77c102door
Full Access Member
- Joined
- Mar 11, 2015
- Posts
- 113
- Reaction score
- 14
- Location
- Newark
- First Name
- Harjeet
- Truck Year
- 1977
- Truck Model
- c10
- Engine Size
- 350
xc_hide_links_from_guests_guests_error_hide_media
Ur welcome
How to fix loose gm steering column
- Thread starter 89Suburban
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Ur welcome
- Joined
- Jul 1, 2014
- Posts
- 6,160
- Reaction score
- 5,170
- Location
- ------
- First Name
- -------------
- Truck Year
- -------
- Truck Model
- -------
- Engine Size
- -------
Or, you could have read and watched the videos in the thread you posted that in.
77c102door
Full Access Member
- Joined
- Mar 11, 2015
- Posts
- 113
- Reaction score
- 14
- Location
- Newark
- First Name
- Harjeet
- Truck Year
- 1977
- Truck Model
- c10
- Engine Size
- 350
This video seems more clearer, plus he talks about the issue about the highbeams
pgnavy
Junior Member
- Joined
- Oct 1, 2017
- Posts
- 8
- Reaction score
- 0
- Location
- MA
- First Name
- Paul
- Truck Year
- 1987
- Truck Model
- V1500
- Engine Size
- 305
HELP needed....while using this awesome summary to get to the four loose screws in my '87 V1500 w/tilt, these 2 parts fell out onto the floor....I'm like "huh", what was that sound of parts hitting the floor?! Now for the life of me, can't seem to find out how to get them back into the column....they look broken to me....damn! much thx
You must be registered for see images attach
You must be registered for see images attach
Last edited:
- Joined
- Feb 5, 2014
- Posts
- 4,293
- Reaction score
- 3,339
- Location
- Kentucky
- First Name
- David
- Truck Year
- 1986
- Truck Model
- K10/LM7 5.3/4L60e/np208/3.73/32"
- Engine Size
- 10 yrs Air Force
going through mine now. Had an issue where the sector preload spring fell out on the floor and I didn't notice where it belonged. Finally came across Jazzman's guide to rebuilding one...and it showed me where it went lol. I noticed one post that had the link in it, thought I'd share again. Full of pics.
http://www.crankshaftcoalition.com/wiki/images/d/d6/Jazzman_Steering_Rack_Rebuild.pdf
http://www.crankshaftcoalition.com/wiki/images/d/d6/Jazzman_Steering_Rack_Rebuild.pdf
OkieFishMan
Certified Camping and Fishing Nut
- Joined
- May 8, 2017
- Posts
- 371
- Reaction score
- 203
- Location
- Enid, OK
- First Name
- OkieFishMan
- Truck Year
- 1984
- Truck Model
- GMC C2500
- Engine Size
- 454/SM465
That is the single most thorough column rebuild I have ever seen. Awesome!
- Joined
- Feb 5, 2014
- Posts
- 4,293
- Reaction score
- 3,339
- Location
- Kentucky
- First Name
- David
- Truck Year
- 1986
- Truck Model
- K10/LM7 5.3/4L60e/np208/3.73/32"
- Engine Size
- 10 yrs Air Force
rebuilt mine in a vice and is all together and mostly functional.
I noticed I could not take it out of gear in the ON/RUN position. I take the key back one click and it will move through the gears. When the key is as far back as it can go, it's in the LOCK postion and not ACC.
Ideas? I did cycle the cylinder prior to installing (as a functional check). Also, when it's in the ON/RUN position and I attempt to move the shift lever, I can see the ignition rod move/torque a bit.
I noticed I could not take it out of gear in the ON/RUN position. I take the key back one click and it will move through the gears. When the key is as far back as it can go, it's in the LOCK postion and not ACC.
Ideas? I did cycle the cylinder prior to installing (as a functional check). Also, when it's in the ON/RUN position and I attempt to move the shift lever, I can see the ignition rod move/torque a bit.
- Joined
- Feb 5, 2014
- Posts
- 4,293
- Reaction score
- 3,339
- Location
- Kentucky
- First Name
- David
- Truck Year
- 1986
- Truck Model
- K10/LM7 5.3/4L60e/np208/3.73/32"
- Engine Size
- 10 yrs Air Force
Adjusting the switch (after disassembly and re-assembly) took care of all but no ACC. It might need a new cylinder.
1987 GMC Jimmy
Automobile Hoarder
- Joined
- Jan 23, 2016
- Posts
- 5,848
- Reaction score
- 2,389
- Location
- Mississippi
- First Name
- Jesse
- Truck Year
- 1987
- Truck Model
- V1500 Jimmy
- Engine Size
- 350
I think you’re right. A cheap cylinder from O’Reilly’s remedied my lack of ACC mode.
Darstrom
Junior Member
- Joined
- Mar 11, 2017
- Posts
- 4
- Reaction score
- 0
- Location
- Sweden
- First Name
- Niklas
- Truck Year
- 1979
- Truck Model
- Jimmy
- Engine Size
- 5.7 L
Hello!
Great thread to start with..
I have a problem which I cannot find adressed anywhere. Hoping to get some answers in this thread..
I've teared down the column to the point of the pin pivot removal.
I can see the screws that might need tighten a few threads although they are not dangling loose at all.
However my problem is that the shaft is moving completely freely inside of the tube, nothing holds it centered or in place.
In other words the shaft is moving independent of the ball joint movement..
Does anyone have a clue what could be broken?
Great thread to start with..
I have a problem which I cannot find adressed anywhere. Hoping to get some answers in this thread..
I've teared down the column to the point of the pin pivot removal.
I can see the screws that might need tighten a few threads although they are not dangling loose at all.
However my problem is that the shaft is moving completely freely inside of the tube, nothing holds it centered or in place.
In other words the shaft is moving independent of the ball joint movement..
Does anyone have a clue what could be broken?
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images
You must be registered for see images
Last edited:
