from overheating and increase the longevity of your unit and LED's.
Just Google 'LED Dimmer for 12V Automotive lights' or similar and you should be able to find something that suits you.
 

Forum statistics

Threads
44,173
Posts
950,868
Members
36,288
Latest member
brentjo
Top