debben69
Junior Member
- Joined
- Sep 23, 2021
- Posts
- 6
- Reaction score
- 8
- Location
- North Dakota
- First Name
- Darren
- Truck Year
- 1973
- Truck Model
- K10
- Engine Size
- 350
I have a 73 K10 with a 350. I have owned this pickup for around 12 years. It was a running project when I bought it. It has been primarily used as a fuel service unit for my farm so it doesn't get much attention or driven much other than annual oil changes. Anyway, it has sparked my interest and I've been slowly fixing and correcting previous owners surprises. It has more problems than a math book.
The question I have is pertaining to the fuel lines as I am getting the fuel guage to work. It has a single passenger side tank with two lines coming off the sending unit which I presume to be the draw line and a return line. Currently the draw line is hooked up to the fuel pump and the other line is capped off on the pump and from the tank. Here is where I am confused, the hard line in which I presume to be the return, runs past the fuel pump and in front of the motor and stops by the steering box. If it was supposed to be a return, why wouldn't it end at the same place as the draw line by the fuel pump? I'd like some input before I cut the hard line by the pump so I don't have fuel lines zig zagging around the engine compartment. Thanks in advance!
The question I have is pertaining to the fuel lines as I am getting the fuel guage to work. It has a single passenger side tank with two lines coming off the sending unit which I presume to be the draw line and a return line. Currently the draw line is hooked up to the fuel pump and the other line is capped off on the pump and from the tank. Here is where I am confused, the hard line in which I presume to be the return, runs past the fuel pump and in front of the motor and stops by the steering box. If it was supposed to be a return, why wouldn't it end at the same place as the draw line by the fuel pump? I'd like some input before I cut the hard line by the pump so I don't have fuel lines zig zagging around the engine compartment. Thanks in advance!