Valve covers

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

gerhed

gerhed

Full Access Member
Joined
Jul 7, 2024
Posts
62
Reaction score
165
Location
Kentucky
First Name
Jason
Truck Year
1983
Truck Model
K20
Engine Size
350
No questions, just showing what I'm up to. I replaced the gaskets on these valve covers back in the early 90s, so no shock that the gaskets dried out and started leaking. I guess my dad tried tightening them down while I was on the service, especially the driver side, lol. I know I didn't put them on that tight. Anywho, teaching moment for the boy, 13 now. He will probably never have to work on stamped steel valve covers, but he'll know what not to do if he comes across a set that leaks. They gotta be flat around the bolt holes. Here's some pictures of my improvised anvil and my boy learning to hammer out puckers around a bolt hole. Just look at that boy go. I showed him how to do two, and he did the other 6. We do the Holley 750 next. Stay tuned folks, we got an old truck or two, a lotta shop space, and a curious 13 year old I homeschool. Hope y'all enjoy the show.
 

Attachments

  • IMG_20240918_123941253_HDR.jpg
    IMG_20240918_123941253_HDR.jpg
    110.1 KB · Views: 49
  • IMG_20240918_124008106_HDR.jpg
    IMG_20240918_124008106_HDR.jpg
    202.1 KB · Views: 53
  • IMG_20240918_134555208_HDR.jpg
    IMG_20240918_134555208_HDR.jpg
    241.8 KB · Views: 51
  • IMG_20240918_134803210_HDR.jpg
    IMG_20240918_134803210_HDR.jpg
    163.2 KB · Views: 53
gerhed

gerhed

Full Access Member
Joined
Jul 7, 2024
Posts
62
Reaction score
165
Location
Kentucky
First Name
Jason
Truck Year
1983
Truck Model
K20
Engine Size
350
Little black paint hides a multitude of sins, lol. We'll be replacing them in the future anyway. Gaskets glued on to the covers, let them set a bit. Studs for valve cover installed. Be using spreader bars too. More to come.
 

Attachments

  • IMG_20240918_140015849_HDR.jpg
    IMG_20240918_140015849_HDR.jpg
    256 KB · Views: 38
  • IMG_20240919_110511391_HDR.jpg
    IMG_20240919_110511391_HDR.jpg
    175.4 KB · Views: 38
gerhed

gerhed

Full Access Member
Joined
Jul 7, 2024
Posts
62
Reaction score
165
Location
Kentucky
First Name
Jason
Truck Year
1983
Truck Model
K20
Engine Size
350
Ok, got all the pieces back on we wanted to keep, the rest goes into he trash, especially that quadrajet. Great when they work right, but I don't have the best luck with them. I have good luck with a Holley. Fuel line issues to work out, some linkage too, and it's back on the road.
 
gerhed

gerhed

Full Access Member
Joined
Jul 7, 2024
Posts
62
Reaction score
165
Location
Kentucky
First Name
Jason
Truck Year
1983
Truck Model
K20
Engine Size
350
And tires, we put tires on it today. 33x9.45x16 buckshot mudders.
 

Attachments

  • IMG_20240919_111122440_HDR.jpg
    IMG_20240919_111122440_HDR.jpg
    178 KB · Views: 45
  • IMG_20240919_123123569_HDR.jpg
    IMG_20240919_123123569_HDR.jpg
    191.9 KB · Views: 43
  • IMG_20240919_133736437.jpg
    IMG_20240919_133736437.jpg
    172.6 KB · Views: 38
Oldbear42

Oldbear42

Supporting Member
Supporting Member
Joined
Feb 15, 2024
Posts
196
Reaction score
506
Location
Linden, Alberta, Canada
First Name
Shaine
Truck Year
1981
Truck Model
C20 LWB Scottsdale
Engine Size
350
I have valve covers on my list for this Saturday. And I will be sorting the vacuum lines - lots of the emissions lines are still there, but none of the emissions stuff. Trying to stop oil and vacuum leaks all on the same day...
 
gerhed

gerhed

Full Access Member
Joined
Jul 7, 2024
Posts
62
Reaction score
165
Location
Kentucky
First Name
Jason
Truck Year
1983
Truck Model
K20
Engine Size
350
She is just pouring oil from around the oil pan. Those gaskets are dried out too. The two oil pans are for the transfer case, which gets replaced around the end of this month.

All this is over night, not even a full 24 hours, lol.
 

Attachments

  • IMG_20240923_062415847.jpg
    IMG_20240923_062415847.jpg
    255.2 KB · Views: 18
  • IMG_20240923_062424200.jpg
    IMG_20240923_062424200.jpg
    219.8 KB · Views: 19
R

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,451
Reaction score
8,695
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
gerhed said:
She is just pouring oil from around the oil pan. Those gaskets are dried out too. The two oil pans are for the transfer case, which gets replaced around the end of this month.

All this is over night, not even a full 24 hours, lol.
Click to expand...
Check your oil pressure sender 1st,the oil will run down the back of the block and track along the oil pan ridge. I'd make sure the oil isn't running down externally first. O.P sender is a much more common leak. Also make sure pcv is operating properly.
 
gerhed

gerhed

Full Access Member
Joined
Jul 7, 2024
Posts
62
Reaction score
165
Location
Kentucky
First Name
Jason
Truck Year
1983
Truck Model
K20
Engine Size
350
Ricko1966 said:
Check your oil pressure sender 1st,the oil will run down the back of the block and track along the oil pan ridge. I'd make sure the oil isn't running down externally first. O.P sender is a much more common leak. Also make sure pcv is operating properly.
Click to expand...
Hadn't even crossed my mind. Good advice, will check next.
 
gerhed

gerhed

Full Access Member
Joined
Jul 7, 2024
Posts
62
Reaction score
165
Location
Kentucky
First Name
Jason
Truck Year
1983
Truck Model
K20
Engine Size
350
Ricko1966 said:
Check your oil pressure sender 1st,the oil will run down the back of the block and track along the oil pan ridge. I'd make sure the oil isn't running down externally first. O.P sender is a much more common leak. Also make sure pcv is operating properly.
Click to expand...
Well, you were right. It was loose. I was afraid I may have messed up the valve covers. Dried up everywhere but the front main seal on the timing cover.
 
You must log in or register to reply here.

Similar threads

TX87R10
Recommendations while tearing down for valve job?
Replies
10
Views
599
TX87R10
TX87R10
410 John
305 HO valve covers?
Replies
10
Views
954
CalSgt
C
T
Proportion valve question
Replies
9
Views
661
Toad455
T
ChuckN
What are your favorite/ best looking valve covers for SBC?
2 3
Replies
44
Views
6K
Rusty Nail
Rusty Nail
B
Replacing 454 gaskets opinion
Replies
11
Views
616
Byard-HWJ
B

Latest posts

Forum statistics

Threads
44,168
Posts
950,764
Members
36,283
Latest member
Cantrell299
Top