Craig Nedrow's latest activity
-
But clearly seeing they are out is a lot different than them actually being toed out. It happens very often, where people look at their... -
Craig Nedrow replied to the thread Toe adjustment 1987 V10.I use a Starrett 12" square blade and "calibrate" all my tape measures by bending the front hook tab. You can measure within .015 easy...
-
Use 2 tape measures,pulled taught and compare reading front and back. I made these over and have used them for over 30 years now. No...
-
Eyeballing it until I can dial it in, it looks way off as it sits, both tires pointing outward a good bit
-
Craig Nedrow replied to the thread Headers and O2 sensor.I do have a small cam, and an E-brock airgap/ 750 Holly 1450, but the 1 7/8 headers helped. I use a Bosch and AEM A/F meter to calibrate...
-
-
Decades of independent testing has shown that long tube headers often produce gains in power, even on bone-stock engines and often in...
-
It should be a TBI 305,and a single wire O2 sensor,so it's going to have to stay fairly stock to run the TBI. That means no big cam,if...
-
If you have a heated sensor it can be farther down the pipe, away from the exhaust manifold, since it does not rely on engine heat to...
-
On a 454 I'd want headers. I was thinking you were 305.
-
My autometer kit has a Bosch sensor and says they want it right after the manifold collector in the pipe. Or for headers, on the...
-
Craig Nedrow replied to the thread 80 sq body.I bought a Milwaukee buffer, best thing I ever bought for buffing, which is what I would do. Wax that thing, it will look awesome the...
-
-
You couldn't get a shortbed in a 3/4 ton. So it's either a K20 that's been cut down - or - (more likely) a K10 with 3/4 ton axles. K
-
I’d go ride that dirt bike first and then buff out the green paint then wax. Nice rides and good to be back home where it belongs.
-
My cousin bought this truck brand new and really wanted a 3/4 ton, at the time, our local dealership couldn't get one, so he basically...
-
Newbie here. I've owned this truck for 32 years, sold it and just bought it back. 454 4 speed granny 3/4 ton
