Write up: Gas Tank Relocation

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

junkyardog05

Full Access Member
Joined
Feb 21, 2013
Posts
143
Reaction score
4
Location
Tennessee
First Name
Keith
Truck Year
1985
Truck Model
K30
Engine Size
454/ 400 turbo/ NP203
I know this is an old thread revival but could you use the 40 gallon tank to do this same mod and also how did the filler neck in the bed look after finishing?

Thanks
 

Old77

Administrator
Staff member
Admin
Joined
Aug 19, 2010
Posts
28,458
Reaction score
9,433
Location
Kansas City, Mo
First Name
Jacob
Truck Year
1977/1990/1991
Truck Model
C10 longbed/R1500 Burb/R3500 Dually
Engine Size
350/350/454
there are MANY ways to finish off the filler neck. I still wouldn't consider mine finished off but it is a project for the future to truly finish it off. The sky is the limit on it and is only limited by creativity and/or skill needed. Mine is currently set up just to be functional. It'll be cleaned up at some point to be a nicer set up.
 

89Suburban

Supporting Member
Supporting Member
Joined
Dec 7, 2010
Posts
24,772
Reaction score
6,637
Location
Southeast PA
First Name
Paw Paw
Truck Year
2007
Truck Model
Chevrolet Tahoe LT
Engine Size
5.3, 4WD
there are MANY ways to finish off the filler neck. I still wouldn't consider mine finished off but it is a project for the future to truly finish it off. The sky is the limit on it and is only limited by creativity and/or skill needed. Mine is currently set up just to be functional. It'll be cleaned up at some point to be a nicer set up.

That's why we call you "Half-Way Cob" LOL :gathering:
 

Old77

Administrator
Staff member
Admin
Joined
Aug 19, 2010
Posts
28,458
Reaction score
9,433
Location
Kansas City, Mo
First Name
Jacob
Truck Year
1977/1990/1991
Truck Model
C10 longbed/R1500 Burb/R3500 Dually
Engine Size
350/350/454

Old77

Administrator
Staff member
Admin
Joined
Aug 19, 2010
Posts
28,458
Reaction score
9,433
Location
Kansas City, Mo
First Name
Jacob
Truck Year
1977/1990/1991
Truck Model
C10 longbed/R1500 Burb/R3500 Dually
Engine Size
350/350/454
For what it's worth, the plan is to eventually route it to behind the taillight and have the taillight flip out. I saw it over on SB.com and was a pretty trick setup. I just need to buckle down and get her done. I'm almost there as is.
 

HotRodPC

Administrator
Staff member
Admin
Joined
Aug 29, 2010
Posts
47,128
Reaction score
9,299
Location
OKC, OK
First Name
HotRod
Truck Year
85 K20 LWB
Truck Model
Silverado
Engine Size
454 - Turbo 400 - 3.73
I'd say for a fact the 40 will not fit a short bed for certain. But I'm going to sure try on a long bed. I'm dropping the tank on this burb anyway cuz its three quarters full. That's damn near 30 gallons of fuel worth over $90.

Sent from my SAMSUNG-SGH-I747 using Tapatalk
 

89Suburban

Supporting Member
Supporting Member
Joined
Dec 7, 2010
Posts
24,772
Reaction score
6,637
Location
Southeast PA
First Name
Paw Paw
Truck Year
2007
Truck Model
Chevrolet Tahoe LT
Engine Size
5.3, 4WD
I'd say for a fact the 40 will not fit a short bed for certain. But I'm going to sure try on a long bed. I'm dropping the tank on this burb anyway cuz its three quarters full. That's damn near 30 gallons of fuel worth over $90.

Sent from my SAMSUNG-SGH-I747 using Tapatalk

Run a rubber fuel line off the line at the TBI and run it right into the other truck with the pump. That's how I emptied the '89 tank into Silvy. :D
 

HotRodPC

Administrator
Staff member
Admin
Joined
Aug 29, 2010
Posts
47,128
Reaction score
9,299
Location
OKC, OK
First Name
HotRod
Truck Year
85 K20 LWB
Truck Model
Silverado
Engine Size
454 - Turbo 400 - 3.73
Awesome. I was wondering if that would work. I guess I can run about 8 gallons left the fuel pump rest. Then do another 8 to 10 gallons and let it rest. I don't want to burn up the fuel pump just letting it run free for all for 30 gallons of fuel.

Sent from my SAMSUNG-SGH-I747 using Tapatalk
 

89Suburban

Supporting Member
Supporting Member
Joined
Dec 7, 2010
Posts
24,772
Reaction score
6,637
Location
Southeast PA
First Name
Paw Paw
Truck Year
2007
Truck Model
Chevrolet Tahoe LT
Engine Size
5.3, 4WD
Awesome. I was wondering if that would work. I guess I can run about 8 gallons left the fuel pump rest. Then do another 8 to 10 gallons and let it rest. I don't want to burn up the fuel pump just letting it run free for all for 30 gallons of fuel.

Sent from my SAMSUNG-SGH-I747 using Tapatalk

Yeah that won't hurt, but it should be a walk in the park for the pump since it isn't under pressure. :)
 

HotRodPC

Administrator
Staff member
Admin
Joined
Aug 29, 2010
Posts
47,128
Reaction score
9,299
Location
OKC, OK
First Name
HotRod
Truck Year
85 K20 LWB
Truck Model
Silverado
Engine Size
454 - Turbo 400 - 3.73
Wishful thinking. I disconnected the fuel line I have a hose on it TV is on and it's only pumping fuel when I'm turning the key.

Sent from my SAMSUNG-SGH-I747 using Tapatalk
 

89Suburban

Supporting Member
Supporting Member
Joined
Dec 7, 2010
Posts
24,772
Reaction score
6,637
Location
Southeast PA
First Name
Paw Paw
Truck Year
2007
Truck Model
Chevrolet Tahoe LT
Engine Size
5.3, 4WD
You got the right fuel line hooked up? I might have hot wired the relay, i can't remember.
 

HotRodPC

Administrator
Staff member
Admin
Joined
Aug 29, 2010
Posts
47,128
Reaction score
9,299
Location
OKC, OK
First Name
HotRod
Truck Year
85 K20 LWB
Truck Model
Silverado
Engine Size
454 - Turbo 400 - 3.73
You got the right fuel line hooked up? I might have hot wired the relay, i can't remember.

I do believe it's the main feed line to the back of the TBI coming in from the passenger side of the block right??? I'm pretty sure that's it.
 

89Suburban

Supporting Member
Supporting Member
Joined
Dec 7, 2010
Posts
24,772
Reaction score
6,637
Location
Southeast PA
First Name
Paw Paw
Truck Year
2007
Truck Model
Chevrolet Tahoe LT
Engine Size
5.3, 4WD
There should be 2 lines and the look the same, one is a return line.
 

HotRodPC

Administrator
Staff member
Admin
Joined
Aug 29, 2010
Posts
47,128
Reaction score
9,299
Location
OKC, OK
First Name
HotRod
Truck Year
85 K20 LWB
Truck Model
Silverado
Engine Size
454 - Turbo 400 - 3.73
Well ****. Went out and disconnected the other line, and NO, i'm on the right line. If pushes some fuel out while in the cranking mode, but not much and none at all in just the ON position. I was sure hoping it would work.

Speaking of fuel lines. I guess I should try to try and save all the fuel line I can from the Burb for the K10 huh? Cuz it needs to be high pressure line. I'll have to replace all the fuel line on the K10 to be TBI compatible.
 

Forum statistics

Threads
44,174
Posts
950,893
Members
36,291
Latest member
tannerscarber
Top