Donkey. Dirt track race car build.

[bucket]

It has no face! Lol.

Maybe screw the stock bezels onto there? Or headlight stickers? Or big googly eyes? Lol

 

[AyWoSch Motors]

It has no face! Lol.

Maybe screw the stock bezels onto there? Or headlight stickers? Or big googly eyes? Lol

I have that problem with my blazer. I took the old wobbly core support off, and made my own, but when I was done, I realized it didnt have a face anymore. So I zip tied the old 75 blazer grill on, so it wouldnt look goofy, but one day I was driving around, and the damn thing fell off, and got destroyed. Now its goofy and faceless again, and I destroyed a perfectly good grill. Grrr.

 

[wanderinthru]

It has no face! Lol.

Maybe screw the stock bezels onto there? Or headlight stickers? Or big googly eyes? Lol

Sure it will end up with plenty of black eyes!
Was going to run the original front end, until it got tore up. Decided to just chunk it, for weight loss and the old original would collect alot of mud.

 

[AyWoSch Motors]

Sure it will end up with plenty of black eyes!
Was going to run the original front end, until it got tore up. Decided to just chunk it, for weight loss and the old original would collect alot of mud.

Just spray paint a grill like thing on it, haha.

 

[AyWoSch Motors]

Won't that restrict air flow to the radiator, or are you putting it in the back?

You could also always plasma cut a grill and headlight shape in that sheet.

 

[wanderinthru]

Won't that restrict air flow to the radiator, or are you putting it in the back?

You could also always plasma cut a grill and headlight shape in that sheet.

Will be alot of rad under it, and the rad will be 8ish inches behind it...I think. will hole saw air holes if/as needed. Plan to paint a GMC emblem on it, if time allows.

 

[idahovette]

When does the season start @wanderinthru ?

 

[wanderinthru]

When does the season start @wanderinthru ?

3rd saturday in April, practice the 2 saturdays before. Not for sure I'm going to be finished by then?

 

[89Suburban]

It has no face! Lol.

Maybe screw the stock bezels onto there? Or headlight stickers? Or big googly eyes? Lol

Sleeper grille FTW!

 

[Old77]

Well this is definitely interesting! I’m subbed to follow along

 

[wanderinthru]

We are running out of time.
Framed up the battery mount.

You must be registered for see images attach

Rear end is out to be welded out. Plan on ordering parts today.

You must be registered for see images attach

Built yokes and linkage. Got it put in, so clutch and brake assembly is done.

You must be registered for see images attach

Got the 461s apart and started cleaning them up.

You must be registered for see images attach

You must be registered for see images attach

 

[wanderinthru]

Things have been stupid busy round here, so the race car has been put back. But, got the door bars bent and tacked.

You must be registered for see images attach

Dash and window bars.

You must be registered for see images attach

Hood

You must be registered for see images attach

Fuel cell is mounted

You must be registered for see images attach

Ford 9 inch is welded out

You must be registered for see images attach

 

[wanderinthru]

Various stuff done on the carrier, and figuring out an engine.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[AyWoSch Motors]

Awesome job, really looking great.



Big block??

You must be registered for see images attach

 

[wanderinthru]

Awesome job, really looking great.



Big block??

You must be registered for see images attach

Thanks, nope just a 4 bolt small block