750

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

yevgenievich

Full Access Member
Joined
Mar 1, 2014
Posts
4,819
Reaction score
3,400
Location
Place
First Name
Name
Truck Year
Year
Truck Model
Model
Engine Size
Size
Needle and seat replaced and idle fuel mix set back to stock. Also stuffed a bit of steel wool in to the exhaust. Rode around just a bit, but it likes to stall at low speed.
You must be registered for see images attach
 

Jrgunn5150

Questionable methods
Joined
Jan 11, 2016
Posts
2,739
Reaction score
1,412
Location
Ionia Mi
First Name
J.R.
Truck Year
1979
Truck Model
C10
Engine Size
6.slow
Did you use a wire in all the little passages? Mine had a lot of gunk and poo in them, even after sitting overnight in Chemdip.
 

yevgenievich

Full Access Member
Joined
Mar 1, 2014
Posts
4,819
Reaction score
3,400
Location
Place
First Name
Name
Truck Year
Year
Truck Model
Model
Engine Size
Size
I went the lazy route. Will probably get back to it with full disassembly if it is still acting up.

Did you use a wire in all the little passages? Mine had a lot of gunk and poo in them, even after sitting overnight in Chemdip.
 

Jrgunn5150

Questionable methods
Joined
Jan 11, 2016
Posts
2,739
Reaction score
1,412
Location
Ionia Mi
First Name
J.R.
Truck Year
1979
Truck Model
C10
Engine Size
6.slow
Yeah I've had some success just running fuel through them for a time.
 

yevgenievich

Full Access Member
Joined
Mar 1, 2014
Posts
4,819
Reaction score
3,400
Location
Place
First Name
Name
Truck Year
Year
Truck Model
Model
Engine Size
Size
It is slowly clearing up. Just letting it warm up and ride down the street a bit. It is still prone to stalling, so idle is set high.

xc_hide_links_from_guests_guests_error_hide_media
 

yevgenievich

Full Access Member
Joined
Mar 1, 2014
Posts
4,819
Reaction score
3,400
Location
Place
First Name
Name
Truck Year
Year
Truck Model
Model
Engine Size
Size
This thing decided to somewhat give up. Was running this morning and suddenly just died to never start again. Has fuel and weak looking spark.
 

K201979

Full Access Member
Joined
Oct 22, 2018
Posts
879
Reaction score
863
Location
Winona, missouri
First Name
Hippie
Truck Year
1979
Truck Model
K20
Engine Size
350ci
Bad coils or loose connection maybe? Still feels like its got compression?
 

yevgenievich

Full Access Member
Joined
Mar 1, 2014
Posts
4,819
Reaction score
3,400
Location
Place
First Name
Name
Truck Year
Year
Truck Model
Model
Engine Size
Size
Has compression and spark is now fully gone. Need to start tracing the ignition side of the wiring. Was very random, just idling in the driveway and then no more spark
 

K201979

Full Access Member
Joined
Oct 22, 2018
Posts
879
Reaction score
863
Location
Winona, missouri
First Name
Hippie
Truck Year
1979
Truck Model
K20
Engine Size
350ci
I had that xv920 quit me at a gas station before. Took it all apart chasing wires at the station. Still couldnt get it n had a buddy trailer it. Long story short, it ended up being the kill switch wireing. The metal connecter was loose in the plastic conecter and had pulled in two without being visible. Maybe somethin like that. Sounds to me like a wire has rattled out of contact somewhere. Dont forget grounds too. Cant find nothin else id try another known good set of coils. Hope u gettit, good luck!
 

yevgenievich

Full Access Member
Joined
Mar 1, 2014
Posts
4,819
Reaction score
3,400
Location
Place
First Name
Name
Truck Year
Year
Truck Model
Model
Engine Size
Size
The kill switch is on a suspects list. Especially with elec tape poking out from the side
 

yevgenievich

Full Access Member
Joined
Mar 1, 2014
Posts
4,819
Reaction score
3,400
Location
Place
First Name
Name
Truck Year
Year
Truck Model
Model
Engine Size
Size
Still no go, but brake light switch is now fixed. Opened it and cleaned the contacts.
It does have spark, but looks weak. Supposed to look weak according to the forums. Good voltage at the coil. Seem to have fuel, draining fuel bowl on each carb pulls fresh fuel from the tank. But not even an attempt of fire.
You must be registered for see images attach
 

K201979

Full Access Member
Joined
Oct 22, 2018
Posts
879
Reaction score
863
Location
Winona, missouri
First Name
Hippie
Truck Year
1979
Truck Model
K20
Engine Size
350ci
Only thing i can think of is fuel mix being altered by a vac leak or plugged carb passage. Or timing chain jumped(if ohc) but i feal like it would still try to pop off:33: idk but good luck.
 

K201979

Full Access Member
Joined
Oct 22, 2018
Posts
879
Reaction score
863
Location
Winona, missouri
First Name
Hippie
Truck Year
1979
Truck Model
K20
Engine Size
350ci
Good to hear u got it runnin. Be careful on old rubber!
 

Forum statistics

Threads
44,173
Posts
950,853
Members
36,288
Latest member
brentjo
Top