What have you done to your square lately??

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

DoubleDingo

Full Access Member
Joined
Jul 3, 2012
Posts
11,250
Reaction score
17,176
Location
Right where I am
First Name
Bagoomba
Truck Year
1981
Truck Model
81-C20 Silverado Camper Special-TH400-4.10s
Engine Size
Carb'ed Vortec 350
Used some Corroseal on fame parts under the truck. I like this stuff. Instant black. No scraping and sanding. Too old for that crap now days.
You must be registered for see images attach


Also mocked up one of the fenders trying to get some measurements. Think I may just level the back but hard to tell just yet. Want to go kind of old school with some 15" wheels and wider tires.

You must be registered for see images attach
I need to build me some cribbing
 

pinballlarry1

Supporting Member
Supporting Member
Joined
Nov 8, 2023
Posts
114
Reaction score
474
Location
Kalispell, Montana
First Name
Larry
Truck Year
1981
Truck Model
C10
Engine Size
250 6 cylinder
Installed the LMC in-bed spare tire carrier, easy 3 hole drilling and it appears to be secure enough to deter casual thieves.
You must be registered for see images attach

I added my own lock and some longer stainless steel fasteners to suit my situation.

You must be registered for see images attach

You must be registered for see images attach

I like it but will probably rotate the lock bar 180 degrees so the flat side it up to shield the nut and threads from direct rain and snow. Probably only a minor, if any, difference.
You must be registered for see images attach

And I like the look, ease of access, and ability to keep it clean!
You must be registered for see images attach

Next project: auxiliary fuse block, in bed light, fog lights, and headlight relay upgrade. Should be fun.
 

1STLS1

Full Access Member
Joined
Dec 9, 2018
Posts
207
Reaction score
505
Location
West Phoenix AZ
First Name
MIchael
Truck Year
1985
Truck Model
K10
Engine Size
350
You must be registered for see images attach


Installed a new 3", all spring, Tuff Country lift with new shocks along with stainless braid brake hoses, master cylinder, calipers, rotors and pads over the weekend. Cleaned and re packed the wheel bearings. Installed new inner fender to frame rubber shields. The front sway bar isn't connected in the picture due to still fighting installing new bushings in the ends.
I also installed the new front and rear glass, still working on the side and vent windows.
 

legopnuematic

Licensed Junk Dealer
Supporting Member
Joined
Oct 27, 2016
Posts
2,506
Reaction score
6,482
Location
MO
First Name
Spencer
Truck Year
1971, 1̶9̶7̶4, 1976, 1979,1̶9̶8̶5, 2002
Truck Model
Dart Swinger, Sierra 10, C10 Cheyenne, C10 Big Ten, Silverado 10, Ram 2500
Engine Size
225/6, 350 c.i., 350 c.i., 5.9l Cummins
You must be registered for see images attach


Installed a new 3", all spring, Tuff Country lift with new shocks along with stainless braid brake hoses, master cylinder, calipers, rotors and pads over the weekend. Cleaned and re packed the wheel bearings. Installed new inner fender to frame rubber shields. The front sway bar isn't connected in the picture due to still fighting installing new bushings in the ends.
I also installed the new front and rear glass, still working on the side and vent windows.
Looks great on the turbines!
 

ChuckN

Full Access Member
Joined
Nov 8, 2022
Posts
1,314
Reaction score
3,996
Location
Bellinham, WA
First Name
Chad
Truck Year
1981
Truck Model
C10
Engine Size
350
You must be registered for see images attach


Installed a new 3", all spring, Tuff Country lift with new shocks along with stainless braid brake hoses, master cylinder, calipers, rotors and pads over the weekend. Cleaned and re packed the wheel bearings. Installed new inner fender to frame rubber shields. The front sway bar isn't connected in the picture due to still fighting installing new bushings in the ends.
I also installed the new front and rear glass, still working on the side and vent windows.
Love those wheels.
 

ChuckN

Full Access Member
Joined
Nov 8, 2022
Posts
1,314
Reaction score
3,996
Location
Bellinham, WA
First Name
Chad
Truck Year
1981
Truck Model
C10
Engine Size
350
Pretty tired after a family trip, so I decided to do something quick and fun today- put on the new center cap emblems for the rally wheels since the old originals were faded to complete silver. Nice to have little mini projects for when the energy level is low.
You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach
 

JamesSam

Full Access Member
Joined
Feb 15, 2023
Posts
1,602
Reaction score
4,394
Location
VA
First Name
Sam
Truck Year
1987
Truck Model
Silverado V10
Engine Size
5.7 L 350 v8
You must be registered for see images attach


Installed a new 3", all spring, Tuff Country lift with new shocks along with stainless braid brake hoses, master cylinder, calipers, rotors and pads over the weekend. Cleaned and re packed the wheel bearings. Installed new inner fender to frame rubber shields. The front sway bar isn't connected in the picture due to still fighting installing new bushings in the ends.
I also installed the new front and rear glass, still working on the side and vent windows.
Wow! Nice over the weekend job. Getttin it all in, yes!!
 

DoubleDingo

Full Access Member
Joined
Jul 3, 2012
Posts
11,250
Reaction score
17,176
Location
Right where I am
First Name
Bagoomba
Truck Year
1981
Truck Model
81-C20 Silverado Camper Special-TH400-4.10s
Engine Size
Carb'ed Vortec 350
Cut off my tips and tucked up some turndowns to see how it could change the sound. A definite improvement

You must be registered for see images attach
Where's the mandrels...
 

JamesSam

Full Access Member
Joined
Feb 15, 2023
Posts
1,602
Reaction score
4,394
Location
VA
First Name
Sam
Truck Year
1987
Truck Model
Silverado V10
Engine Size
5.7 L 350 v8
Cut off my tips and tucked up some turndowns to see how it could change the sound. A definite improvement

You must be registered for see images attach
Your truck already sounded pretty BA. Anxious to hear the improvement! Post a crank and exhaust clip???:headbang:
 

Forum statistics

Threads
44,162
Posts
950,645
Members
36,276
Latest member
2manysquares2care
Top