Exhaust pipe bracket

[Rich77]

Hello All,
Regarding the bracket that bolts to the inside of the frame-
For those of you who have gone from single to dual exhaust or have needed to replace an exhaust bracket, what have you used or where have you bought one?
I can’t find new oem style brackets.
I thought that maybe I would fab some 3/16” thick triangle shaped brackets.
But if someone already makes a replacement, I would probably just buy that.

 

[vr1967]

Are you needing the driver’s side or passenger’s side brackets? I may still have a set from a factory dual exhaust pickup

 

[Rich77]

I actually need both. My truck was single pipe but the brackets were rotted.

 

[CalSgt]

I used these hangers from Summit if you’re willing to weld, I couldn’t find any good pictures of how the rear mounts are bolted up.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[Rich77]

Thank you!

 

[Rich77]

Instead of welding in brackets/hangers, I decided to run an aluminum angle from one side to the other and bolt my hangers to that. I’ll trim the hangers down.
Does anyone see an issue with that?

 

[75gmck25]

I have a similar bracket setup at the front of my mufflers but used HD angle iron with pre-punched holes. It’s not that attractive, but it works.