Opinions on getting my truck level

[jkhll8]

What would you guys do? Lowered 3 in front and back. Drop springs up front and shackles in the back. But it looks like it needs another 2 inches in the back.

You must be registered for see images attach

You must be registered for see images attach

Sent from my iPhone using Tapatalk

 

[74 Shortbed]

Flip kit.

 

[The88]

If its just a **** hair I would try to pull a leaf spring.

 

[kickdeez]

Looks like more than 1 hair to me. Not sure if a leaf will get him where he wants to be.

 

[Rusty Nail]

My first thought is "pull the overload".

My second thought was "raise the front". All you gotta do is put half a coil back in...

 

[jkhll8]

Definitely wanna lower the back


Sent from my iPhone using Tapatalk

 

[Rusty Nail]

Info.

 

[jkhll8]

It's got 3 in drop shackles on the back. Can I go to for without it hitting the bed or so I need to go to a flip


Sent from my iPhone using Tapatalk

 

[jkhll8]

Four inch shackles


Sent from my iPhone using Tapatalk

 

[Rusty Nail]

So add hangers....
That's the next step. (At the front of the spring)

 

[Swims350]

from what I read it has drop shackles, If so then do hangers. you could get drop leafs, or you could go back to stock shackle and do a flip leafs under axle that's usually 5-6 inches of drop stock.

 

[bucket]

I think it looks really good as it is

 

[Deezy]

What size wheels and tires are you running? I'm not contributing to the discussion but this is the exact stance I'm lookin' for out of mine...

 

[Rusty Nail]

Lol

 

[smoothandlow84]

You could also try removing the overload leaf springs and see if that works first since its less involved than installing a rear flip kit.

As an example...I removed my overload springs, installed a rear flip kit AND installed 2" leaf hangers (at the BACK of the axle)..... for a total of 7" drop. Start off small and work from there.....ditch the overload springs and see how much it helps. The next step would be to do a flip kit.