High Pressure Gas shooting out filler hole

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

ocsolarguy

Junior Member
Joined
Dec 14, 2023
Posts
3
Reaction score
3
Location
Orange County Ca.
First Name
Brian
Truck Year
1978
Truck Model
K20
Engine Size
400
Hello, I have a 1978 K20 with Dual Gas Tanks with pressure building up in the gas tank as the Truck warms up (10 - 15 minute drive).
I Can see gas leaking out of cap on both sides, when the gas cap is taken off Gas Explodes out the filler hole drenching anything within 3 feet.
I have Installed 2 new tanks, 2 new sending units & 1 new fuel pump since this issue started. Please help.
 

PrairieDrifter

Full Access Member
Joined
Dec 28, 2014
Posts
3,853
Reaction score
5,646
Location
North Dakota
First Name
Mason
Truck Year
84,79,77,76,70,48
Truck Model
Suburban k10, bonanza k10, k30, k20, c10, gmc 1/2ton
Engine Size
350, 350, 350, 350, 350, 350
It's not venting. What did you do with the vent lines?
 

TotalyHucked

Full Access Member
Joined
Feb 24, 2020
Posts
3,671
Reaction score
11,855
Location
Auburn, Georgia
First Name
Zach
Truck Year
1985
Truck Model
Sierra 1500
Engine Size
5.3
Yep, need to know what you did for a vent. Your truck originally had vent lines going up front to a charcoal canister, something in that system could be clogged. I got rid of all that junk when I LS swapped my truck, I now just have a piece of fuel hose going from the vent along the frame and ends just ahead of the rear bumper. You could try this to see if it alleviates your problem. You shouldn't have vented caps on these
 

MrHorsepowerLSx

Full Access Member
Joined
Jun 25, 2021
Posts
282
Reaction score
609
Location
New Jersey
First Name
Jeffrey
Truck Year
1979
Truck Model
K35
Engine Size
454
Hellova first post :) Try running the truck with the gas caps off and see if that fixes the issue. If yes proceed to correcting the tank vent issue or replace the fuel cap with caps that are vented
 

Randy and Easton

Full Access Member
Joined
Feb 6, 2021
Posts
900
Reaction score
1,303
Location
North Richland Hills, Texas
First Name
Randy
Truck Year
1976
Truck Model
C-10 LWB
Engine Size
350
agree with all above, needs a vent. We had a similar issue with a strong gas smell around the truck all the time. Had a vented cap at the time (PO). We finally found the vent tube was cut and plugged (PO) by the radiator support and lower radiator hose. Could not find a factory charcole filter at the time so we made one with a fuel filter housing and a fuel tank vent. Cap is non vented now. Has been perfect ever since.

Randy and E
 

Attachments

  • IMG_1571.jpeg
    IMG_1571.jpeg
    163 KB · Views: 68
  • IMG_1569.jpeg
    IMG_1569.jpeg
    211.9 KB · Views: 74
  • IMG_1568.jpeg
    IMG_1568.jpeg
    243 KB · Views: 71

CountKrunk

Full Access Member
Joined
Aug 3, 2023
Posts
439
Reaction score
1,020
Location
SW VA
First Name
Count
Truck Year
1984
Truck Model
C20 Custom Deluxe 3+3
Engine Size
v8 350
You can buy activated charcoal real cheap online. And like above, rig up a canister easily.

Next time, post here before unloading the parts cannon at it.

Welcome!
 

TotalyHucked

Full Access Member
Joined
Feb 24, 2020
Posts
3,671
Reaction score
11,855
Location
Auburn, Georgia
First Name
Zach
Truck Year
1985
Truck Model
Sierra 1500
Engine Size
5.3
agree with all above, needs a vent. We had a similar issue with a strong gas smell around the truck all the time. Had a vented cap at the time (PO). We finally found the vent tube was cut and plugged (PO) by the radiator support and lower radiator hose. Could not find a factory charcole filter at the time so we made one with a fuel filter housing and a fuel tank vent. Cap is non vented now. Has been perfect ever since.

Randy and E
That's pretty slick! I just have a hose on mine, no rollover valve or filter or anything, but I'd like to add something like that for when it's stored in a small space.
 

ocsolarguy

Junior Member
Joined
Dec 14, 2023
Posts
3
Reaction score
3
Location
Orange County Ca.
First Name
Brian
Truck Year
1978
Truck Model
K20
Engine Size
400
I appreciate the advice from everyone.
The vent hoses are connected, not clogged or cracked.
I did take off both gas caps and it took a little longer to spew.
Soo many hoses and make shift vent canisters to know where to start, but I'll take photos.
I will replace all 4 canisters and see what happens

Its the old truck my dad and I used for hunting when I was a kid. I'd like to keep it.
When Dad passed away I found the truck fully submerged in his lake. Drained all fluids and
drove it from Texas to Ca. 3 years ago and this issue just started

There's some real knuckleheads that think their mechanics, I took it to a few of them.
 

SquareRoot

Full Access Member
Joined
Mar 18, 2017
Posts
4,192
Reaction score
8,030
Location
Arizona
First Name
Mike
Truck Year
85
Truck Model
K20
Engine Size
350
I appreciate the advice from everyone.
The vent hoses are connected, not clogged or cracked.
I did take off both gas caps and it took a little longer to spew.
Soo many hoses and make shift vent canisters to know where to start, but I'll take photos.
I will replace all 4 canisters and see what happens

Its the old truck my dad and I used for hunting when I was a kid. I'd like to keep it.
When Dad passed away I found the truck fully submerged in his lake. Drained all fluids and
drove it from Texas to Ca. 3 years ago and this issue just started

There's some real knuckleheads that think their mechanics, I took it to a few of them.
4 cannisters? :popcorn:
 

ocsolarguy

Junior Member
Joined
Dec 14, 2023
Posts
3
Reaction score
3
Location
Orange County Ca.
First Name
Brian
Truck Year
1978
Truck Model
K20
Engine Size
400
Hellova first post :) Try running the truck with the gas caps off and see if that fixes the issue. If yes proceed to correcting the tank vent issue or replace the fuel cap with caps that are vented
Yeah, I appreciate the help, but I replaced the gas caps - That didn't work, I replaced 2 of the 4 Charcoal Canisters I'm not sure what the other 2 Cans do. Nevertheless, its fixed! I also replace all hoses & rearranged the hoses at that hub thing under the gas tank and somehow it works. I think the last guy I had work on it was drunk !
 

SquareRoot

Full Access Member
Joined
Mar 18, 2017
Posts
4,192
Reaction score
8,030
Location
Arizona
First Name
Mike
Truck Year
85
Truck Model
K20
Engine Size
350
Yeah, I appreciate the help, but I replaced the gas caps - That didn't work, I replaced 2 of the 4 Charcoal Canisters I'm not sure what the other 2 Cans do. Nevertheless, its fixed! I also replace all hoses & rearranged the hoses at that hub thing under the gas tank and somehow it works. I think the last guy I had work on it was drunk !
Nothing wrong with being drunk if you know what you're doing. It's better than fixing something and not knowing how you did it.
 

Doppleganger

Full Access Member
Joined
May 24, 2019
Posts
12,705
Reaction score
58,937
Location
OH-MI: Just like it sounds
First Name
Chris
Truck Year
1985
Truck Model
K20
Engine Size
5.7
Yeah, I appreciate the help, but I replaced the gas caps - That didn't work, I replaced 2 of the 4 Charcoal Canisters I'm not sure what the other 2 Cans do. Nevertheless, its fixed! I also replace all hoses & rearranged the hoses at that hub thing under the gas tank and somehow it works. I think the last guy I had work on it was drunk !
FOUR charcoal canisters? Never saw more than one on anything.

Can you blow air through the vent hose to make sure it doesn't have a blockage upstream like a spiders nest, etc?
 

Latest posts

Forum statistics

Threads
44,160
Posts
950,626
Members
36,273
Latest member
dannyphx
Top