Craig Nedrow's latest activity
-
Craig Nedrow replied to the thread 14bolt FF size vs 10bolt.Looks like a Dana, as it has the spreader holes, D60 fronts are rare, wish I had one too, so it is most likely a D44. Make sure it has... -
No, the 8 lug caliper bracket is physically bigger.
-
For an 8 lug front, the hardest part to source will be the backing plate. No known aftermarket repops at this time. You’ll need a large...
-
You'll need an 8 lug version caliper mounting bracket. The 8 lug rotor is larger and the caliper mount will move the caliper out...
-
Rotors will need to be 8 lug rotors, they are a little larger than 1/2 ton 6 lug rotors are. Calipers should physically interchange but...
-
The “261” on the bottom of that tag denotes the low range gear ratio - 2.61:1.
-
The 208 was used from '81 to '88. Then the 241 was used after that. No 261 in these trucks. Yes, the 14 bolt diff is bigger, but the...
-
I’m thinking he has a 208. If not, we need to figure out what front axle he has.
-
Are you sure? I believe the 261 is a drivers side drop
-
NP 208 transfer case? Weld in new spring perches with the proper pinion angle. Measure and order a new driveshaft from a vendor of your...
-
Yes, the 14BFF yoke is(I think) about 2-3" longer than a 10 bolt one. You will want to check driveline angles also before you bolt...
-
Craig Nedrow replied to the thread Skool me on timing w/o timing tab.Use high breakin oil, like Driven, do just what Ricko said, it's exactly what I do. Also make or buy a oil pump priming tool.
-
-
Craig Nedrow replied to the thread Buying a rebuilt transmission th350.Very cool writeup Hotrod, now I know you a little better. Wish I was closer Doug, would give ya a hand. I to had a Muncie with Hurst...
-
-
Craig Nedrow reacted to HotRodPC's post in the thread Buying a rebuilt transmission th350 with
Like.
hahaha, but wait, you can't put a Th350 behind a Big Block. Just can't do it. It won't hold up. :lol: Yeah well, I call BS too. Back in... -
Craig Nedrow replied to the thread Buying a rebuilt transmission th350.I built mine with an ATSG 350 book, and a HP books Rebuilding your Turbo-Hydro 350, Wished I had had Nick back then. Listen to the...
