What have you done to your square lately??

[gmbellew]

For that style, I think @gmbellew is correct.

Not sure on the stacked style.

I am basing that on memory of my 91, thinking the same thing- WTF aren't all 4 on ?

correct, 89-91 style have only either high or low. i have a 1990 suburban, and that is how it is with the factory harness. i think they cheapened the harness and the wiring cannot support all 4 firing at once.

the stacked headlight grille that preceded his style had lows and highs light up for high beam. that was how my old 84 blazer was.

 

[hoagster]

Installed part of the AC mount and worked on installing new power steer hoses and relocating some wiring for the AC before I can't get to it!

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[silverscottsk10]

Started the tear down of the 454, timing chain may be a little worn, so far not much carbon build up at all, nothing in the oil I can see, removed the 40 pound cast intake, not looking forward to moving the heads, together probably weigh as much at me

You must be registered for see images attach

You must be registered for see images attach

Sent from my SM-N950U using Tapatalk

 

[82sbshortbed]

Ok, day 2 of carb swap from ****** eddy to reliable never fail ya Quadrajet. Lol

Day 1 in my build thread. Anyway I went and got some longer bolts and cap screws because they aren't engaging enough threads for me. And the front right was loose and stripped for me.

So I chased the threads with a 5/16-18 tap. As you know aluminum is easy to tap with just a little WD40 to help it along.

You must be registered for see images attach

You must be registered for see images attach

What I traded longer bolts for.

You must be registered for see images attach

Difference between the two

You must be registered for see images attach

Mounted with new hardware. It worked really well. As I was able to tighten the newly tapped holes with the longer screws and bolts.

 

[82sbshortbed]

Then I took my hard fuel rubbing from my 305 and cut it to work on the BBC.

You must be registered for see images attach

You must be registered for see images attach

Then got the MF mounted and fuel line connected. But, it's getting dark so I'm done for tonite.

You must be registered for see images attach

Not too bad for a redneck. Lol

Stay tuned for more this weekend

 

[jjester6000]

Getting O'l Yeller ready for paint.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

I'm doing a 2 tone (maybe woodgrain to match the doors) so I just picked up some chrome trim from the junkyard.
(It should hopefully throw off all the ****** body work)

 

[Dave M]

China virus lock down boredom, reco'd the badge work.

You must be registered for see images attach

 

[Goldie Driver]

Oil change time. PF1218 filter at Deadvanced - $ 8.49.

5 quarts of Castrol 20W50 ( did not see it at Advance) $ 16.97 at Wally World.

They do not have many AC Delco filters, so you gotta bounce around.

5 quarts Supertech 10W40 for top offs

$ 12.96.

Actually seeing some hot young chicks = priceless.

 

[bucket]

Oil change time. PF1218 filter at Deadvanced - $ 8.49.

5 quarts of Castrol 20W50 ( did not see it at Advance) $ 16.97 at Wally World.

They do not have many AC Delco filters, so you gotta bounce around.

5 quarts Supertech 10W40 for top offs

$ 12.96.

Actually seeing some hot young chicks = priceless.

As in baby chicks under the heat lamps?

Lol

 

[TotalyHucked]

Bought and assembled an engine stand for her new heart and stripped the harness, manifolds and trans off of it. Tear down will continue tomorrow

You must be registered for see images attach

You must be registered for see images attach

Sent from my iPhone using Tapatalk Pro

 

[Grit dog]

Wow, new tractor, new engine stand, new engine.
Christmas in August

 

[82sbshortbed]

After yard work I fabbed the throttle cable holder to it with my dremel. A lot less of a s in the cable between holder and firewall and is much smoother than before.

You must be registered for see images attach

Only things left are change plugs and plug in booster hose to back of carb and fire it up.

You must be registered for see images attach

 

[78C10BigTen]

Got all 4 assembled and noticed made in Taiwan. Marked them so I don't get them mixed up between pass and drivers sides. Lol

You must be registered for see images attach

Do you see a difference between the two? Other than dirty.

You must be registered for see images attach

The adjuster tabs?

 

[78C10BigTen]

Welp, I know the speedo works.... Took my old girl down hwy 85, speedo pegged all the way to the trip switch down the highway.

45 min long drive to go Texas Steakhouse for a 16oz serlion, salad, and fried pickles!


Got into a fun little skuttle with a camaro.
We kept playing "tag"

Then he eventually stomped it down and left me

You must be registered for see images attach

We all went to longhorn steakhouse today and i had the same thing. Sirloin, salad, fried pickles, mac n cheese and frosty yuengling.

 

[TotalyHucked]

Wow, new tractor, new engine stand, new engine.
Christmas in August

I wish lol. Shop and tractor is my buddy’s. Engine and stand, yes [emoji23]


Sent from my iPhone using Tapatalk Pro