Changing gear ratios: opinions/suggestions wanted!!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

BigT

Junior Member
Joined
Oct 17, 2024
Posts
19
Reaction score
46
Location
Selah, WA
First Name
Tim
Truck Year
1978
Truck Model
Scottsdale K20
Engine Size
350
My 78 K20 4x4 has factory 4:56 gears in it and a TH400 transmission. These are great when off-road or pulling something, but poor on the highway. I grew up with a 75 half ton 4x4 with 3:73 gears and a 4 speed manual, which was very versatile for both off-road and highway, but that was partly due to the 4 speed manual transmission. I'd like to switch out my low gears for something more versatile, but I can't decide on 3:73s or 4:10s, as I don't have an experience with either ratio in combination with the TH400, since I just bought the truck a few weeks ago. I'm leaning toward 4:10s, as I used to have a 74 F150 with something close to that combo, and I liked it. But, the 3:73 is the more common one and gets better mileage, etc. We've touched on this in another thread, but I'd really like some more thoughts from other folks who have experience with either. Thanks!
 

77Dmax

Junior Member
Joined
Nov 10, 2024
Posts
15
Reaction score
18
Location
vt
First Name
Joe
Truck Year
1977
Truck Model
c20
Engine Size
6.6
A 4l80e with a standalone computer would be pretty slick here, otherwise I would go 4.10s.
 

BigT

Junior Member
Joined
Oct 17, 2024
Posts
19
Reaction score
46
Location
Selah, WA
First Name
Tim
Truck Year
1978
Truck Model
Scottsdale K20
Engine Size
350
So tell me more about the tranny swap options - 4L80E or 700R4? Is that less work/cost than swapping gears and carriers?
 

CountKrunk

Full Access Member
Joined
Aug 3, 2023
Posts
421
Reaction score
983
Location
SW VA
First Name
Count
Truck Year
1984
Truck Model
C20 Custom Deluxe 3+3
Engine Size
v8 350
I want to go 4L80e with a standalone.

Anyone use these guys before?

 

DoubleDingo

Full Access Member
Joined
Jul 3, 2012
Posts
11,225
Reaction score
17,065
Location
Right where I am
First Name
Bagoomba
Truck Year
1981
Truck Model
81-C20 Silverado Camper Special-TH400-4.10s
Engine Size
Carb'ed Vortec 350
Gear swap would be 3.73. My 81 has 4.10s, and they are fine, but only around town or short runs on the highway where I can keep it around 60-65 tops. Highway, the engine is turning pretty good, more than I'd like while going so slow. 3.73s will drop the rpms down some. You have enough slippage with the TH400, 3.73s would be ideal for what you're doing with it. Yes, 4L80E and no gear change gives you the same gearing down low and overdrive for the highway. It all depends what you want to spend your money on and what you want to modify to get the results you're looking for.
 

Forum statistics

Threads
44,081
Posts
948,967
Members
36,154
Latest member
bhemric
Top