WTB 1981+ 4x4 Trans Tunnel

[EvilGenius]

I have a 1983 c10 cab that has been used for a donor in my k10 rebuild. To clear the transfer case, I need the higher center floor section used in 4x4s. After some research it looks like 1981-1983 or 1984-1987 floor pan sections would work.

I've searched in my area for a parts yard that has one I can cut up, but none of the ones around here allow cutting tools in the yard or they don't have any of these trucks.

Anyone have an old 4x4 cab sitting around that they could cut up the floor on?

 

[ajd89]

Ive got one in decent shape other then where someone cut the area around the shifter. To change the clutch and just pealed back the top. But im probably 2 hours from you.

 

[EvilGenius]

You have any pictures of the damage? I don't mind beating it back into shape a little. I plan on carpeting my interior.

 

[ajd89]

I can get some tonight when I get home

 

[Big Chip]

I still have this beauty if you can make it work too. I'm not privy to the differences in the newer cabs since I only have the coolest year but if @ajdemello doesn't have what you need maybe you can make this work.
www.gmsquarebody.com/threads/bolt-in-trans-tunnel.24379/

 

[EvilGenius]

Thanks for the offer @Big Chip but unfortunately that won't work for me. Big floor changes happened between 80 and 81. Plus, even if that did work I would still need the rear section that runs under the seat since that is part of the difference in floor pan design between 2wd and 4wd

 

[ajd89]

Here ya go


@Big Chip Get carried away with the reply button? Lol

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[Big Chip]

The forum was really ******* up earlier and it never indicated anything sent. I guess a visit to the rant thread is in order. This forum has really sucked for the last few hours.

 

[EvilGenius]

@ajdemello That looks great to me. I have an auto trans anyway so I can just patch up the shifter hole completely. Do you know what year it is out of? How much do you want for it?

 

[ajd89]

@ajdemello That looks great to me. I have an auto trans anyway so I can just patch up the shifter hole completely. Do you know what year it is out of? How much do you want for it?

Came from a 87. And idk 60 bucks sound fair? You gonna pick it up? Ill be by lansing this weekend might be a little closer for you.

 

[EvilGenius]

@ajdemello $60 sounds fair to me. I'd be happy to meet up in Lansing if we can make it work. PM the details and we can work out a meeting place. I'm willing to travel.