Back to intermittent wipers..

[R8rPhan]

Id seriously like a tilt column.. but at the same time, I have a manual and the steering wheel has no clearance issues. And wiring is all good, with the only three electrical components on the column I interact with being the ignition, turn signals, and horn(inop). However, I cant remove the key. So maybe I need to consider. Meh.

My horn is inop too.. I rebuilt the innards as far as the turn signal, the horn and all that, I'm just missing the spring and the button... There are times I need it... I should at least rig something up for temp.. but you know.. lol

 

[EastAustinSawdust]

Following up here. I purchased a refurbished intermittent wiper module + new intermittent wiper switch from [mention]gmachinz [/mention]and finally installed em today. Took 15 minutes to go from 2 speed wipers to intermittent. Plug and play. Very worth it. Thanks [mention]gmachinz [/mention]! Pics below.

Original 2 speed switch:

You must be registered for see images attach

Original switch plugged into harness:

You must be registered for see images attach

New switch (upside down):

You must be registered for see images attach

New switch has receptacles for 2 harnesses (both go to the intermittent module):

You must be registered for see images attach

Intermittent wiper module. I assume it’s some sort of relay.

You must be registered for see images attach

Module plugs into the OEM harness at one end and the switch at the other.

You must be registered for see images attach

And that’s it.


Sent from my iPhone using Tapatalk

 

[AuroraGirl]

Following up here. I purchased a refurbished intermittent wiper module + new intermittent wiper switch from [mention]gmachinz [/mention]and finally installed em today. Took 15 minutes to go from 2 speed wipers to intermittent. Plug and play. Very worth it. Thanks [mention]gmachinz [/mention]! Pics below.

Original 2 speed switch:

You must be registered for see images attach

Original switch plugged into harness:

You must be registered for see images attach

New switch (upside down):

You must be registered for see images attach

New switch has receptacles for 2 harnesses (both go to the intermittent module):

You must be registered for see images attach

Intermittent wiper module. I assume it’s some sort of relay.

You must be registered for see images attach

Module plugs into the OEM harness at one end and the switch at the other.

You must be registered for see images attach

And that’s it.


Sent from my iPhone using Tapatalk

my take away from this whole walkthrough is your dash cluster has a CLOCK.

 

[EastAustinSawdust]

my take away from this whole walkthrough is your dash cluster has a CLOCK.

Yep. Purely ornamental at this point.


Sent from my iPhone using Tapatalk

 

[gmachinz]

Awesome! Happy it all worked out! Those modules are getting very hard to come by too!