What have you done to your square lately??

[gotyourgoat]

Fender lights arrived 6 days early. Yay!!

You must be registered for see images attach

You must be registered for see images attach

Put them on and yes they work and look so much better. Oh and po had wood screws holding it on. Lol

You must be registered for see images attach

Now maybe @gotyourgoat Will finally stfu about it. Lol. See dude check was in the mail. Haha

You must be registered for see images attach

Had to replace both sense the po painted it black like a ***. Lol

Yay indeed and with the trim, very nice. Much fancier than I.

Freeing to get rid of those wood screws eh? Lol.

 

[78C10BigTen]

Fender lights arrived 6 days early. Yay!!

You must be registered for see images attach

You must be registered for see images attach

Put them on and yes they work and look so much better. Oh and po had wood screws holding it on. Lol

You must be registered for see images attach

Now maybe @gotyourgoat Will finally stfu about it. Lol. See dude check was in the mail. Haha

You must be registered for see images attach

Had to replace both sense the po painted it black like a ***. Lol

Bumper looks tweaked on one side but they look great!

 

[82sbshortbed]

Yay indeed and with the trim, very nice. Much fancier than I.

Freeing to get rid of those wood screws eh? Lol.

Gotta love wood screws. Lol

But, painting the lense black? Wtf is That?

 

[82sbshortbed]

Bumper looks tweaked on one side but they look great!

Haha it is! Pass side I was barely able to get it out. Good eye lol

 

[78C10BigTen]

Hey @eskimomann209 and @Goldie Driver, i decided id put that clock in today....tore apart the whole dash and gauges, put the clock in and got the gauges all back together, clock working. Screw in the cluster and hey clocks not workin... back out it goes. I hook mine back up and it starts working. Wtf?! So after all that i put mine back in and its working so.... also played with my int wipers and realize the delay box is bad. Then after all that i go to put tranny fluid in and accidently kick over the whole quart down the front of my truck.... ****! Off to the car wash.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[fmxr47]

You must be registered for see images attach

on a positive note I installed these headlights. On a negative note my transmission started shifting weak, two nights ago it was shifting normal/somewhat hard from the TCI controller, now it feels like a cvt [emoji24]

 

[fmxr47]

Anyone have any idea why my turn signals are showing 5v when they are off and the running lights are on?


Sent from my iPhone using Tapatalk

 

[eskimomann209]

Hey @eskimomann209 and @Goldie Driver, i decided id put that clock in today....tore apart the whole dash and gauges, put the clock in and got the gauges all back together, clock working. Screw in the cluster and hey clocks not workin... back out it goes. I hook mine back up and it starts working. Wtf?! So after all that i put mine back in and its working so.... also played with my int wipers and realize the delay box is bad. Then after all that i go to put tranny fluid in and accidently kick over the whole quart down the front of my truck.... ****! Off to the car wash.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

What the fer heck!!!
I can’t remember now but want there some weird twist thing that you gotta do to get it outta “set “ mode?
It’s probably going into that mode when you tighten up that little flat head screw

 

[Goldie Driver]

What the fer heck!!!
I can’t remember now but want there some weird twist thing that you gotta do to get it outta “set “ mode?
It’s probably going into that mode when you tighten up that little flat head screw

I thought you just pulled the stem out and twisted to adjust, then pushed it back in and done- ?

 

[Goldie Driver]

Hey @eskimomann209 and @Goldie Driver, i decided id put that clock in today....tore apart the whole dash and gauges, put the clock in and got the gauges all back together, clock working. Screw in the cluster and hey clocks not workin... back out it goes. I hook mine back up and it starts working. Wtf?! So after all that i put mine back in and its working so.... also played with my int wipers and realize the delay box is bad. Then after all that i go to put tranny fluid in and accidently kick over the whole quart down the front of my truck.... ****! Off to the car wash.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

I wonder if the brown (IIRC ) power lead was just loose the whole time.

The tranny fluid will act as a rust preventative - get a few gallons for the rest of the truck.

Sorry ya spilt it - that, and the repair issues, sounds a lot like my luck.

Ugh.

 

[78C10BigTen]

I wonder if the brown (IIRC ) power lead was just loose the whole time.

The tranny fluid will act as a rust preventative - get a few gallons for the rest of the truck.

Sorry ya spilt it - that, and the repair issues, sounds a lot like my luck.

Ugh.

I actually mopped it up with a rag and wiped ot across the rad support for that reason lol

 

[78C10BigTen]

I wonder if the brown (IIRC ) power lead was just loose the whole time.

The tranny fluid will act as a rust preventative - get a few gallons for the rest of the truck.

Sorry ya spilt it - that, and the repair issues, sounds a lot like my luck.

Ugh.

My clock is still working today. Not keeping very good time but still workin

 

[Goldie Driver]

My clock is still working today. Not keeping very good time but still workin

That's the old one, right ? If so, well, you know …



How hard was it to take the pad off ? Looks relatively easy - a couple of screws and pull out to release the metal tabs, but I have never done it that way.

Always fought the cluster out around it. My upper left mounting tab was already broken when I got into it, so that makes it a shade easier for me.

Plastic POS.

Oh, and that GD aftermarket stereo mounted to a plate on the bezel that you have to find and undo pry tabs to get off, PLUS short wire leads, makes it a real PITA so have not had a lot of motivation to get back in. ironically it was right around this time last year I did my circuit board IIRC.

 

[gotyourgoat]

Hey @eskimomann209 and @Goldie Driver, i decided id put that clock in today....tore apart the whole dash and gauges, put the clock in and got the gauges all back together, clock working. Screw in the cluster and hey clocks not workin... back out it goes. I hook mine back up and it starts working. Wtf?! So after all that i put mine back in and its working so.... also played with my int wipers and realize the delay box is bad. Then after all that i go to put tranny fluid in and accidently kick over the whole quart down the front of my truck.... ****! Off to the car wash.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You are refilling the blinker fluid wrong.

 

[Goldie Driver]

Fender lights arrived 6 days early. Yay!!

You must be registered for see images attach

You must be registered for see images attach

Put them on and yes they work and look so much better. Oh and po had wood screws holding it on. Lol

You must be registered for see images attach

Now maybe @gotyourgoat Will finally stfu about it. Lol. See dude check was in the mail. Haha

You must be registered for see images attach

Had to replace both sense the po painted it black like a ***. Lol

'Bout dam time, you SLACKER !!!