Front sway bar recommendations

[rwljpl]

Advice on a sway bar for a 1985 k10 with 2” lift
Addco or LMC?
Do I need any special mounting hardware since I have some lift? Anything I should know before installing?
Thnx

 

[Blue Ox]

https://www.gmsquarebody.com/threads/factory-sway-bar.23924/

 

[Dutch Rutter]

Most people here suggest removing the sway bar on a 4x4 and call it a day. But the LMC should be original equipment and will work. Nothing special needed unless you are 4" or higher in lift. That is when binding can be a problem.

 

[Blue Ox]

Oop, sorry. I missed where it was a 4WD. But still, it depends on your purposes. On the street a swaybar is a good thing, but offroad not so much. Most offroaders use a detachable, since off road, articulation is king. But once you're back on the road a swaybar becomes a good thing again.

 

[rwljpl]

Yeah, I’m on the street which is why I’d like to have it. Thanks for the help!

 

[omillan99]

Not sure if you had fixed your issues with this but ORD has a Disconnect kit to switch between on and off for on-road and off-road use. AFAIK you use your stock sway bar and attach it to the axle. But it does require a minimum of 2 IN of lift which you do have.

https://www.offroaddesign.com/catalog/swaybarkit.htm