What have you done to your square lately??

Mr Clean · Nov 5, 2024

Got the steering gear back together. Getting all the ball bearings back in is a B I T C H!. Had to do it twice. The front cover lock is a big pain also. But all in all it isn't that hard. Just time consuming. On a scale of 1-10 I give it a 6. I'm very pleased with myself. I'll never buy another steering gear, I'll rebuild from now on.

Mr Clean · Nov 5, 2024

Drauka99 said:
After doing some items on the honey do list I was able to get the truck painted.... well the base color painted. I still need to do the other color for the rockers and the cab roof. This is GM Medium Sage Green from 2003 Avalanches and other vehicles. The roof and rockers are going with GM Covert Tan that was used in 1972 on muscle cars and such.

with the silver and chrome I think it should be a good looking truck. When deciding colors i kind of ran through all my vehicles in my past I have never had a green truck... finding a green that I liked was challenging

You must be registered for see images attach

I would satin clear that, and rock it. Looks good!

Camar068 · Nov 5, 2024

Mr Clean said:
Got the steering gear back together. Getting all the ball bearings back in is a B I T C H!. Had to do it twice. The front cover lick is a big pain also. But all in all it isn't that hard. Just time consuming. On a scale of 1-10 I give it a 6. I'm very pleased with myself. I'll never buy another steering gear, I'll rebuild from now on.

good to hear. I'll keep an eye out for a spare. Was thinking about the redhead, but dang at $316 (plus shipping) w/core. I'll make time for half that.

bucket · Nov 5, 2024

Drauka99 said:
After doing some items on the honey do list I was able to get the truck painted.... well the base color painted. I still need to do the other color for the rockers and the cab roof. This is GM Medium Sage Green from 2003 Avalanches and other vehicles. The roof and rockers are going with GM Covert Tan that was used in 1972 on muscle cars and such.

with the silver and chrome I think it should be a good looking truck. When deciding colors i kind of ran through all my vehicles in my past I have never had a green truck... finding a green that I liked was challenging

You must be registered for see images attach

That's a WONDERFUL choice of color! I'm a big fan of dark metallic greens, especially with gold toned metal flake (as opposed to the typical silver or blue).

bluex · Nov 5, 2024

Mr Clean said:
Got the steering gear back together. Getting all the ball bearings back in is a B I T C H!. Had to do it twice. The front cover lick is a big pain also. But all in all it isn't that hard. Just time consuming. On a scale of 1-10 I give it a 6. I'm very pleased with myself. I'll never buy another steering gear, I'll rebuild from now on.

I've thought about rebuilding my own too but was curious what you do if there's excessive wear in the worm or a few of the balls? Redhead an a few other places make a big deal about fixing that an say most of the wandering issues are caused by that.

Grit dog · Nov 5, 2024

Drauka99 said:
After doing some items on the honey do list I was able to get the truck painted.... well the base color painted. I still need to do the other color for the rockers and the cab roof. This is GM Medium Sage Green from 2003 Avalanches and other vehicles. The roof and rockers are going with GM Covert Tan that was used in 1972 on muscle cars and such.

with the silver and chrome I think it should be a good looking truck. When deciding colors i kind of ran through all my vehicles in my past I have never had a green truck... finding a green that I liked was challenging

You must be registered for see images attach

That color is badass! It’ll look great w the covert tan.

Mr Clean · Nov 5, 2024

bluex said:
I've thought about rebuilding my own too but was curious what you do if there's excessive wear in the worm or a few of the balls? Redhead an a few other places make a big deal about fixing that an say most of the wandering issues are caused by that.

There are replacements parts, that can be bought. I don't see how a solid steel worm gear can wear out with the ball bearings being the only thing riding in it. Maybe if the inside of the case would get bad grit in it. My gear box sat outside for better part of a decade, but it was fine on the inside. A good cleaning will take care any grit you might have.

mtbadbob · Nov 5, 2024

Mr Clean said:
Got the steering gear back together. Getting all the ball bearings back in is a B I T C H!. Had to do it twice. The front cover lock is a big pain also. But all in all it isn't that hard. Just time consuming. On a scale of 1-10 I give it a 6. I'm very pleased with myself. I'll never buy another steering gear, I'll rebuild from now on.

I also did my own, just requires patience & concentration! After I aseembled it & put the seal & cap on, i found a bearing on the floor! Sure enough, it was short one when I disssambled it and counted them. It;s also a bit tough distinguishing between the black & shiney bearings!

ChuckN · Nov 6, 2024

You must be registered for see images attach

Took a ride over to my mom’s place to give her some help. Turns out, Flowmaster 40s and headers tune out the volume of life pretty well. I was working at the bedside in the hospital until 1am, a cruise on a dry day was a real treat.

Bextreme04 · Nov 6, 2024

Mr Clean said:
There are replacements parts, that can be bought. I don't see how a solid steel worm gear can wear out with the ball bearings being the only thing riding in it. Maybe if the inside of the case would get bad grit in it. My gear box sat outside for better part of a decade, but it was fine on the inside. A good cleaning will take care any grit you might have.

I rebuilt mine a few years ago because it was leaking around the input shaft. I did a full rebuild and then did the proper adjustments per the original instructions. It was a little bit tighter and didn't leak for a few months, but then it started leaking again worse than it had before. I finally just did the redhead replacement because I didn't want to take the time to rebuild it again. It was a MASSIVE difference in feel going down the road and also in ease of turning and hasn't leaked again since. Well worth the money in my opinion.

Truck82 · Nov 6, 2024

ChuckN said:
You must be registered for see images attach

Took a ride over to my mom’s place to give her some help. Turns out, Flowmaster 40s and headers tune out the volume of life pretty well. I was working at the bedside in the hospital until 1am, a cruise on a dry day was a real treat.

Beautiful truck, ChuckN!

ChuckN · Nov 6, 2024

Truck82 said:
Beautiful truck, ChuckN!

Thanks! She’s rough around the edges but she’s mine!

JamesSam · Nov 7, 2024

ChuckN said:
You must be registered for see images attach

Took a ride over to my mom’s place to give her some help. Turns out, Flowmaster 40s and headers tune out the volume of life pretty well. I was working at the bedside in the hospital until 1am, a cruise on a dry day was a real treat.

Yes, that truck is Killer. God bless you for being there for your Mom, that's a tough part of life. I know being in the truck for a ride felt great for that.

ChuckN · Nov 7, 2024

JamesSam said:
Yes, that truck is Killer. God bless you for being there for your Mom, that's a tough part of life. I know being in the truck for a ride felt great for that.

Absolutely brother :happy107:

thanks for the compliment, I need to see more of yours!

Truck82 · Nov 7, 2024

I’m replacing the cap and rotor on my distributor this afternoon. This is the first time I’ve done and any tips would be greatly appreciated!

You must be registered for see images attach

What have you done to your square lately??

Mr Clean

Super Moderator

Attachments

Mr Clean

Super Moderator

Camar068

Supporting Member

bucket

Super Moderator

bluex

Full Access Member

Grit dog

Full Access Member

Mr Clean

Super Moderator

mtbadbob

Full Access Member

ChuckN

Full Access Member

Bextreme04

Full Access Member

Truck82

Full Access Member

ChuckN

Full Access Member

JamesSam

Full Access Member

ChuckN

Full Access Member

Truck82

Full Access Member

Similar threads

Latest posts

Forum statistics