69 C10

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Madhorn

Full Access Member
Joined
Jan 16, 2017
Posts
623
Reaction score
1,335
Location
AR-Arkansas
First Name
Ken
Truck Year
1977
Truck Model
K10
Engine Size
5.3/NV4500/NP205/4:56 gear/35in tires
Picked up a 69 C10 this weekend to go along with my 77 K10. Yes it’s a long bed, I can live with that since it’s in good shape for a 69. I really like it’s patina, so a short bed conversion would end up ruining that. Not to mention, a long to short bed conversion can be pricey. It will need cab corners and rockers on both sides, most trucks of this vintage do. Not sure what direction I want to go with it yet. It has a 350, (not running) and 3 spd standard trans. Thinking for starters I will make it run/drive/stop and drive it as is for awhile. Then down the road do a full frame off with LS conversion. Only time will tell.
 

Attachments

  • 385F8C1E-1E36-4855-AD02-CB24F7B4B295.jpeg
    385F8C1E-1E36-4855-AD02-CB24F7B4B295.jpeg
    207.7 KB · Views: 91
  • C2E6D097-747C-49E4-A06F-48A6D125DCB9.jpeg
    C2E6D097-747C-49E4-A06F-48A6D125DCB9.jpeg
    305.8 KB · Views: 95
  • 4DA7F992-8A29-415A-8F81-F9943E78E307.jpeg
    4DA7F992-8A29-415A-8F81-F9943E78E307.jpeg
    313.7 KB · Views: 91
  • 111E32A1-A028-4890-B7D3-BEE72D558779.jpeg
    111E32A1-A028-4890-B7D3-BEE72D558779.jpeg
    279.1 KB · Views: 85
  • 0843FCCD-1990-47B3-B4AB-E0CA22495113.jpeg
    0843FCCD-1990-47B3-B4AB-E0CA22495113.jpeg
    295.1 KB · Views: 82

Madhorn

Full Access Member
Joined
Jan 16, 2017
Posts
623
Reaction score
1,335
Location
AR-Arkansas
First Name
Ken
Truck Year
1977
Truck Model
K10
Engine Size
5.3/NV4500/NP205/4:56 gear/35in tires
The longbed will ride better as well.
 

Madhorn

Full Access Member
Joined
Jan 16, 2017
Posts
623
Reaction score
1,335
Location
AR-Arkansas
First Name
Ken
Truck Year
1977
Truck Model
K10
Engine Size
5.3/NV4500/NP205/4:56 gear/35in tires
I have never named a vehicle before, but I suggested to my wife that we should call this truck Pig Pen. She failed to see the humor in that.
 

Madhorn

Full Access Member
Joined
Jan 16, 2017
Posts
623
Reaction score
1,335
Location
AR-Arkansas
First Name
Ken
Truck Year
1977
Truck Model
K10
Engine Size
5.3/NV4500/NP205/4:56 gear/35in tires
This truck has sat for over 4 years. I spent some time yesterday doing some forensic diagnostics. Found the purple starter wire had shorted out against the exhaust manifold and was burnt to a crisp. I fixed that and moved on to the normal things one does before cranking an engine that has sat. Oil and filter change, new plugs, removed old points distributor, primed the oil pump, installed an HEI distributor, replaced the carb, then ran a fuel to a can of gas. With just a quick splash of gas down the carb it cranked right up and ran great!! I wanted to go ripping around my yard but the truck had no brakes. Over all it was a great day.
 

Attachments

  • 551278C1-4511-4BAC-BACA-2F5725876C34.jpeg
    551278C1-4511-4BAC-BACA-2F5725876C34.jpeg
    188.6 KB · Views: 72
  • 1E40EC82-6A2C-4E76-80B3-2EE7D9ED2993.jpeg
    1E40EC82-6A2C-4E76-80B3-2EE7D9ED2993.jpeg
    197.6 KB · Views: 81

Madhorn

Full Access Member
Joined
Jan 16, 2017
Posts
623
Reaction score
1,335
Location
AR-Arkansas
First Name
Ken
Truck Year
1977
Truck Model
K10
Engine Size
5.3/NV4500/NP205/4:56 gear/35in tires
Built a cover off the back of my shop to store the 69 until I have room in the shop for it.
 

Attachments

  • A9A70EC1-CF10-48C1-8F01-EE9C87F05009.jpeg
    A9A70EC1-CF10-48C1-8F01-EE9C87F05009.jpeg
    183.4 KB · Views: 71

Madhorn

Full Access Member
Joined
Jan 16, 2017
Posts
623
Reaction score
1,335
Location
AR-Arkansas
First Name
Ken
Truck Year
1977
Truck Model
K10
Engine Size
5.3/NV4500/NP205/4:56 gear/35in tires
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
 

justhorns

Full Access Member
Joined
Jun 1, 2022
Posts
295
Reaction score
789
Location
Denver
First Name
Lee
Truck Year
81
Truck Model
C10
Engine Size
250
When I found my truck (or it found me) I wasn't looking for a truck. The price got me. Friend of the family was moving (original owner, small landscaping business) and offered it to me for "8" I said 8 thousand?!?, they said hundred... Oh, Looking at wife, wife said we'll take it..Its a longbed. Stripper (Only power steering, 6 cylinder, Hurst three on floor) with 70-80000 miles (instruments were stolen, but CArfax shows all service since new). I put a clutch in it, and a few more items. Very happy with "Ralph"
 

SirRobyn0

Full Access Member
Joined
Dec 6, 2019
Posts
6,755
Reaction score
11,402
Location
In the woods in Western Washington
First Name
Rob
Truck Year
1984
Truck Model
C20
Engine Size
305
I personally favor longbeds over shortbeds. Given the choice, I’d take a longbed no matter the resale value.
Ya, me too.
The longbed will ride better as well.
I can haul more stuff in a long bed.
When I found my truck (or it found me) I wasn't looking for a truck. The price got me. Friend of the family was moving (original owner, small landscaping business) and offered it to me for "8" I said 8 thousand?!?, they said hundred... Oh, Looking at wife, wife said we'll take it..Its a longbed. Stripper (Only power steering, 6 cylinder, Hurst three on floor) with 70-80000 miles (instruments were stolen, but CArfax shows all service since new). I put a clutch in it, and a few more items. Very happy with "Ralph"
Lee, That sounds just like my story. I met a couple that lived in Portland in the early 2000's, his rig was a 1984 C20. I never paid to much attention to it, but I knew it had a dump kit on the factory box, and I knew he bought it in the mid-90's. IDK around 08 or 09 I pretty much lost touch with them. Then about 4 years ago another friend of mine mentioned he had passed away. I called her to offer condolences, she said she was moving out of state and had stuff to get rid of one of which was the truck, for $800. Hadn't been run much in the prior few years but ran 6 months ago. We went down I charged the battery fired it off and drove it 100 miles home. I was starting to think about getting a full size truck, but had not looked at all. I knew I was getting a deal but did not realize how good of a deal.
 

Madhorn

Full Access Member
Joined
Jan 16, 2017
Posts
623
Reaction score
1,335
Location
AR-Arkansas
First Name
Ken
Truck Year
1977
Truck Model
K10
Engine Size
5.3/NV4500/NP205/4:56 gear/35in tires
You must be registered for see images attach
You must be registered for see images attach

Pulled the radiator today, of course it’s bad. Lower radiator hose was about to blow due to rubbing on the frame. Battery tray is rotted out and need to be replaced. I did have the fuel tank removed to clean it and put a new sending unit in it. The deeper I get into it the more stuff I find. Oh well, so what if it takes a bit longer to get on the road, truck is still cool as heck.
 

Latest posts

Forum statistics

Threads
44,157
Posts
950,592
Members
36,271
Latest member
jstewart7501
Top