NP241-C, non VSS. Can I convert to VSS or no. No luck!!

[Nasty-LSX]

I have a Non Vss 241 T/C. For a ls swap I need a Vss on it. I have looked for a vss nose cone or what ever you call it with no luck
Does anyone have a remedy for this? or want to swap a non vss for a vss nose cone? I cant even find used ones for sale.

 

[vr1967]

This is what I am doing with mine, as I can’t find the rear pieces for a passenger drop 241 (i have a driver’s drop and they are different)

NP241 electronic VSS conversion kit (R2) | Walters Engineering

Electronic vehicle speed sensor conversion kit for mechanical speedo drive, NP08 transfer cases. Removes the mechanical speedometer driver hardware and replaces it with an electronic vehicle speed sensor. Our conversion kit is a 100% bolt on installation that does not require any irreversible...

www.walterseandp.com

 

[skysurfer]

What was the issue with the Dakota Digital VSS generator that Crispy suggested before?

 

[Nasty-LSX]

What was the issue with the Dakota Digital VSS generator that Crispy suggested before?

Who you askin SkySurfer?

 

[CalSgt]

I have looked for a vss nose cone or what ever you call it

Tail housing

I would go for the kit @vr1967 recommended. I did a homemade version for free but already had the reluctor wheel and sensor and got my tail housing welded for free. That kit wasn’t available when I was trying to figure it out…

You must be registered for see images attach

 

[vr1967]

Tail housing

I would go for the kit @vr1967 recommended. I did a homemade version for free but already had the reluctor wheel and sensor and got my tail housing welded for free. That kit wasn’t available when I was trying to figure it out…

You must be registered for see images attach

Got me to thinking now. I still have a driver’s drop parts 241. Wonder if I could 3d print an adapter to go in the original hole? Or machine me one out of aluminum here at work?

 

[skysurfer]

Who you askin SkySurfer?

Just some Deja Vu here>>

1988 241C non VSS. Is there a conversion kit to make it VSS??

I got a 241 with a mechanical speedo {1988} model. I need a vss for a LS swap. 6.0 4l80e. What are my options? sell this one and find a 90/91 with vss. Anyone know of a conversion? thanks

www.gmsquarebody.com

 

[Nasty-LSX]

Just some Deja Vu here>>

1988 241C non VSS. Is there a conversion kit to make it VSS??

I got a 241 with a mechanical speedo {1988} model. I need a vss for a LS swap. 6.0 4l80e. What are my options? sell this one and find a 90/91 with vss. Anyone know of a conversion? thanks

www.gmsquarebody.com

2020 holy cow I forgot about that thread. That project never happened. I'm looking at doing a
6.0 with a 4l70E and a 208 since the kit VR1967 recommended works with both T/C 208-241.

 

[Nasty-LSX]

Tail housing

I would go for the kit @vr1967 recommended. I did a homemade version for free but already had the reluctor wheel and sensor and got my tail housing welded for free. That kit wasn’t available when I was trying to figure it out…

You must be registered for see images attach

Thats pretty cool!