Tack Filter

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

onekarnut

Junior Member
Joined
Dec 1, 2015
Posts
10
Reaction score
0
Location
Dickinson Tx
First Name
Jim
Truck Year
1984
Truck Model
1500
Engine Size
350
Need help to locate a capicator/filter for a factory tack out of a 79 Blazer.
Does any one know the part number I could use? The harness I got with the tack did not have one, but the wiring diagram shows one in the system. Is it neccessary to have the filter in the system? Will it work without the filter? If hook up tack without the filter/capicator will it damage the tack or ign system? Can I buy a regular radio condensor like one used in a point ign system?

Thanks agin in advance.

Jim M
 

Green79Scottsdale

Full Access Member
Joined
Aug 8, 2010
Posts
2,834
Reaction score
7,487
Location
G.R. - MI
First Name
Bob
Truck Year
1979
Truck Model
K20
Engine Size
400
I am running a Sunpro tach with no filter. So you can run a tach without a filter, yes. I am hoping to get an original tach in my truck at some point, and I do plan on putting a filter on it. I was going to just get a filter from a different application around the same year, like a A- or G-body, and just run it on my truck. I chose an A- or G-body because I didn't want to pay a "Corvette tax", if you know what I mean.

I can't say I have seen a tach filter for our trucks specifically.
 

hatzie

Full Access Member
Joined
Dec 6, 2011
Posts
567
Reaction score
459
Location
NH
First Name
David
Truck Year
1976
Truck Model
k20
Engine Size
6.5

87ChevyR10

Full Access Member
Joined
Sep 2, 2013
Posts
1,125
Reaction score
66
Location
Kansas
First Name
John
Truck Year
NA
Truck Model
NA
Engine Size
NA
Silly q, what's a tach filter for? I've an el cheapo tach from O'Really's and it works fine.
 

hatzie

Full Access Member
Joined
Dec 6, 2011
Posts
567
Reaction score
459
Location
NH
First Name
David
Truck Year
1976
Truck Model
k20
Engine Size
6.5
It bleeds off unwanted electrical noise like high voltage spikes. Aftermarket tachs typically have the filter built into the tach itself GM chose not to.
 

onekarnut

Junior Member
Joined
Dec 1, 2015
Posts
10
Reaction score
0
Location
Dickinson Tx
First Name
Jim
Truck Year
1984
Truck Model
1500
Engine Size
350
Would a condensor from a point dist. work? If not I will try to construct one like hatize suggest.
Thanks guys. Always a help
 

hatzie

Full Access Member
Joined
Dec 6, 2011
Posts
567
Reaction score
459
Location
NH
First Name
David
Truck Year
1976
Truck Model
k20
Engine Size
6.5
Would a condensor from a point dist. work? If not I will try to construct one like hatize suggest.
Thanks guys. Always a help
Condenser is another name for capacitor. Its not a filter.

Sent from my SM-P605V using Tapatalk
 

Latest posts

Forum statistics

Threads
44,168
Posts
950,774
Members
36,283
Latest member
Cantrell299
Top