Doubledingo's other 65 C20, Mean Green

[DoubleDingo]

Here's the pics.

Starting a new thread since this is going on a different truck.

The backing plates should be able to be straightened. If not, I'll order some new ones.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Good stuff, even with the minimal damage to the backing plates.

 

[legopnuematic]

Nice get! I'd try to find a socket or a rod or something about equal to the gap in-between the rotor and backing plate and stick it and roll the rotor, maybe tap on the outside of the backing plate, kind of like a hammer and dolly to get it back into shape.

 

[DoubleDingo]

Nice get! I'd try to find a socket or a rod or something about equal to the gap in-between the rotor and backing plate and stick it and roll the rotor, maybe tap on the outside of the backing plate, kind of like a hammer and dolly to get it back into shape.

I don't have the means to stick it to the rotor, but I like your idea.