What have you done to your square lately??

[DoubleDingo]

Used some Corroseal on fame parts under the truck. I like this stuff. Instant black. No scraping and sanding. Too old for that crap now days.

You must be registered for see images attach

Also mocked up one of the fenders trying to get some measurements. Think I may just level the back but hard to tell just yet. Want to go kind of old school with some 15" wheels and wider tires.

You must be registered for see images attach

I need to build me some cribbing

 

[brooksman9]

Nice for working under vehicles. Especially my Camaro.

 

[DoubleDingo]

Nice for working under vehicles. Especially my Camaro.

And more stable & safe than jack stands

 

[TotalyHucked]

Fresh plugs after seafoaming the top end and a fresh set of front pads

You must be registered for see images attach

 

[pinballlarry1]

Installed the LMC in-bed spare tire carrier, easy 3 hole drilling and it appears to be secure enough to deter casual thieves.

You must be registered for see images attach

I added my own lock and some longer stainless steel fasteners to suit my situation.

You must be registered for see images attach

You must be registered for see images attach

I like it but will probably rotate the lock bar 180 degrees so the flat side it up to shield the nut and threads from direct rain and snow. Probably only a minor, if any, difference.

You must be registered for see images attach

And I like the look, ease of access, and ability to keep it clean!

You must be registered for see images attach

Next project: auxiliary fuse block, in bed light, fog lights, and headlight relay upgrade. Should be fun.

 

[1STLS1]

You must be registered for see images attach

Installed a new 3", all spring, Tuff Country lift with new shocks along with stainless braid brake hoses, master cylinder, calipers, rotors and pads over the weekend. Cleaned and re packed the wheel bearings. Installed new inner fender to frame rubber shields. The front sway bar isn't connected in the picture due to still fighting installing new bushings in the ends.
I also installed the new front and rear glass, still working on the side and vent windows.

 

[Radiohead]

I need to build me some cribbing

Was thinking the exact same thing. <giggle> I just happen to have some material for this.

 

[legopnuematic]

You must be registered for see images attach

Installed a new 3", all spring, Tuff Country lift with new shocks along with stainless braid brake hoses, master cylinder, calipers, rotors and pads over the weekend. Cleaned and re packed the wheel bearings. Installed new inner fender to frame rubber shields. The front sway bar isn't connected in the picture due to still fighting installing new bushings in the ends.
I also installed the new front and rear glass, still working on the side and vent windows.

Looks great on the turbines!

 

[ChuckN]

You must be registered for see images attach

Installed a new 3", all spring, Tuff Country lift with new shocks along with stainless braid brake hoses, master cylinder, calipers, rotors and pads over the weekend. Cleaned and re packed the wheel bearings. Installed new inner fender to frame rubber shields. The front sway bar isn't connected in the picture due to still fighting installing new bushings in the ends.
I also installed the new front and rear glass, still working on the side and vent windows.

Love those wheels.

 

[ChuckN]

Pretty tired after a family trip, so I decided to do something quick and fun today- put on the new center cap emblems for the rally wheels since the old originals were faded to complete silver. Nice to have little mini projects for when the energy level is low.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[TotalyHucked]

Cut off my tips and tucked up some turndowns to see how it could change the sound. A definite improvement

You must be registered for see images attach

 

[JamesSam]

You must be registered for see images attach

Installed a new 3", all spring, Tuff Country lift with new shocks along with stainless braid brake hoses, master cylinder, calipers, rotors and pads over the weekend. Cleaned and re packed the wheel bearings. Installed new inner fender to frame rubber shields. The front sway bar isn't connected in the picture due to still fighting installing new bushings in the ends.
I also installed the new front and rear glass, still working on the side and vent windows.

Wow! Nice over the weekend job. Getttin it all in, yes!!

 

[DoubleDingo]

Cut off my tips and tucked up some turndowns to see how it could change the sound. A definite improvement

You must be registered for see images attach

Where's the mandrels...

 

[JamesSam]

Cut off my tips and tucked up some turndowns to see how it could change the sound. A definite improvement

You must be registered for see images attach

Your truck already sounded pretty BA. Anxious to hear the improvement! Post a crank and exhaust clip???

 

[justhorns]

^^^^^^^^^^Do NOT hold your breath!!!^^^^^^^There will be something else......lol

Alternator whining. 8 days later. You were right.