Can it be saved

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Michael Benardo

Full Access Member
Joined
Nov 14, 2020
Posts
113
Reaction score
44
Location
Vallejo, California
First Name
Michael
Truck Year
1973
Truck Model
C 25
Engine Size
292 Cubes
Nope...No way is it ever going to work again after sittin' for 10 years. Way TOO long for any vehicle. So just have it shipped over here to me.... aka...."Mike's GM Square Hospice House" and I will gently help it move on to the next life!! What are friends for...Right! lol:party52:
This web-site is dedicated to keeping Square Bodies on the road, not to get them scrapped and the metal sent to Japan.
 

Salty Crusty

Full Access Member
Joined
Apr 10, 2020
Posts
211
Reaction score
231
Location
Texas
First Name
Gary
Truck Year
1986
Truck Model
c1500
Engine Size
565
Short squirt of WD-40 in each bore. Doesn't take much, capillary action will get it pretty much all the way around the bore.
I would mark and pull the distributor and re-prime it so you don't have dry lifters on dry cam lobes.
Swap the gas and fire it up!

If you'll watch some of the RoadKill shows, they've fired up some engines that have sat for twice this long with no issues.
 

Paladin

"Teufelshunde"
Joined
Jan 1, 2018
Posts
1,726
Reaction score
6,066
Location
Wichita Falls, Texas
First Name
Mike
Truck Year
1985
Truck Model
C30 Silverado Crew Cab Dually
Engine Size
468
This web-site is dedicated to keeping Square Bodies on the road, not to get them scrapped and the metal sent to Japan.

Damn, lighten up dude, my post was meant in jest. Maybe Santa will bring you a sense of humor for Christmas!
 

RoryH19

Full Access Member
Joined
Aug 21, 2015
Posts
1,668
Reaction score
1,082
Location
Texas
First Name
Rory
Truck Year
1987
Truck Model
R10 Silverado SWB
Engine Size
350 TBI
Short squirt of WD-40 in each bore. Doesn't take much, capillary action will get it pretty much all the way around the bore.
I would mark and pull the distributor and re-prime it so you don't have dry lifters on dry cam lobes.
Swap the gas and fire it up!

If you'll watch some of the RoadKill shows, they've fired up some engines that have sat for twice this long with no issues.

I did the same with PB blaster. pulled the plugs, sprayed each piston and let if sit for a week. sprayed a few times during the week. engine would then turn. put a starter, fuel pump and used a plastic gas tank for fuel. Put new plugs in too and cleaned the disco and rotor. After some cranking it fired up. you can't believe all of the debris that came out of the exhaust. it sat in a field for 10+ years.
 

Michael Benardo

Full Access Member
Joined
Nov 14, 2020
Posts
113
Reaction score
44
Location
Vallejo, California
First Name
Michael
Truck Year
1973
Truck Model
C 25
Engine Size
292 Cubes
Damn, lighten up dude, my post was meant in jest. Maybe Santa will bring you a sense of humor for Christmas!
You should see what has happened here in California. There are almost ZERO American cars left on the road, so yes, I am sensitive about that.
 

gotyourgoat

Full Access Member
Joined
Mar 27, 2014
Posts
2,117
Reaction score
3,418
Location
NRV Virginia
First Name
gotyourgoat
Truck Year
1984
Truck Model
c10
Engine Size
smokin' 305
Don't listen to scrappers. If your engine is free, yes you can put it back on the road. You might have to rebuild the brake system, and your pinion shaft and axle shaft seals might go, but your engine should be fine.

You apparently don't know where you are or what you are talking about.
 

RecklessWOT

Full Access Member
Joined
Feb 20, 2015
Posts
2,556
Reaction score
4,764
Location
New Hampshire
First Name
Kevin
Truck Year
1987
Truck Model
V10 Suburban Silverado
Engine Size
350 TBI
This web-site is dedicated to keeping Square Bodies on the road, not to get them scrapped and the metal sent to Japan.
Dude, it was obviously a joke. Like the truck is most likely fine and they are jokingly saying "oh, no you should just send it to me"
 

WebMonkey

Full Access Member
Joined
Jan 3, 2020
Posts
720
Reaction score
1,542
Location
Missouri Ozarks
First Name
Chris
Truck Year
1985
Truck Model
K20
Engine Size
350
You should see what has happened here in California. There are almost ZERO American cars left on the road, so yes, I am sensitive about that.

sorry for dragging the post further off topic;

the reason so many members said 'scrap and send it to ME' is that USED to be a very common phrase.

it was ALWAYS intended to the person posing the question, that whatever they had, it was worth the responder's effort/money to have it and love on it.

if you venture to any other forum on any other topic, you WILL encounter this response again.

to translate into another verbage:

'sounds like you've got something i'd put time/effort into in a heartbeat'.

finally :), this forum has been around awhile. you might try 'reading the room' before you take offense at 49 other states and several other countries.

back to the OP:

shoot, sounds like way more trouble than it's worth. send it to me and i'll get that eyesore out of your sight!
;)
 

Michael Benardo

Full Access Member
Joined
Nov 14, 2020
Posts
113
Reaction score
44
Location
Vallejo, California
First Name
Michael
Truck Year
1973
Truck Model
C 25
Engine Size
292 Cubes
sorry for dragging the post further off topic;

the reason so many members said 'scrap and send it to ME' is that USED to be a very common phrase.

it was ALWAYS intended to the person posing the question, that whatever they had, it was worth the responder's effort/money to have it and love on it.

if you venture to any other forum on any other topic, you WILL encounter this response again.

to translate into another verbage:

'sounds like you've got something i'd put time/effort into in a heartbeat'.

finally :), this forum has been around awhile. you might try 'reading the room' before you take offense at 49 other states and several other countries.

back to the OP:

shoot, sounds like way more trouble than it's worth. send it to me and i'll get that eyesore out of your sight!
;)
Only one said it.
 

Forum statistics

Threads
44,173
Posts
950,862
Members
36,288
Latest member
brentjo
Top