What have you done to your square lately??

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Camar068

Camar068

Supporting Member
Supporting Member
Joined
Feb 5, 2014
Posts
4,293
Reaction score
3,339
Location
Kentucky
First Name
David
Truck Year
1986
Truck Model
K10/LM7 5.3/4L60e/np208/3.73/32"
Engine Size
10 yrs Air Force
Ran wiring for the winch. Probably make a "Y" to run a pump to a 30 gallon tank for fresh water. All for deer season.

You must be registered for see images attach
 
mattsk8

mattsk8

Full Access Member
Joined
Jun 5, 2024
Posts
172
Reaction score
448
Location
Michigan
First Name
Matt
Truck Year
1986
Truck Model
K20
Engine Size
350
Snoots said:
Gotta say I've never heard of a IM acting flaky. Either they worked or, they didn't.
Click to expand...
Years ago I had an 87 Cougar do a similar thing. First time I've had a HEI do this too.
 
mattsk8

mattsk8

Full Access Member
Joined
Jun 5, 2024
Posts
172
Reaction score
448
Location
Michigan
First Name
Matt
Truck Year
1986
Truck Model
K20
Engine Size
350
justhorns said:
I replaced my cheapo ignition module and put a delco one in. Took the cheapo one and threw it in the glove box.
Click to expand...
The one I took out was an Accel, came with the distributor. I replaced it with an AC Delco.
 
ChuckN

ChuckN

Full Access Member
Joined
Nov 8, 2022
Posts
1,323
Reaction score
4,039
Location
Bellinham, WA
First Name
Chad
Truck Year
1981
Truck Model
C10
Engine Size
350
mattsk8 said:
Can you guys hear that?...
...
...
...
...
That's the sound of my truck running:rockit:
It was the stupid ignition module.

You must be registered for see images attach
Click to expand...
I changed mine, kept it, and have a new one in the glove box.
 
JamesSam

JamesSam

Full Access Member
Joined
Feb 15, 2023
Posts
1,609
Reaction score
4,409
Location
VA
First Name
Sam
Truck Year
1987
Truck Model
Silverado V10
Engine Size
5.7 L 350 v8
So I got the connector switch wired in for drivers power window. Then old regulator is toast. New regulator was ordered on a whim because it was only $40 but it does not line up directly to the power motor mounts. I was looking in to slotting mount holes but now think I will attempt to return the aftermarket regulator to LMC and try a OEM regulator from Classic Industries and hope it ligns up correctly. I don't want to do this again in a month. I am betting on the original specs for the OEM actually lining up. Anyone have knowledge of OEM replacement regulators? I have only worked with my trucks original, that now does not work. Oh and of course the re-pop that is not made quite right.
 
ChuckN

ChuckN

Full Access Member
Joined
Nov 8, 2022
Posts
1,323
Reaction score
4,039
Location
Bellinham, WA
First Name
Chad
Truck Year
1981
Truck Model
C10
Engine Size
350
JamesSam said:
So I got the connector switch wired in for drivers power window. Then old regulator is toast. New regulator was ordered on a whim because it was only $40 but it does not line up directly to the power motor mounts. I was looking in to slotting mount holes but now think I will attempt to return the aftermarket regulator to LMC and try a OEM regulator from Classic Industries and hope it ligns up correctly. I don't want to do this again in a month. I am betting on the original specs for the OEM actually lining up. Anyone have knowledge of OEM replacement regulators? I have only worked with my trucks original, that now does not work. Oh and of course the re-pop that is not made quite right.
Click to expand...
Man that’s frustrating.
 
mattsk8

mattsk8

Full Access Member
Joined
Jun 5, 2024
Posts
172
Reaction score
448
Location
Michigan
First Name
Matt
Truck Year
1986
Truck Model
K20
Engine Size
350
JamesSam said:
So I got the connector switch wired in for drivers power window. Then old regulator is toast. New regulator was ordered on a whim because it was only $40 but it does not line up directly to the power motor mounts. I was looking in to slotting mount holes but now think I will attempt to return the aftermarket regulator to LMC and try a OEM regulator from Classic Industries and hope it ligns up correctly. I don't want to do this again in a month. I am betting on the original specs for the OEM actually lining up. Anyone have knowledge of OEM replacement regulators? I have only worked with my trucks original, that now does not work. Oh and of course the re-pop that is not made quite right.
Click to expand...
I have some power doors but they're up at work. My doors are completely shot, but I kept them because they had all the power window stuff. I'd be glad to take pics or measurements for you but I won't be back there until Tuesday.

And while I'm posting I may as well vent a new frustration... I changed my fuel pump hoping that was my stalling issue, used a cheap, $30 pump from a Parts Plus store. Now my fuel pressure is only 3 psi :thumbsdown:. I'm going to drive it today because I'm lazy and I'm curious how it'll respond to that, but I'll be putting my old Carter M6626 fuel pump back on it. Good grief these new parts are junk.
 
Last edited:
82sbshortbed

82sbshortbed

Fuckemall!!
Joined
Mar 1, 2018
Posts
15,828
Reaction score
53,162
Location
SE Texas
First Name
Doug
Truck Year
1982, 1984
Truck Model
1500 shortbed, 1500 longbed
Engine Size
454, 305
xc_hide_links_from_guests_guests_error_hide_media

Installed the new fog lights last weekend but this is the first time I've drove it at night to do a test run around the block. They're really Brite as I just had the parking lights on too. I was worried that they might fog up but we've had rain and no fogging yet. These are a good deal for the money.

You must be registered for see images attach
 
1

1STLS1

Full Access Member
Joined
Dec 9, 2018
Posts
207
Reaction score
505
Location
West Phoenix AZ
First Name
MIchael
Truck Year
1985
Truck Model
K10
Engine Size
350
Had the wife put a new seat cover on the 2 tones front seat. Had tried to order from Jegs but even though they state the color is charcoal, it's really gray and does not match the door panels and carpet.. This came from USA1


You must be registered for see images attach
 
JamesSam

JamesSam

Full Access Member
Joined
Feb 15, 2023
Posts
1,609
Reaction score
4,409
Location
VA
First Name
Sam
Truck Year
1987
Truck Model
Silverado V10
Engine Size
5.7 L 350 v8
So it looks like LMC sent me a regulator for 77-81 not 82-87. I am calling customer service and sending back. Should I have them exchange and send the correct piece or order one from elsewhere that is OER and just get my money back from LMC? LMC does not claim OER.
 
ChuckN

ChuckN

Full Access Member
Joined
Nov 8, 2022
Posts
1,323
Reaction score
4,039
Location
Bellinham, WA
First Name
Chad
Truck Year
1981
Truck Model
C10
Engine Size
350
JamesSam said:
So it looks like LMC sent me a regulator for 77-81 not 82-87. I am calling customer service and sending back. Should I have them exchange and send the correct piece or order one from elsewhere that is OER and just get my money back from LMC? LMC does not claim OER.
Click to expand...
I don’t know if LMC quality is good these days but if it’s average at best it’s probably better than OER. Which is a shame because the guys at Classic Industries/OER are typically more helpful than LMC.
 
You must log in or register to reply here.

Similar threads

Strick
What I have done to my Square lately…
Replies
1
Views
240
Strick
Strick
S
Oops. Probably shouldn't have done that.
Replies
11
Views
2K
dsteelejr
dsteelejr
Randy and Easton
  • Sticky
Easton Is Graduating Thank You all for your help GMSB!!
2 3
Replies
31
Views
4K
Randy and Easton
Randy and Easton
D
Thank you post to y'all.
Replies
3
Views
1K
Catbox
Catbox
RanchWelder
Identifying GM Transfer Cases: Show us in pictures what you have with measurments and Adapters.
2
Replies
19
Views
5K
dragstews
dragstews

Latest posts

Forum statistics

Threads
44,173
Posts
950,864
Members
36,288
Latest member
brentjo
Top