Camshaft input from experience.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

jasonconaway

Junior Member
Joined
Jun 7, 2014
Posts
15
Reaction score
4
Location
NC
First Name
Jason
Truck Year
84
Truck Model
C10
Engine Size
305
Looking to get a cam for my 355 that’s waiting in line at the machine shop to be built. Going into a pretty much stock 84 C10. Th350. 3.42 posi rear. The engine will have stock bottom end. Pro-Filer aluminum heads. About 10:1 compression. I have called and spoke with Lunati, Howard’s and Isky reps. These are the cams they recommended. The truck will be a cruiser. A couple times down the track. Of corse I want that mean idle as well as good overall performance. Any input from guys who have run any of these or guys with engine building experience.
Isky: 280 Mega cam 2500-6800rpm 10120703lk
  • Mega Racing Cam
  • Hyd.
  • Valve Lift Int/Ext. 0.485
  • Valve Lash Hot Int/Ext. 0.000
  • ADV Duration Int/Ext. 280
  • 0.050 Duration Int/Ext. 232
  • Lobe Center 108


  • Lunati: 268 Voodoo 10120703lk
  • Advertised Duration (Int/Exh): 268/276; Duration @ .050 (Int/Exh): 227/233; Gross Valve Lift (Int/Exh): .489/.504; LSA/ICL: 110/106; Valve Lash (Int/Exh): Hyd/Hyd; RPM Range: 1800-6200;

    Howards: CL110951-10
  • Hydraulic Flat Tappet
    Basic RPM Range:
     2000 to 6000
    Valve Lift Intake:
     .470
    Valve Lift Exhaust:
     .470
    Duration Intake:
     275
    Duration Exhaust:
     285
    Duration at 050 Intake:
     221
    Duration at 050 Exhaust:
     231
    Lobe Separation:
     110
    Intake Centerline:
     106

    Thanks for any input!
 
Last edited:

nvrenuf

Full Access Member
Joined
Jul 30, 2010
Posts
1,956
Reaction score
2,456
Location
Mobile, Al.
First Name
John
Truck Year
1991
Truck Model
K5
Engine Size
454
You said the "engine will have stock bottom end" but also 10:1 compression? Are you replacing the pistons? If so, what kind?

Not all pistons like high rpm so make sure all of your parts work together.
 

jasonconaway

Junior Member
Joined
Jun 7, 2014
Posts
15
Reaction score
4
Location
NC
First Name
Jason
Truck Year
84
Truck Model
C10
Engine Size
305
You said the "engine will have stock bottom end" but also 10:1 compression? Are you replacing the pistons? If so, what kind?

Not all pistons like high rpm so make sure all of your parts work together.
Will have hypereutectic pistons prob stock rods with ARP rod bolts. Not gonna be turning this engine high.
A local machine shop is doing the build. I’m just picking the camshaft.


Sent from my iPhone using Tapatalk
 

jasonconaway

Junior Member
Joined
Jun 7, 2014
Posts
15
Reaction score
4
Location
NC
First Name
Jason
Truck Year
84
Truck Model
C10
Engine Size
305
Give up the mean idle!!!
I know. This is my first hot rod and I’m 41. I have always wanted a mean sounding idle. It’s tough to let that go. A good lope is fine with me. From the videos I’ve seen with these cams, they all have a decent lope to them.


Sent from my iPhone using Tapatalk
 

jasonconaway

Junior Member
Joined
Jun 7, 2014
Posts
15
Reaction score
4
Location
NC
First Name
Jason
Truck Year
84
Truck Model
C10
Engine Size
305
Anyone else with an opinion as to which of the 3 camshafts list I should go with?


Sent from my iPhone using Tapatalk
 

QBuff02

I like Big Blocks and I cannot lie
Joined
Feb 28, 2017
Posts
867
Reaction score
1,598
Location
Central IL
First Name
Quincy
Truck Year
1982
Truck Model
K30
Engine Size
454
if those are your 3 choices, out of those 3 i'd go with the Lunati. The 268 grinds are all good no matter the cam company. A Comp Cams XE268 is also pretty comparable to the Lunati 268 grind but comp cams XE grinds generally tend to be on the noisy side of things and the Lunati will generally make a little more power. Any of these cams is going to require a looser torque converter though, and your taller gears will make the bottom end suffer even more. I'd almost consider a cam one size smaller than any listed above, you'd give up a little of the lope (it would still be noticeable at idle) but have better streetability. I have installed two comp cams XE268's in sbc's and had good luck with both and liked their performance, one in an automatic and one in a 4 speed, but both had 4.10 gears. I currently have a Lunati voodoo 268 in my 454 with a 2,400rpm stall and 4.10 gears and it will absolutely boil the tires at any time from a dead stop up to about 25 mph. But, it's also a big block and that's a big difference from a small block. Any cam of 230 degrees @ .050 and below is good for a mix of street and spirited driving, but i'd go a touch smaller if it's going to be mostly street driven. or throw caution to the wind and let it rip. But that's my .02.
 

jasonconaway

Junior Member
Joined
Jun 7, 2014
Posts
15
Reaction score
4
Location
NC
First Name
Jason
Truck Year
84
Truck Model
C10
Engine Size
305
if those are your 3 choices, out of those 3 i'd go with the Lunati. The 268 grinds are all good no matter the cam company. A Comp Cams XE268 is also pretty comparable to the Lunati 268 grind but comp cams XE grinds generally tend to be on the noisy side of things and the Lunati will generally make a little more power. Any of these cams is going to require a looser torque converter though, and your taller gears will make the bottom end suffer even more. I'd almost consider a cam one size smaller than any listed above, you'd give up a little of the lope (it would still be noticeable at idle) but have better streetability. I have installed two comp cams XE268's in sbc's and had good luck with both and liked their performance, one in an automatic and one in a 4 speed, but both had 4.10 gears. I currently have a Lunati voodoo 268 in my 454 with a 2,400rpm stall and 4.10 gears and it will absolutely boil the tires at any time from a dead stop up to about 25 mph. But, it's also a big block and that's a big difference from a small block. Any cam of 230 degrees @ .050 and below is good for a mix of street and spirited driving, but i'd go a touch smaller if it's going to be mostly street driven. or throw caution to the wind and let it rip. But that's my .02.
Appreciate the advice! My th350 is turning pretty good at highway speeds. Didn’t wanna go with a 3.73 or higher due to this reason.


Sent from my iPhone using Tapatalk
 

75gmck25

Full Access Member
Joined
Oct 13, 2016
Posts
2,263
Reaction score
2,206
Location
Northern Virginia
First Name
Bruce
Truck Year
1975
Truck Model
K25 Camper Special TH350 NP203
Engine Size
5.7
If you are not willing to go with lower gears, you need a high stall torque converter (and maybe smaller tires?). Those cams need some RPM to get up into the torque curve and you have a heavy vehicle that needs torque to get off the line. It might feel really peppy from a 1st gear rolling start or kickdown and merge onto the highway, but racing it from a standing start will probably not work well.

If it was my truck and I wanted to drag race it every once and a while I think I would want 4.10 posi gears and a high stall converter in the TH350. Its somewhat of a PIA to put up with the higher RPM on the street, but it will really wake up a high duration cam when you have good compression and performance heads.
 

jasonconaway

Junior Member
Joined
Jun 7, 2014
Posts
15
Reaction score
4
Location
NC
First Name
Jason
Truck Year
84
Truck Model
C10
Engine Size
305
If you are not willing to go with lower gears, you need a high stall torque converter (and maybe smaller tires?). Those cams need some RPM to get up into the torque curve and you have a heavy vehicle that needs torque to get off the line. It might feel really peppy from a 1st gear rolling start or kickdown and merge onto the highway, but racing it from a standing start will probably not work well.

If it was my truck and I wanted to drag race it every once and a while I think I would want 4.10 posi gears and a high stall converter in the TH350. Its somewhat of a PIA to put up with the higher RPM on the street, but it will really wake up a high duration cam when you have good compression and performance heads.
I’m definitely going with a higher stall converter. I just installed the new 3.42 gears with a Yukon limited slip. This truck will be 95% Street. Maybe a test n tune once or twice a year.


Sent from my iPhone using Tapatalk
 

jasonconaway

Junior Member
Joined
Jun 7, 2014
Posts
15
Reaction score
4
Location
NC
First Name
Jason
Truck Year
84
Truck Model
C10
Engine Size
305
If you are not willing to go with lower gears, you need a high stall torque converter (and maybe smaller tires?). Those cams need some RPM to get up into the torque curve and you have a heavy vehicle that needs torque to get off the line. It might feel really peppy from a 1st gear rolling start or kickdown and merge onto the highway, but racing it from a standing start will probably not work well.

If it was my truck and I wanted to drag race it every once and a while I think I would want 4.10 posi gears and a high stall converter in the TH350. Its somewhat of a PIA to put up with the higher RPM on the street, but it will really wake up a high duration cam when you have good compression and performance heads.
I’m definitely going with a higher stall converter. I just installed the new 3.42 gears with a Yukon limited slip. This truck will be 95% Street. Maybe a test n tune once or twice a year.


Sent from my iPhone using Tapatalk
 

Midnightmoon

Full Access Member
Joined
Oct 11, 2020
Posts
1,105
Reaction score
3,176
Location
Pennsylvania
First Name
Justin
Truck Year
1979
Truck Model
C10
Engine Size
305
After the first engine that I built for my former '70 Nova went horribly wrong, my uncle gave me some advice that I have followed ever since. "When it comes to carbs and cams, you can never go wrong going small for a street engine"
 

82sbshortbed

Fuckemall!!
Joined
Mar 1, 2018
Posts
15,828
Reaction score
53,156
Location
SE Texas
First Name
Doug
Truck Year
1982, 1984
Truck Model
1500 shortbed, 1500 longbed
Engine Size
454, 305
if those are your 3 choices, out of those 3 i'd go with the Lunati. The 268 grinds are all good no matter the cam company. A Comp Cams XE268 is also pretty comparable to the Lunati 268 grind but comp cams XE grinds generally tend to be on the noisy side of things and the Lunati will generally make a little more power. Any of these cams is going to require a looser torque converter though, and your taller gears will make the bottom end suffer even more. I'd almost consider a cam one size smaller than any listed above, you'd give up a little of the lope (it would still be noticeable at idle) but have better streetability. I have installed two comp cams XE268's in sbc's and had good luck with both and liked their performance, one in an automatic and one in a 4 speed, but both had 4.10 gears. I currently have a Lunati voodoo 268 in my 454 with a 2,400rpm stall and 4.10 gears and it will absolutely boil the tires at any time from a dead stop up to about 25 mph. But, it's also a big block and that's a big difference from a small block. Any cam of 230 degrees @ .050 and below is good for a mix of street and spirited driving, but i'd go a touch smaller if it's going to be mostly street driven. or throw caution to the wind and let it rip. But that's my .02.


I'm interested in your RPMs at 55 with 4.10 gears. What tires you got? Od transmission?

Reason I ask is I just put 3.73 gears in my truck with th350 and 275/60/15 tires and a 454. 55 mph =2700rpm. It barks the tires when shifting now and burnouts are easily available but, I can't drive it on the highway at 55 for very long. Lol
 

jasonconaway

Junior Member
Joined
Jun 7, 2014
Posts
15
Reaction score
4
Location
NC
First Name
Jason
Truck Year
84
Truck Model
C10
Engine Size
305
I'm interested in your RPMs at 55 with 4.10 gears. What tires you got? Od transmission?

Reason I ask is I just put 3.73 gears in my truck with th350 and 275/60/15 tires and a 454. 55 mph =2700rpm. It barks the tires when shifting now and burnouts are easily available but, I can't drive it on the highway at 55 for very long. Lol
I have a new tach that I’m hoping to get out in, today or very soon. I have the Th350 as well. I looked at some gear vs rpm charts and calculators. I wanted to stay close to 2500 as possible. I have 3.42 gears. Not 4.10.


Sent from my iPhone using Tapatalk
 

Latest posts

Forum statistics

Threads
44,162
Posts
950,645
Members
36,276
Latest member
2manysquares2care
Top