Vapor lines from tanks

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

kayardee813

Junior Member
Joined
Feb 28, 2024
Posts
4
Reaction score
1
Location
Florida
First Name
Kelly
Truck Year
1985
Truck Model
K10
Engine Size
350
Hello,

I’m putting all new tanks, sending units, and fuel lines on my 1985 K10 and I have a question regarding how to vent the tanks without the vapor canister. Would a rollover valve(s) connected to the bed frame or ran up under the hood do the trick?

I’ve seen this question asked before and it usually ends up with everyone asking the poster why would they remove the canister in the first place. Well in my case, the canister was already missing when I bought the truck and I’ve scoured the usual websites for a replacement to no avail.

I appreciate the help
 

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,595
Reaction score
9,108
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
The cannister has definite value in keeping your fuel from evaporating, getting moisture in your tank ,rusting the tank,rusting the fuel lines,freezing I'm winter,but it's your truck. I've used a fuel filter plugged into a vent line to allow it to vent and still keep dirt and insects out.. I scoured for less than a minute
 

Attachments

  • Screenshot_2024-02-28_142537.jpg
    Screenshot_2024-02-28_142537.jpg
    73.4 KB · Views: 46

kayardee813

Junior Member
Joined
Feb 28, 2024
Posts
4
Reaction score
1
Location
Florida
First Name
Kelly
Truck Year
1985
Truck Model
K10
Engine Size
350
I found plenty of canisters online too, but they are either out of stock, discontinued or don’t fit my truck when I input the vehicle information.
 

TotalyHucked

Full Access Member
Joined
Feb 24, 2020
Posts
3,791
Reaction score
12,258
Location
Auburn, Georgia
First Name
Zach
Truck Year
1985
Truck Model
Sierra 1500
Engine Size
5.3
I got rid of my vapor canister when I swapped my truck. I just have a length of fuel hose run out to just in front of the back bumper along the frame rail, nothing more. Never had an issue with fumes, even in a small car trailer. I probably will add a rollover valve at some point if I ever think about it but it's been just like this for 3yrs and 35k miles.
 

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,595
Reaction score
9,108
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
I found plenty of canisters online too, but they are either out of stock, discontinued or don’t fit my truck when I input the vehicle information.
It doesn't have to be an exact replacement,just like your fuel,filter,roll over valve,open hose,etc isn't an exact replacement.
 

kayardee813

Junior Member
Joined
Feb 28, 2024
Posts
4
Reaction score
1
Location
Florida
First Name
Kelly
Truck Year
1985
Truck Model
K10
Engine Size
350
The cannister has definite value in keeping your fuel from evaporating, getting moisture in your tank ,rusting the tank,rusting the fuel lines,freezing I'm winter,but it's your truck. I've used a fuel filter plugged into a vent line to allow it to vent and still keep dirt and insects out.. I scoured for less than a minute

It doesn't have to be an exact replacement,just like your fuel,filter,roll over valve,open hose,etc isn't an exact replacement.
Ah, I see. Thank you
 

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,595
Reaction score
9,108
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
Blow up these pics.
 

Attachments

  • Screenshot_2024-02-28_152705.jpg
    Screenshot_2024-02-28_152705.jpg
    57.6 KB · Views: 45
  • Screenshot_2024-02-28_152454.jpg
    Screenshot_2024-02-28_152454.jpg
    70.9 KB · Views: 48
  • Screenshot_2024-02-28_152433.jpg
    Screenshot_2024-02-28_152433.jpg
    110.2 KB · Views: 50

Forum statistics

Threads
44,409
Posts
956,879
Members
36,727
Latest member
jmcbil24
Top