Electrical and Harness Repair Parts

[HotRodPC]

Here is a link to an auto electric supply retailer. It appears they have just about any connector you could need to repair your harnesses or build your own.

http://www.repairconnector.com/


Feel free to add links to other auto electric repair related links.


Here is a link to Painless Wiring products. I avoid these when I can since they are very painful in the ass where my wallet sits. Easy to use products if you want to spend the big bucks.

http://www.painlesswiring.com/

 

[ashleyjnc]

Wanted: Wiring Harness

Oddly enough it wouldn't let me post this in wanted I would like to buy a complete wiring harness for a 1989 C3500 (Square body crew cab).

 

[RetroC10Sport]

Oddly enough it wouldn't let me post this in wanted I would like to buy a complete wiring harness for a 1989 C3500 (Square body crew cab).

A C3500 would be the GMT400 style, an R3500 would be what you have.

And sadly, a 1989 454 R3500 just hit the crusher at our local U-Pull-It...

 

[Driver4r]

A C3500 would be the GMT400 style, an R3500 would be what you have.

And sadly, a 1989 454 R3500 just hit the crusher at our local U-Pull-It...

He might be referring to the C as a 2wd.

 

[RetroC10Sport]

In 1987, GM went from C/K to R/V. It's confusing to many but the C/K became the GMT400.

 

[89Suburban]

The whole R/V thing confuses me. I thought that was a 88-91 Burb designation but I seems to be more than that.


Posted from mobile...

 

[RetroC10Sport]

1973-86 squarebody 2WD = C
1988+ GMT400 2WD = C

1973-86 squarebody 4WD = K
1988+ GMT400 4WD = K

1987-91 squarebody 2WD = R
1987-91 squarebody 4WD = V

 

[Jims86]

They used it again in 98-2000

 

[RetroC10Sport]

They used it again in 98-2000

On what?

 

[kleedus]

luke (oneluckypops) on this board does awsome work on wiring harnesses he done a great job on my 96 vortec swap harness

 

[ashleyjnc]

c3500?

Thanks Guys, Sorry I meant to check back in before now. That stinks that they crushed one! I am going to try the local pick a parts after the holidays...... Unfortunately the metal prices make these old relics get squashed way too often. I may be designating it wrong.. it is a giant red car hauler ha. I hope to have it painted maybe in the spring in satin black.. the red is overkill. We just finished up the motor swap, and she purrs like a kitten! We have traced down most of the rogue wiring and eliminated it. I thought I had seen it all when there was an appliance cord that was cut and spliced into my Yamaha Rhino, but alas, sadly, this had appliance cords and more. I say "we" I really mean HE did it but I figure moral support counts for something If I did this correctly there should be a pic of my big red beast we are currently calling "Clifford" ha.

You must be registered for see images

 

[HotRodPC]

That's a cool truck.

 

[ashleyjnc]

Thanks I know the wing and stacks are a little redneck but I do live in Western NC so I suppose it's allowed

 

[HotRodPC]

Thanks I know the wing and stacks are a little redneck but I do live in Western NC so I suppose it's allowed

True. I'm not a big fan or visors either. I know they have a good benefit but look hideous to me. That one is one of the better ones I've seen though. The way it fits the trucks. Most others look like a figgin duck bill sticking straight out from the cab. You got some missles for cab roof lights too.

 

[ashleyjnc]

haha, that's so funny he said the same exact thing about this particular visor..... if it gets painted he will more than likely grub all that and weld it back normal. I haven't seen those particular lights before... they are rather big! It has two holes where apparently they had some monstrosity spotlights on it too. But we bought it at a good deal, and have a few 454s hoarded, he swapped it out and the guy I got it from just redid the transmission, looking forward to seeing how well it hauls/pulls. We are NOT diesel people at all, there was a paxton supercharger here locally on CL for $1150 OBO....... Have any of y'all tried running one?